Electrical and Electronic Waste in Northwest Mexico
- 1 Engineering Institute, Autonomous University of Baja California, Mexicali, Mexico
- 2 Faculty of Engineering, Autonomous Univer- sity of Baja California, Mexicali, Mexico
- 3 University of Sonora, Hermosillo, Mexico
- 4 Engineering Institute, Autonomous University of Baja California, Mexicali, Mexico
- 5 Engineering Institute, Autonomous University of Baja California, Mexicali, Mexico
- 6 Engineering Institute, Autonomous University of Baja California, Mexicali, Mexico
- 7 University of Applied Sciences Zittau/Gorlitz, Zittau, Germany
Abstract
The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the acquisition of second hand equipment. Therefore it is necessary to implement strategies for the sustainable management of electrical and electronic equipment at the end of its useful life. This paper presents the results of an investigation that was conducted in a city located in the Northwest of Mexico, which seeks to understand the management practices of household WEEE generators. A survey was applied to a representative sample of the population with a confidence level of 90%. Six home appliances were quantified and it was found that approximately 21% of them are disposed directly as part of the household flow of Municipal Solid Waste (MSW), while 79% are storage for a latter sale, repair or reuse. The re sults obtained support the need to develop evaluations and to implement possible scenarios for the sustainable manage ment of Electrical and Electronic Waste.
- D. Sinha-Khetriwal, P. Kraeuchi and M. Schwaninger, “A Comparison of Electronic Waste Recycling in Switzerland and in India,” Environmental Impact Assessment Review, Vol. 25, No. 5, 2005, pp. 492-504.
- R. Widmer, H. Oswald-Krapf, D. Sinha-Khetriwal, M. Schnellmann and H. Boni, “Global Perspectives on E-Waste,” Environmental Impact Assessment Review, Vol. 25, No. 5, 2005, pp. 436-458. doi:10.1016/j.eiar.2005.04.001
- S. Schwarzer, A. De Ono, P. Peduzzi, G. Giuliani and S. Kluser, “E-Waste, the Hidden Side of IT Equipment’s Manufacturing and Use,” 2005. http://ewasteguide.info/biblio/e-waste-the-h
- “Electronic Components Industry Profile: Global 2012,” Business Source Complete, 2013, pp. 1-34.
- Proméxico, “Investment and Trade. Industry Profiles. Sector Profile: Electric-Electronic in Mexico,” 2011. http://mim.promexico.gob.mx
- Z. Wei-Hua, W. Ying-Xin and M. O. Simonnot, “Soil Contamination Due to E-Waste Disposal and Recycling Activities: A Review with Special Focus on China,” Pedosphere, Vol. 22, No. 4, 2012, pp. 434-455. doi:10.1016/S1002-0160(12)60030-7
- D. S. Khetriwal, P. Kraeuchi and R. Widmer, “Producer Responsibility for E-Waste Management: Key Issues for Consideration—Learning from the Swiss Experience, Journal of Environment Management, Vol. 90, No. 1, 2009, pp. 153-165. doi:10.1016/j.jenvman.2007.08.019
- A. Bandyopadhyay, “Indian Initiatives on E-Waste Management—A Critical Review,” Environmental Engineering Science, Vol. 25, No. 10. 2008, pp. 1507-1526. doi:10.1089/ees.2007.0342
- R. J. Slack, J. R. Gronow and N. Voulvoulis, “Hazardous Components of Household Waste, Critical Reviews,” Environmental Science and Technology, Vol. 34, No. 5, 2004 pp. 419-445 doi:10.1080/10643380490443272
- Secretary of Environmental and Natural Resources (SEMARNAT), “National Programme for the Prevention and Management of Waste 2009-2012,” http://relascmex.files.wordpress.com/2009/11/programanalresiduos2009-2012-oct2009.pdf
- K. Huang, J. Guo and X. Zhenming, “Recycling of Waste Printed Circuit Boards: A Review of Current Technologies and Treatment Status in China,” Journal of Hazardous Materials, Vol. 164, No. 2-3, 2009, pp. 399-408. doi:10.1016/j.jhazmat.2008.08.051
- Promexico, “Investment and Trade. Appliances Report,” 2012. http://mim.promexico.gob.mx
- Promexico, “Business Intelligence Unit,” 2012. http://mim.promexico.gob.mx/wb/mim/inicio