This study modeled the relationship between Sludge Filtration Resistance (SFR) and Capillary Suction Time (CST) using the data generated from different concentrations of CaCl 2 for SFR and CST empirically using the Equation proposed by Christensen et al. (1993). The main purpose of conducting CST and SRF tests at wastewater treatment plants is to save operating costs by evaluating the optimal dose of the sludge conditioner, known as the dose of coagulant that yields the minimal capillary suction time or resistance to filtration. In order to establish a relationship between the SFR with CST, there is a relatively good correlation between CST and SFR. The results showed that the values of CST decreased with increasing CaCl 2 concentration, and a good dewaterability could be obtained at the CaCl 2 dosage of 18 g with the corresponding CST of 5.52 s for 20 mm internal cylinder and 30.84 s for 14.5 mm internal cylinder. The results of SFR tests shown decreased with an increase in CaCl 2 dosage. The optimal CaCl 2 dosage was 18 g and the corresponding SFR was 2.65 × 10 8 N·s/m5. The results of this study for CST recommend larger diameter cylinder to be used to test heavy sludge because the larger cylinder significantly reduces the variability and the time taken to conduct the CST tests.
Scholz, M. (2005) Review of Recent Trends in Capillary Suction Time CST Dewaterability Testing Research. Industrial and Engineering Chemistry Research, 44, 8157-8163. https://doi.org/10.1021/ie058011u
Bürger, R., Concha, F. and Karlsen, K.H. (2001) Phenomenological Model of Filtration Processes: 1. Cake Formation and Expression. Chemical Engineering Science, 56, 4537-4553. https://doi.org/10.1016/S0009-2509(01)00115-4
Mowla, D., Tran, H.N. and Allen, D.G. (2013) A Review of the Properties of Biosludge and Its Relevance to Enhanced Dewatering Processes. Biomass and Bioenergy, 58, 365-378. https://doi.org/10.1016/j.biombioe.2013.09.002
Gale, R.S. and Baskerville, R.C. (1967) Capillary Suction Method for Determination of the Filtration Properties of a Solid/Liquid Suspension. Chemistry and Industry, 9, 355-356.
Yukseler, H., Tosun, I. and Yetis, U. (2007) A New Approach in Assessing Slurry Filterability. Journal of Membrane Science, 303, 72-79. https://doi.org/10.1016/j.memsci.2007.06.053
Guan, J., Amal, R. and Waite, T.D. (2003) Effect of Floc Size and Structure on Biosolid Capillary Suction Time. Water Science and Technology: A Journal of the International Association on Water Pollution Research, 47, 255-260.
Sawalha, O, and Scholz, M. (2007) Assessment of Capillary Suction Time (CST) Test Methodologies. Environmental Technology, 28, 1377-1386. https://doi.org/10.1080/09593332808618898
Bockstal, F., Fourarge, J.H. and Rahier, G. (1985) Constant Pressure Cake Filtration with Simultaneous Sedimentation. Filtration and Separation, 22, 255.
Christiansen, G.L. and Dick, R.I. (1985) Specific Resistance Measurements: Non Parabolic Data. Journal of Environmental Engineering, 111, 243-257. https://doi.org/10.1061/(ASCE)0733-9372(1985)111:3(243)
Leu, W.F. (1981) Cake Filtration. Ph.D. Dissertation, University of Houston, Houston, Texas.
Lai, C.K., Chen, G. and Lo, M.C. (2004) Salinity Effect on Freeze/Thaw Conditioning of Activated Sludge with and without Chemical Addition. Separation and Purification Technology, 34, 155-164. https://doi.org/10.1016/S1383-5866(03)00189-8
Ryan, T.P. (2007) Modern Engineering Statistics. Wiley-Interscience, Hoboken.
Meeten, G.H. and Smeulders, J.B.A.F. (1995) Interpretation of Filterability Measured by the Capillary Suction Time Method. Chemical Engineering Science, 50, 1273-1279. https://doi.org/10.1016/0009-2509(95)98840-B
Sawalha, O. (2010) CST: Developments in Testing Methodology and Reliability of Results. PhD Thesis.
Saveyn, H. (2005) Modelling and Optimization of Sludge Conditioning and Electric Field Assisted Dewatering. PhD Thesis.
Dereli, R.K., Grelot, A., Heffernan, B., van der Zee, F.P. and van Lier, J.B. (2014) Implications of Changes in Solids Retention Time on Long Term Evolution of Sludge Filterability in Anaerobic Membrane Bioreactors Treating High Strength Industrial Wastewater. Water Research, 59, 11-22. https://doi.org/10.1016/j.watres.2014.03.073
Dereli, R.K., Heffernan, B., Grelot, A., van der Zee, F.P. and van Lier, J.B. (2015) Influence of High Lipid Containing Wastewater on Filtration Performance and Fouling in An MBRs Operated at Different Sludge Retention Times. Separation and Purification Technology, 139, 43-52. https://doi.org/10.1016/j.seppur.2014.10.029
Lee, D.J. and Hsu, Y.H. (1994a) Use of Capillary Suction Apparatus for Estimating the Averaged Specific Resistance of Filtration Cake. Journal of Chemical Technology and Biotechnology, 59, 45-51. https://doi.org/10.1002/jctb.280590108
Herwijn, A.J., Heij, E.J.L., IJzermans, J.J., Coumans, W.J. and Kerkhof, P.J. (1995) Determination of Specific Cake Resistance with a New Capillary Suction Time Apparatus. Industrial and Engineering Chemistry Research, 34, 1310-1319. https://doi.org/10.1021/ie00043a036
Ayol, A. and Dentel, S.K. (2005) Enzymatic Treatment Effects on Dewaterability of an Aerobically Digested Biosolids: Laboratory Characterizations of Drain Ability and Filterability. Process Biochemistry, 40, 2435-2442. https://doi.org/10.1016/j.procbio.2004.09.024
Teoh, S.K., Tan, R.B.H. and Tien, C. (2006) A New Procedure for Determining Specific Filter Cake Resistance from Filtration Data. Chemical Engineering Science, 61, 4957-4965. https://doi.org/10.1016/j.ces.2006.03.048
Smollen, M. (1986) Dewaterability of Municipal Sludges 1: A Comparative Study of Specific Resistance to Filtration and Capillary Suction Time as Dewaterability Parameters. Water SA, 12, 277-132.
Smollen, M. (1986) Dewaterability of Municipal Sludges 2: Sludge Characterization and Behaviour in Terms of SRF and CST Parameters. Water SA, 12, 133-138.
Zhao, Y.Q., Papavasilopoulos, E.N., Bache, D.H. and Mackinnon, P.A. (2002) Polymer Conditioning of Alum Sludge and Discrepancies between Estimates of the Optimum Dosage. Water Science and Technology, 46, 115-121.
Emir, E.ü. (2002) The Role of Dewaterability Measures on the Liquid-Solid Separation of Biological Sludges: Compatibility as a New Measure of Sludge Dewaterability Bogazici University. Institute of Environmental Sciences, Filters and Filtration, 166 p.
Chia-Hung, H. and Kung-Cheh, L. (2003) Assessment of Sludge Dewaterability using Rheological Properties. Journal of the Chinese Institute of Engineers, 26, 221-226. https://doi.org/10.1080/02533839.2003.9670772
Christensen, J.R., Sorensen, P.B., Christensen, G.L. and Hansen, J.A. (1993) Mechanisms for Overdosing in Sludge Conditioning. Journal of Environmental Engineering, 119, 158-171. https://doi.org/10.1061/(ASCE)0733-9372(1993)119:1(159)
Ma, W., Zhao, Y.Q. and Kerney, P. (2007) A Study of Dual Polymer Conditioning of Aluminium Based Drinking Water Treatment Residual. Journal of Environmental Science and Heath, Part A, 42, 961-968. https://doi.org/10.1061/(ASCE)0733-9372(1993)119:1(159)
Peng, G., Ye, F. and Li, Y. (2011) Comparative Investigation of Parameters for Determining the Dewaterability of Activated Sludge. Water Environment Research, 83, 667-671.
Ademiluyi, J.O. and Onah, C. (2011) Study on Sludge Dewaterability using the Concept of Capillary Suction Time. Research Thesis Unpublished.