On the basis of homogeneous liquid-liquid extraction (HoLLE) with Zonyl FSA to plating water containing 1 mg palladium, 96.6% of the palladium was extracted into the sedimented liquid phase. After phase separation, the volume ratio (Va/Vs) of the aqueous phase (Va) and the sedimented liquid phase (Vs) was 556 (50 mL → 0.09 mL). The assessment of the potential implementation of this procedure to wastewater treatment showed that HoLLE was satisfactorily achieved when the volume was scaled up to 1000 mL. Moreover, HoLLE was conducted to real palladium plating wastewater generated in the plating industry. 94.5% of the palladium was extracted into the sedimented liquid phase. After phase separation, the volume ratio (Va/Vs) of the aqueous phase (Va) and the sedimented liquid phase (Vs) was 500 (50 mL → 0.1 mL). In addition, HoLLE could separate palladium from coexisting metals in real plating wastewater. This knowledge is expected to lead to the development of new separation and concentration technologies of rare metals from real plating wastewater.
Kato, M., Senda, K., Musha, Y., Sasano, J., Okinaka, Y. and Osaka, T. (2007) Electrodeposition of Amorphous Gold Alloy Films. Electrochimica Acta, 53, 11-15. http://dx.doi.org/10.1016/j.electacta.2007.01.045
Rouya, E., Stafford, G.R., Bertocci, U., Mallett, J.J., Schad, R., Begley, M.R., Kelly, R.G., Reed, M.L. and Zangari, G. (2010) Electrodeposition of Metastable Au-Ni alloys. Journal of the Electrochemical Society, 157, D396-D405. http://dx.doi.org/10.1149/1.3421749
Beattie, R.W. (1962) Palladium Plating on Telephone Plugs and Sockets. Platinum Metals Review, 6, 52-56.
Kim, Y.M., Park, J. and Kim, Y. (2012) Effect of Pd Thickness on the Interfacial Reaction and Shear Strength in Solder Joints between Sn-3.0Ag-0.5Cu Solder and Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Surface Finish. Journal of Electronic Materials, 41, 763-773. http://dx.doi.org/10.1007/s11664-012-1921-0
Zuo, Y., Tang, J., Fan, C., Tang, Y. and Xiong, J. (2008) An Electroless Plating Film of Palladium on 304 Stainless Steel and Its Excellent Corrosion Resistance. Thin Solid Films, 516, 7565-7570. http://dx.doi.org/10.1016/j.tsf.2008.04.049
Galvan-Arellano, M., Diaz-Reyes, J. and Pena-Sierra, R. (2010) Ohmic Contacts with Palladium Diffusion Barrier on III-V Semiconductors. Vacuum, 84, 1195-1198. http://dx.doi.org/10.1016/j.vacuum.2009.10.024
Ministry of Economy, Trade and Industry (Japan) (2005) A Study of the Model Circulation System in Recycling of Plating Sludge. (In Japanese)
Aktas, S. (2011) Rhodium Recovery from Rhodium-Containing Waste Rinsing Water via Cementation Using Zinc Powder. Hydrometallurgy, 106, 71-75. http://dx.doi.org/10.1016/j.hydromet.2010.12.005
Lee, H.Y. (2013) Separation and Recovery of Nickel from Spent Electroless Nickel-Plating Solutions with Hydrometallurgical Processes. Separation Science and Technology, 48, 1602-1608. http://dx.doi.org/10.1080/01496395.2012.756523
Hermandez-Tapia, J.R., Vazquez-Arenas, J. and Gonzalez, I. (2013) A Kinetic Model to Describe the Nickel Electro-Recovery from Industrial Plating Effluents under Variable Electrolyte Conductivity. Electrochimica Acta, 103, 266-274. http://dx.doi.org/10.1016/j.electacta.2013.04.122
Hankin, A. and Kelsall, G.H. (2012) Electrochemical Recovery of Nickel from Nickel Sulfamate Plating Effluents. Journal of Applied Electrochemistry, 42, 629-643. http://dx.doi.org/10.1007/s10800-012-0447-8
Dutra, A.J.B., Rocha, G.P. and Pombo, F.R. (2008) Copper Recovery and Cyanide Oxidation by Electrowinning from a Spent Copper-Cyanide Electroplating Electrolyte. Journal of Hazardous Materials, 152, 648-655. http://dx.doi.org/10.1016/j.jhazmat.2007.07.030
Jin, G., Wang, X., Fu, Y. and Do, Y. (2012) Preparation of Tetraoxalyl Ethylenediamine Metamine Resin Grafted-Carbon Fibers for Nano-Nickel Recovery from Spent Electroless Nickel Plating Baths. Chemical Engineering Journal, 203, 440-446. http://dx.doi.org/10.1016/j.cej.2012.07.055
Rahman, I.M.M., Furusho, Y., Begum, Z.A., Izatt, N., Brucning, R., Sabarudin, A. and Hasegawa, H. (2011) Separation of Lead from High Matrix Electroless Nickel Plating Waste Solution Using an Ion-Selective Immobilized Macrocycle System. Microchemical Journal, 98, 103-108. http://dx.doi.org/10.1016/j.microc.2010.12.005
Ookubo, T., Nishihama, S. and Yoshizuka, K. (2013) Separation and Recovery of Nickel from Waste Electroless Nickel-Phosphorous Plating Solution. Solvent Extraction Research and Development, Japan, 20, 149-157. http://dx.doi.org/10.15261/serdj.20.149
Li, L.Q. and Zhong, H. (2012) Separation and Recovery of Copper(II), Nickel(II) from Simulated Plating Wastewater by Solvent Extraction Using Lix984. Advanced Materials Research, 365, 252-259. http://dx.doi.org/10.4028/www.scientific.net/AMR.365.252
Okada, M., Kimura, S., Murayama, N., Shibata, J. and Otani, K. (2010) Application of Solvent Extraction Using Synergistic Effect to Electroless Nickel Plating Waste Liquor. Resources Processing, 57, 109-113. http://dx.doi.org/10.4144/rpsj.57.109
Warner, N. and Free, M.L. (2009) The Electrochemical Recovery of Metallic Palladium from Spent Electroless Plating Solution. JOM, 61, 27-30. http://dx.doi.org/10.1007/s11837-009-0148-x
Farrar, L.S. (1987) Recovery of Palladium from Plating Operations. Plating and Surface Finishing, 3, 60-61.
Ochromowicz, K. and Chmielewski, T. (2011) Solvent Extraction in Hydrometallurgical Processing of Polish Copper Concentrates. Physicochemical Problems of Mineral Processing, 46, 207-218.
Flett, D.S. (2005) Solvent Extraction in Hydrometallurgy: The Role of Organophosphorus Extractants. Journal of Organometallic Chemistry, 690, 2426-2438. http://dx.doi.org/10.1016/j.jorganchem.2004.11.037
Silva, J.E., Paiva, A.P., Soares, D., Labrincha, A. and Castro, F. (2005) Solvent Extraction Applied to the Recovery of Heavy Metals from Galvanic Sludge. Journal of Hazardous Materials, B120, 113-118. http://dx.doi.org/10.1016/j.jhazmat.2004.12.008
Igarashi, S. and Yotsuyanagi, T. (1992) Homogeneous Liquid-Liquid Extraction by pH Dependent Phase Separation with a Fluorocarbon Ionic Surfactant and Its Application to the Preconcentration of Porphyrin Compounds. Mikrochimica Acta, 106, 37-44. http://dx.doi.org/10.1007/BF01242697
Takagai, Y. and Igarashi, S. (2002) Homogeneous Liquid-Liquid Extraction and Micellar Electrokinetic Chromatography Using Sweeping Effect Concentration System for Determination of Trace Amounts of Several Polycyclic Aromatic Hydrocarbons. Analytical and Bioanalytical Chemistry, 373, 87-92. http://dx.doi.org/10.1007/s00216-002-1243-9
Fuchimukai, J., Yamaguchi, H., Meguro, Y., Kubota, T. and Igarashi, S. (2006) Highly Efficient Homogeneous Liquid-Liquid Extraction of Lanthanoid Ions in a Strong Acidic Solution. Solvent Extraction Research and Development, Japan, 13, 139-146.
Yamaguchi, H., Itoh, S., Igarashi, S. and Kobayashi, T. (2005) Homogeneous Liquid-Liquid Extraction of Metal-1,10-Phenanthroline Chelates in a Weak Acidic Solution. Bunseki Kagaku, 54, 227-230. (In Japanese) http://dx.doi.org/10.2116/bunsekikagaku.54.227
Kato, T., Igarashi, S., Ishiwatari, Y., Furukawa, M. and Yamaguchi, H. (2013) Separation and Concentration of Indium from a Liquid Crystal Display via Homogeneous Liquid-Liquid Extraction. Hydrometallurgy, 137, 148-155. http://dx.doi.org/10.1016/j.hydromet.2013.06.004
Sudo, T. and Igarashi, S. (1996) Homogeneous Liquid-Liquid Extraction Method for Spectrofluorimetric Determination of Chlorophyll A. Talanta, 43, 233-237. http://dx.doi.org/10.1016/0039-9140(95)01748-8
Inamoto, J. (2011) The Basic Wastewater Treatment and the Response to the New Wastewater Regulation. Journal of the Surface Finishing Society of Japan, 62, 535-540. (In Japanese) http://dx.doi.org/10.4139/sfj.62.535
Takagai, Y. and Igarashi, S. (2003) Selective Extraction and Isolation of Vitamin B12 Using Homogeneous Liquid-Liquid Extraction with Perfluoro Surfactant. Bulletin of Chemical Society of Japan, 76, 1595-1600. http://dx.doi.org/10.1246/bcsj.76.1595
Butsugan, M. and Igarashi, S. (2009) Collection and Recovery Agent for Surfactant. Japanese Patent No. 207994. (In Japanese)
Japanese Standard Association (2011) Testing Methods for Perfluorooctane Sulfonate (PFOS) and Perfluorooctanoate (PFOA) in Industrial Water and Wastewater (JIS K 0450-70-10). (In Japanese)