Turbidimetric Determination of Hydrocarbon Contamination in Passaic River Sediments and Refinery Polluted Soils
- 1
Abstract
A rapid method is described for the determination of petroleum hydrocarbons in soil samples. The method is based on the extraction of hydrocarbons by a solvent and the treatment of the solution with an aqueous solution of a surfactant to release the hydrocarbons to the water phase in the form of a stable emulsion. The emulsion is then utilized to measure the hydrocarbon content by turbidimetry. The effects of various operating parameters including the surfactant solution composition and time of extraction and time of mixing with the releasing solution are investigated. The stability of the emulsion was improved in acid environment containing and electrolyte. The turbidity values (T) were related with hydrocarbon concentration in the extract (C) by the following equation. Turbidity = 2.75 C + 205.7. With R<sup>2<suip> = 0.9929. The soil hydrocarbon content (SHC) measured in µg/g can then be calculated using the formula: SHC = [Extract Vol. (mL) x C]/Sample Wt (g). The results correlated well with the results of total hydrocarbons in soils determined by standard methods. The method was applied for the estimation of hydrocarbons in Passaic river sediments taken from various locations and depths. For field work the method was used to supply data on the hydrocarbon contamination of soil samples taken within an oil refinery and a monitoring well drilled within heavy hydrocarbon waste dumping location.
- L. C. Osuji and I. Nwoye, “An Appraisal of the impact of Petroleum Hydrocarbons on Soil Fertility: The Owaza Experience,” African Journal of Agricultural Research, Vol. 2, 2007, pp. 318-324.
- S. Kh. Chaerun, K. Tazaki, R. Asada and K. Kogure, “Interaction between Clay Minerals and Hydrocarbon-Utilizing Indigenous Microorganisms in High Concentrations of Heavy Oil: Implications for Bioremediation,” Clay Minerals, Vol. 40, No. 1, 2005, pp. 105-114. doi:10.1180/0009855054010159
- R. Sadle and D. Des Connell, “Determination of Total Petroleum Hydrocarbons in Soil,” Proceedings of the Fifth National Workshop on the Assessment of Site Contamination, Adelaide, 2003, pp. 133-155.
- M. S. Patel, “Rapid and Convenient Laboratory Method for Extraction and Subsequent Spectrophotometric Determination of Bitumen Content of Bituminous Sands,” Analytical Chemistry, Vol. 46, No. 6, 1974, pp. 794-795. doi:10.1021/ac60342a021
- X. Zhang, “A Method for the Determination of Crude Petroleum Oil in Soil Using Tetrahydrofuran- Turbidimetric Method,” Huan Jing Ke Xue Journal Abstract, Vol. 9, No. 4, 1988, pp. 57-58.
- S. Kulichenko and G. Shevchenko, “Triton X-100-Stabilized “Oil-in-Water” Emulsions as Suitable Media for Alkalimetric Determination of Hydrophobic Organic Acids,” Analytical and Bioanalytical Chemistry, Vol. 375, No. 2, 2003, pp. 255-258. doi:10.1007/s00216-002-1647-6
- S. Pastewski, E. Hallmann, and K. Medrzycka, “Physicochemical Aspects of the Application of Surfactants and Biosurfactants in Soil Remediation,” Environmental Engineering Science, Vol. 23, No. 4, pp. 579-588.
- M. M. Barbooti, A. S. Hamadi, A. Abdul-Razzaq and J. Hussain, “Environmental Site Assessment of Al-Daura Refinery—Evaluation of Soil Pollution with Petroleum Products,” Engineering & Technology, Vol. 28, 2010, pp. 6016-6028.
- T. D. Borrowman, E. R. Smith, J. Z. Gailani and L. Caviness, “Erodibility Study of Passaic River Sediments Using USACE Sedflume, Engineer Research and Development Center,” US Army Engineer Research and Development Center, Vicksburg, 2006.
- N. M. Bujalski and M. A. Kruge, “Characterization of Contaminant and Biomass-Derived Organic Matter in Sediments from the Lower Passaic River, New Jersey, USA”, 2010. http://pages.csam.montclair.edu/pri/symposium2010/kruge_PRS2010.pdf
- Oil Industry Environmental Working Group, “Sampling Protocols and Analytical Methods for Determining Petroleum Products in Soil and Water,” Wellington, 1999.