Orthorectification and Digital Elevation Model (DEM) Generation Using Cartosat-1 Satellite Stereo Pair in Himalayan Terrain
- 1
- 2
- 3
Abstract
High resolution data have high relief displacement in hilly terrains. Development of Digital Elevation model helps to assess bio resources more accurately in such terrains. While estimating bio resources in the Himalayan hilly terrain using multispectral LISS-III data of 23 m spatial resolution, the need for orthorectifcation of satellite data was necessary to correct for spatial distances due to high undulating slopes. Therefore, Cartosat stereo pair based Digital Elevation Model (DEM) was generated using the Rational Polynomial Coefficients (RPC) supplied along with the data products. By using the DEM orthorectification of LISS-III was created. In order to evaluate the positional accuracy of ortho rectified LISS-III Ground control points were selected using the Global Positioning System in differential GPS mode. As there is variation in the spatial distances and height over few points, the GCP corrected DEM was used for ortho rectifcation of Cartosat PAN and LISS-III data. This paper presents the procedure followed for ortho rectification and digital elevation model generation using Cartosat stereo pair data. The result of the study indicated high spatial resolution stereo images helped generation of three dimensional mountainous regions more accurately which helps in estimating the bio resources using multispectral LISS III data.
- P. K. Srivastava, K. Gopala, B. Srinivasan, T. P. Amitabh, S. Trivedi and R. Nandakumar, “Cartosat-1 Data Products for Topographic Mapping,” ISPRS Commission-IV International Symposium on Geospatial Databases for Sustainable Development, Vol. 37, 2006, pp. 1357-1362.
- R. Nandakumar, T. P. Srinivasan, K. B. Gopala and P. K. Srivastava, “Data Products for Cartosat-1,” ISG Newsletter, Vol. 11, No. 2-3, 2005, pp. 18-24.
- C. V. Tao and Y. Hu, “A Comprehensive Study of the Rational Function Model for Photogrammetric Processing,” Photogrammetric Engineering & Remote Sensing, Vol. 67, No. 12, 2001, pp. 1347-1357.
- K. Di, R. Ma and R. Li, “Rational Functions and Potential for Rigorous Sensor Model Recovery,” Photogrammetric Engineering & Remote Sensing, Vol. 69, No. 1, 2003, pp. 33-41.
- J. Poon, C. S. Fracer and C. Zhang, “Digital Surface Models from High Resolution Satellite Imagery,” Photogrammetric Engineering & Remote Sensing, Vol. 73, No. 11, 2007, pp. 1225-1232.
- A. Nadeem, M. Anjum, A. Ritesh, P. Jayaprasad, S. K. Pathan, Ajai, D. K. Singh and A. K. Singh, “Extraction and Validation of Cartosat-1 DEM,” Journal of the Indian Society of Remote Sensing, Vol. 35, No. 2, 2007, pp. 121-127.
- M. Crespi, F. Barbato, L. D. Vendictis, R. Onori, D. Polic, F. Volpe and X. Wang, “Orientation, Ortho-Rectification, DSM Extraction and 3D City Modeling by Cartosat-1 Stereo Imagery: First Results of a Test over Rome,” The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Goa, Vol. 36, 2006, pp. 1020-1025.
- C. S. Fracer and H. B. Hanley, “Bias Compensated RPCs for Sensor Orientation of High Resolution Satellite Imagery,” Photogrammetric Engineering & Remote Sensing, Vol. 71, No. 8, 2005, pp. 909-915.
- L. C. Chen, T. A. Teo and C. L. Liu, “The Geometrical Comparison of RSM and RFM for FORMOSAT-2 Satellite Images,” Photogrammetric Engineering & Remote Sensing, Vol. 72, No. 7, 2006, pp. 573-579.
- R. Dabrowski, M. Kedzierski, W. Fedorowicz, R. Kaczynski and J. Zych, “Geo-Interpretation Capabilities and Precision of an Ortho-Photomap Obtained from Cartosat Images,” The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Goa, Vol. 36, 2006, pp. 1038-1040.
- P. Michalis and I. Dowman, “Sensor model evaluation and DEM generation for Cartosat-1,” The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Goa, Vol. 36 Part IVB, 2006, pp. 1009-1013.