Infiltration of Mould from Crawl Space under the Prefabricated Bathroom
- 1 Department of Life Style and Space Design, Miyagigakuin Women’s University, Sendai, Japan
- 2 National Institute of Public Health, Wakou, Japan
- 3 Akita Prefectural University al Institute, Yurihonjo, Japan
- 4 Iwate Prefectural University al Institute, Morioka, Japan
- 5 Matsue College of Technology, Matsue, Japan
Abstract
The indoor mould concentration depends not only on the outdoor mould source but also on the indoor mould source. The mould source is not only on the interior surface but also in the concealed spaces: a crawl space, a beam space, a wall cavity etc. Most detached houses in Japan have crawl spaces under the first floor. The humidity is high from spring to autumn in crawl spaces. Therefore the concentration of mould spore is very high in most crawl spaces. Prefabricated bathrooms called “bath-units” are installed in most Japanese houses. The authors showed in the previous studies that there are infiltration routes between bath-units and walls that the routes may lead chemical compounds from crawl space to indoor space. In this study, the influence of mould infiltration from crawl space upon indoor mould concentration is investigated using a test house which consists of a lavatory and a bathroom. The structure of the house is wooden post-and-beam. The house is airtight and insulated according to the latest building code for save energy. The mould concentrations were measured in the crawl space and the indoor spaces continuously using a mould multi-sampling system with a pump, valves and impingers. Before the measurements, the indoor mould concentration was made low using an air cleaner. The air flow rates were measured using tracer gases. After the exhaust fan was switched on, the mould concentration increased. The number of infiltrated mould was calculated using air flow rates and mould concentrations. The results showed that mould infiltration ratio may be one of the important indicators of indoor air quality.
- Airaksinen, M., Pasanen, P., Kurnitski, J. and Seppanen, O. (2004) Microbial Contamination of Indoor Air Due to Leakages from Crawl Space: A Field Study. Indoor Air, 14, 55-64. http://dx.doi.org/10.1046/j.1600-0668.2003.00210.x
- Airaksinen, M., Kurnitski, J., Pasanen, P. and Seppanen, O. (2004) Fungal Spore Transport through a Building Structure. Indoor Air, 14, 92-104. http://dx.doi.org/10.1046/j.1600-0668.2003.00215.x
- Fazio, P., Bartlett, K., Yang, D.-Q., Rao, J.W. and Miao, G. (2005) Development of Experimental Procedure to Evaluate Potential Movement of Mould Spores from Wall Cavity to Indoor Environment. 10th Canadian Conference on Building Science and Technology, Ottawa, May 2005, 215-224.
- Hayashi, M., Osawa, H., Honma, Y. and Matsui, M. (2007) Prediction of Air Quality Considering the Concealed Air Leaks of Houses. Proceedings: Building Simulation 2007, 870-877. http://www.ibpsa.org/proceedings/BS2007/p208_final.pdf
- Hayashi, M. and Osawa, H. (2008) The Influence of the Concealed Pollution Sources upon the Indoor Air Quality in Houses. Building and Environment, 43, 329-336. http://dx.doi.org/10.1016/j.buildenv.2006.03.022
- Reponen, T., Willeke, K., Ulevicius, V., Reponen, A. and Grinshpun, S.A. (1996) Effect of Relative Humidity on the Aerodynamic Diameter and Respiratory Deposition of Fungal Spores. Atmospheric Environment, 30, 3967-3974. http://dx.doi.org/10.1016/1352-2310(96)00128-8
- Honma, Y., Enai, M., Fukushima, A. and Suzuki, H. (2002) The Influence of Airflow through Leakage around Floor on the Hygrothermal Conditions in a Crawl Space. The 6th Symposium on Building Physics in the Nordic Countries, Trondheim, 17-19 June 2002, 183-190.
- Yamada, H., Hayashi, M., Osawa, H., Hasegawa, K. and Honma, Y. (2013) Experiments on a Method to Measure Mold Concentration in a Wall Cavity Using a Teflon Tube. CLIMA2013, Article ID: 711.
- Hayashi, M. and Osawa, H. (2009) Influence of the Concealed Air Leaks upon the Indoor Air Quality in Houses with Prefabricated Bathroom. Proceeding of Room Vent 2009, 505-512.