Ultra-Net Emission and Solid Waste Transfer of Air Pollutants in Steel, Power and Cement Industries —The Idea of Construction and Key Technology of Denitration Engineering Transformation and By-Product Formation — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Ultra-Net Emission and Solid Waste Transfer of Air Pollutants in Steel, Power and Cement Industries —The Idea of Construction and Key Technology of Denitration Engineering Transformation and By-Product Formation
Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
,
Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
,
Department of Civil Engineering, Tongling University, Tongling, China
,
Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
,
Department of Civil Engineering, Manitoba University, Winnipeg, Canada
1 Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
2 Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
3 Department of Civil Engineering, Tongling University, Tongling, China
4 Institute of Molecular Engineering and Applied Chemistry, Anhui University of Technology, Ma’anshan, China
5 Department of Civil Engineering, Manitoba University, Winnipeg, Canada
In this paper, an integrated desulfurization and denitrification technology is proposed for ultra-low emissions of SO 2 and NO x in the steel, power and cement industries. A cost-effective and operationally efficient control strategy is realized through a forced oxidation-absorption-reduction process, which reduces equipment investment and operating costs. The technology was adapted to continuous and intermittent denitrification in different temperature zones, promoting the recycling of desulfurization and denitrification products. The study also explored the use of a highly active absorbent obtained by the hydration reaction of coal ash and lime from a power company for the desulfurization and denitrification of sintered flue gases in iron and steel mills, which produces by-products that can be used as retarding agents in the cement industry, resulting in a circular economy. The article emphasizes the importance of improving the lime digestion process and developing new denitrification agents for environmentally safe and cost-effective flue gas treatment.
KeywordsAir PollutionDenitration EngineeringUltra-Net EmissionsSolid Waste Transfer
Li, Q., Hou, Y., Han, X., Wang, J., Liu, Y., Xiang, N., et al . (2020) Promotional Effect of Cyclic Desulfurization and Regeneration for Selective Catalytic Reduction of NO by NH 3 over Activated Carbon. Journal of Cleaner Production , 249, Article ID: 119392. https://doi.org/10.1016/j.jclepro.2019.119392
Chen, K., Huang, Y., Wang, S., Zhu, Z., Cheng, H. and Yuan, Q. (2023) Integrated Technology for Dust Removal and Denitration of High-Temperature Flue Gas in Coal-Fired Power Plants. Fuel , 342, Article ID: 127687. https://doi.org/10.1016/j.fuel.2023.127687
Song, J., Sun, X., Zhang, G., Cheng, S., Xu, Y. and Jiang, Y. (2024) Recent Advances in Improving SO 2 Resistance of Ce-Based Catalysts for NH 3 -SCR: Mechanisms and Strategies. Molecular Catalysis , 564, Article ID: 114347. https://doi.org/10.1016/j.mcat.2024.114347
Jiang, D., Wang, Y., Zhou, Y., Li, Z., Li, S., Zhang, S., et al . (2023) Performance of Sintering Dust-Modified Metal Oxides Catalyst in SCR-NH 3 Technique. Research on Chemical Intermediates , 49, 2299-2319. https://doi.org/10.1007/s11164-023-04995-8
Wang, D., Huang, B., Shi, Z., Long, H., Li, L., Yang, Z., et al . (2021) Influence of Cerium Doping on Cu-Ni/activated Carbon Low-Temperature CO-SCR Denitration Catalysts. RSC Advances , 11, 18458-18467. https://doi.org/10.1039/d1ra02352g
Li, Y., Lin, Y., Wang, B., Ding, S., Qi, F. and Zhu, T. (2019) Carbon Consumption of Activated Coke in the Thermal Regeneration Process for Flue Gas Desulfurization and Denitrification. Journal of Cleaner Production , 228, 1391-1400. https://doi.org/10.1016/j.jclepro.2019.04.225
Liu, F., Lei, Y., Shi, J., Zhou, L., Wu, Z., Dong, Y., et al . (2020) Effect of Microbial Nutrients Supply on Coal Bio-Desulfurization. Journal of Hazardous Materials , 384, 121324-12333. https://doi.org/10.1016/j.jhazmat.2019.121324
Wang, H., Huang, B., Yu, C., Lu, M., Huang, H. and Zhou, Y. (2019) Research Progress, Challenges and Perspectives on the Sulfur and Water Resistance of Catalysts for Low Temperature Selective Catalytic Reduction of Nox by NH 3 . Applied Catalysis A : General , 588, Article ID: 117207. https://doi.org/10.1016/j.apcata.2019.117207
Zhou, Y., Wang, J., Wei, X., Ren, S., Yang, X., Beiyuan, J., et al . (2021) Escalating Health Risk of Thallium and Arsenic from Farmland Contamination Fueled by Cement-Making Activities: A Hidden but Significant Source. Science of the Total Environment , 782, Article ID: 146603. https://doi.org/10.1016/j.scitotenv.2021.146603
Lahaye, D., Abbassi, M.e., Vuik, K., Talice, M. and Juretić, F. (2020) Mitigating Thermal Nox by Changing the Secondary Air Injection Channel: A Case Study in the Cement Industry. Fluids , 5, 220-233. https://doi.org/10.3390/fluids5040220
Benhelal, E., Shamsaei, E. and Rashid, M.I. (2021) Challenges against CO 2 Abatement Strategies in Cement Industry: A Review. Journal of Environmental Sciences , 104, 84-101. https://doi.org/10.1016/j.jes.2020.11.020
Yang, Y., Zhang, Y., Li, S., Liu, R. and Duan, E. (2020) Numerical Simulation of Low Nitrogen Oxides Emissions through Cement Precalciner Structure and Parameter Optimization. Chemosphere , 258, Article ID: 127420. https://doi.org/10.1016/j.chemosphere.2020.127420
Liu, B., Peng, D., Chiang, P. and Chu, C. (2023) Performance Evaluation of NO x Absorption by Different Denitration Absorbents in Wet Flue Gas Denitration. Journal of the Taiwan Institute of Chemical Engineers , 145, Article ID: 104840. https://doi.org/10.1016/j.jtice.2023.104840
Peruski, K.M., Parker, C.J. and Cary, S.K. (2023) Analysis of Neptunium Oxides Produced through Modified Direct Denitration. Journal of Nuclear Materials , 587, Article ID: 154704. https://doi.org/10.1016/j.jnucmat.2023.154704
Huang, B., Shi, Z., Yang, Z., Dai, M., Wen, Z., Li, W., et al . (2022) Mechanism of CO Selective Catalytic Reduction Denitration on Fe-Mn/Ac Catalysts at Medium and Low Temperatures under Oxygen Atmosphere. Chemical Engineering Journal , 446, Article ID: 137412. https://doi.org/10.1016/j.cej.2022.137412
Wu, X., Yu, X., Xu, R., Cao, M. and Sun, K. (2022) Nonlinear Dynamic Soft-Sensing Modeling of Nox Emission of a Selective Catalytic Reduction Denitration System. IEEE Transactions on Instrumentation and Measurement , 71, Article ID: 2504911. https://doi.org/10.1109/tim.2022.3141154
Wang, Y., Zhang, J., Qian, G. and Zhang, T. (2023) Data-Driven Discovery of Low Temperature Denitration Catalysts with Strong Anti-Sulfur and Anti-Water Property. Materials Letters , 342, Article ID: 134315. https://doi.org/10.1016/j.matlet.2023.134315
Wang, B., Song, K., Li, Z., Li, K. and Shi, J. (2022) One-Pot Synthesis of Rare Earth Modified Cu/Sapo-34 for Enhanced Selective Catalytic Reduction Denitration Performance. Separation and Purification Technology , 303, Article ID: 122281. https://doi.org/10.1016/j.seppur.2022.122281
Zhang, Y., Wang, Z., He, Y., Zhu, Y. and Liu, J. (2023) Experimental Study on Three Additives Used for the Removal of Nitrite, a Byproduct of Ozone Oxidation Denitration Technology. Environmental Technology & Innovation , 32, Article ID: 103236. https://doi.org/10.1016/j.eti.2023.103236
Chen, Y., He, H., Wu, S., Ning, X., Chen, F., Lv, Y., et al . (2020) Mn/Ce Oxides Decorated Polyphenylene Sulfide Needle-Punching Fibrous Felts for Dust Removal and Denitration Application. Polymers , 12, 168-180. https://doi.org/10.3390/polym12010168