Lead dissolved in water must be removed in order not to cause diseases, especially from high pH aqueous solution. Various oxides having high specific surface area are often applied to remove lead in water media. To improve removal ability for lead species, it is necessary to understand the adsorbed structure of lead species on oxides. At first, the adsorption behavior of lead from high pH solution in the presence of Ca 2+ and Na+ was compared. Lead and calcium species were adsorbed up to the monolayer, and the adsorption isotherm was analyzed as Langmuir-type adsorption. In the presence of Ca 2+ , the amount of removed lead was reduced. To clarify this influence of Ca 2+ , X-ray absorption spectroscopy was adopted. It was for the first time revealed that lead species at pH > 12 and pH < 10.5 differed, and that lead species adsorbed on various oxides had a similar structure.
Nowak, B., Pessl, A., Aschenbrenner, P., Szentannai, P., Mattenberger, H., Rechberger, H., Hermann, L. and Winter, F. (2010) Heavy Metal Removal from Municipal Solid Waste Fly Ash by Chlorination and Thermal Treatment. Journal of Hazardous Materials, 179, 323-331. https://doi.org/10.1016/j.jhazmat.2010.03.008
Wang, L., Jin, Y. and Nie, Y. (2010) Investigation of Accelerated and Natural Carbonation of MSWI Fly Ash with a High Content of Ca. Journal of Hazardous Materials, 174, 334-343. https://doi.org/10.1016/j.jhazmat.2009.09.055
Karin, K.F., Christian, E., Gunnar, S. and Britt-Marie, S. (2010) Removal of Hazardous Metals from MSW Fly Ash—An Evaluation of Ash Leaching Methods. Journal of Hazardous Materials, 173, 310-317. https://doi.org/10.1016/j.jhazmat.2009.08.094
Olli, D., Hannu, N., Risto, P. and Gary, W. (2009) Comparison of the Characteristics of Bottom Ash and Fly Ash from a Medium-Size (32 MW) Municipal District Heating Plant Incinerating Forest Residues and Peat in a Fluidized-Bed Boiler. Fuel Processing Technology, 90, 871-878. https://doi.org/10.1016/j.fuproc.2009.04.013
Kamikita, M. (2005) Haikibutsu Shori Houhou. JP2005-3683025.
Pena, M., Meng, X., Korfiatis, G.P. and Jing, C. (2006) Adsorption Mechanism of Arsenic on Nanocrystalline Titanium Dioxide. Environmental Science & Technology, 40, 1257-1262. https://doi.org/10.1021/es052040e
Wijnja, H. and Schulthessy, C.P. (2000) Vibrational Spectroscopy Study of Selenate and Sulfate Adsorption Mechanisms on Fe and Al (Hydr)oxide Surfaces. Journal of Colloid and Interface Science, 229, 286-297. https://doi.org/10.1006/jcis.2000.6960
Mustafa, S., Shahida, P., Naeem, A., Dilara, B. and Rehana, N. (2002) Sorption Studies of Divalent Metal Ions on ZnO. Langmuir, 18, 2254-2259. https://doi.org/10.1021/la0014149
Criscenti, L.J. and Sverjensky, D.A. (2002) A Single-Site Model for Divalent Transition and Heavy Metal Adsorption over a Range of Metal Concentrations. Journal of Colloid and Interface Science, 253, 329-352. https://doi.org/10.1006/jcis.2002.8529
Shakhapure, J., Vijayanand, H., Basavaraja, S. and Hiremath, V. (2005) Uses of α-Fe2O3 and Fly Ash as Solid Adsorbents. Bulletin of Materials Science, 28, 713-718. https://doi.org/10.1007/BF02708542
Lin, L.C., Thirumavalavan, M., Wang, Y.T. and Lee, J.F. (2010) Surface Area and Pore Size Tailoring of Mesoporous Silica Materials by Different Hydrothermal Treatments and Adsorption of Heavy Metal Ions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 369, 223-231. https://doi.org/10.1016/j.colsurfa.2010.08.032
Thirumavalavan, M., Wang, Y.T., Lin, L.C. and Lee, J.F. (2011) Monitoring of the Structure of Mesoporous Silica Materials Tailored Using Different Organic Templates and Their Effect on the Adsorption of Heavy Metal Ions. The Journal of Physical Chemistry C, 115, 8165-8174. https://doi.org/10.1021/jp200029g
Ma, Z., Ji, H., Teng, Y., Dong, G., Zhou, J., Tan, D. and Qiu, J. (2011) Engineering and Optimization of Nano- and Mesoporous Silica Fibers Using Sol-Gel and Electrospinning Techniques for Sorption of Heavy Metal Ions. Journal of Colloid and Interface Science, 358, 547-553. https://doi.org/10.1016/j.jcis.2011.02.066
Xia, K., Ferguson, R.Z., Losier, M., Tchoukanova, N., Bruening, R. and Djaoued, Y. (2010) Synthesis of Hybrid Silica Materials with Tunable Pore Structures and Morphology and Their Application for Heavy Metal Removal from Drinking Water. Journal of Hazardous Materials, 183, 554-564. https://doi.org/10.1016/j.jhazmat.2010.07.060
Stathi, P., Dimos, K., Karakassides, M.A. and Deligiannakis, Y. (2010) Mechanism of Heavy Metal Uptake by a Hybrid MCM-41 Material: Surface Complexation and EPR Spectroscopic Study. Journal of Colloid and Interface Science, 343, 374-380. https://doi.org/10.1016/j.jcis.2009.11.029
Ma, T.Y., Zhang, X.J. and Yuan, Z.Y. (2009) High Selectivity for Metal Ion Adsorption: From Mesoporous Phosphonated Titanias to Meso-/Macroporous Titanium Phosphonates. Journal of Materials Science, 44, 6775-6785. https://doi.org/10.1007/s10853-009-3576-7
Showkat, A.M., Zhang, Y.P., Kim, M.S., Gopalan, A.I., Reddy, K.R. and Lee, K.P. (2007) Analysis of Heavy Metal Toxic Ions by Adsorption onto Amino-Functionalized Ordered Mesoporous Silica. Bulletin of the Korean Chemical Society, 28, 1985-1992. https://doi.org/10.5012/bkcs.2007.28.11.1985
Zhang, L., Yu, C., Zhao, W., Hua, Z., Chen, H., Li, L. and Shi, J. (2007) Preparation of Multi-Amine-Grafted Mesoporous Silicas and Their Application to Heavy Metal Ions Adsorption. Journal of Non-Crystalline Solids, 353, 4055-4061. https://doi.org/10.1016/j.jnoncrysol.2007.06.018
Sayari, A., Hamoudi, S. and Yang, Y. (2005) Applications of Pore-Expanded Mesoporous Silica. 1. Removal of Heavy Metal Cations and Organic Pollutants from Wastewater. Chemistry of Materials, 17, 212-216. https://doi.org/10.1021/cm048393e
Liu, A.M., Hidajat, K., Kawi, S. and Zhao, D.Y. (2000) A New Class of Hybrid Mesoporous Materials with Functionalized Organic Monolayers for Selective Adsorption of Heavy Metal Ions. Chemical Communications, 230, 1145-1146. https://doi.org/10.1039/b002661l
Brown, J., Richer, R. and Mercier, L. (2000) One-Step Synthesis of High Capacity Mesoporous Hg2+ Adsorbents by Non-Ionic Surfactant Assembly. Microporous and Mesoporous Materials, 37, 41-48. https://doi.org/10.1016/S1387-1811(99)00191-2
Mercier, L. and Pinnavaia, T.J. (1997) Access in Mesoporous Materials: Advantages of a Uniform Pore Structure in the Design of a Heavy Metal Ion Adsorbent for Environmental Remediation. Advanced Materials, 9, 500-503. https://doi.org/10.1002/adma.19970090611
Jhon, Q.T., Averlant, R., Giraudon, J.M. and Lamonjer, J.F. (2010) Mesoporous Manganese Oxide Catalysts for Formaldehyde Removal: Influence of the Cerium Incorporation. Studies in Surface Science and Catalysis, 175, 517-520. https://doi.org/10.1016/S0167-2991(10)75098-9
Hasegawa, Y., Fukumoto, K., Ishima, T., Yamamoto, H., Sano, M. and Miyake, T. (2009) Preparation of Copper-Containing Mesoporous Manganese Oxides and Their Catalytic Performance for CO Oxidation. Applied Catalysis B: Environmental, 89, 420-424. https://doi.org/10.1016/j.apcatb.2008.12.023
Sinha, A.K., Suzuki, K., Takahara, M., Azuma, H., Nonaka, T. and Suzuki, N. (2008) Preparation and Characterization of Mesostructured γ-Manganese Oxide and Its Application to VOCs Elimination. The Journal of Physical Chemistry C, 112, 16028-16035. https://doi.org/10.1021/jp805211z
Hong, X., Zhang, G., Zhu, Y. and Yang, H. (2003) Sol-Gel Synthesis and Characterization of Mesoporous Manganese Oxide. Materials Research Bulletin, 38, 1695-1703. https://doi.org/10.1016/j.materresbull.2003.07.005
Kragten, J. (1978) Atlas of Metal-Ligand Equilibria in Aqueous Solution. Ellis Horwood Limited, Chichester, 534.
Cheng, J., Zou, X., Meng, X., Yang, G., Lu, X., Wei, C., Sun, Z., Feng, H. and Yang, Y. (2010) Lead Hydroxide Nanowires Obtained from Lead Nitrate Solution by Adding Chloride Ions. Advanced Materials Research, 123-125, 719-722. https://doi.org/10.4028/www.scientific.net/AMR.123-125.719
Bargar, J.R., Towle, S.N., Brown Jr., G.E. and Parks, G.A. (1996) Outer-Sphere Pb(II) Adsorbed at Specific Surface Sites on Single Crystal α-Alumina. Geochimica et Cosmochimica Acta, 60, 3541-3547. https://doi.org/10.1016/0016-7037(96)00222-0
Bargar, J.R., Towle, S.N., Brown Jr., G.E. and Parks, G.A. (1997) XAFS and Bond-Valence Determination of the Structures and Compositions of Surface Functional Groups and Pb(II) and Co(II) Sorption Products on Single-Crystal α-Alumina. Journal of Colloid and Interface Science, 185, 473-492. https://doi.org/10.1006/jcis.1996.4574
Trivedi, P. and Axe, L. (2001) Predicting Divalent Metal Sorption to Hydrous Al, Fe, and Mn Oxides. Environmental Science & Technology, 35, 1779-1784. https://doi.org/10.1021/es001644+