Tungsten copper and molybdenum copper composites, with weight percent copper in the range of 20% - 40%, have been produced using the spark plasma sintering (SPS) technique. Other specimens having similar compositions were also developed using the conventional techniques of Liquid Phase Sintering (LPS) and Infiltration. Electrical conductivity measurements showed that the specimens produced by the SPS process had substantially higher levels of electrical conductivity than those produced by the other methods. Relative density measurements showed that the SPS specimens achieved very high densification, with relative densities in the range of 99.1% - 100%. On the other hand, the specimens produced by LPS and infiltration had relative densities in the range of 88% - 92% and 96% - 98% respectively. The superior conductivity of the SPS specimens has been attributed to the virtually full densification achieved by the process. The effect of porosity on electrical conductivity has been discussed and three standard models were assessed using results from porous sintered skeletons of pure tungsten and pure molybdenum.
KeywordsSinteringInfiltrationConductivityPorositySpark PlasmaElectrical ContactRelative Density
Gusmano, G., Blanco, A, and Polini, R. (2001) Chemical Synthesis and Sintering Behavior of Highly Dispersed W-Cu Composite Powders. Journal of Materials Science, 36, 901-907. https://doi.org/10.1023/A:1004894900840
Johnson, J.I. and German, R.M. (1994) Chemically Activated Liquid Phase Sintering of Tungsten Copper. The International Journal of Powder Metallurgy, 30, 91-102.
Joo, S.-K., Lee, S.-W. and Ihn, T.-H. (1994) Effect of Cobalt Addition on the Liquid Phase Sintering of W-Cu Prepared by the Fluidized Bed Reduction Method. Metallurgical and Materials Transactions A, 25, 1575-1578. https://doi.org/10.1007/BF02668523
German, R.M. and Johnson, J.I. (1991) Effect of Processing Variables on the Properties of Liquid Phase Sintered Tungsten-Copper Composites. Advances in Powder Metallurgy, 1, 391-405.
Hasse, P. (1989) Selective Laser Sintering of Binary Metallic Powders. MS Thesis, University of Texas, Austin.
Lassner, E. and Schubert, W.D. (1999) Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds. Kluwer Academic/Plenum Publishers, NewYork. https://doi.org/10.1007/978-1-4615-4907-9
Hulbert, D.M., Anders, A., Andersson, J., Lavernia, E.J. and Mukherjee, A.K. (2009) A discussion on the absence of plasma in Spark Plasma Sintering. Scripta Materialia, 60, 835-838. https://doi.org/10.1016/j.scriptamat.2008.12.059
Sharma, N. (2019) Fundamentals of Spark Plasma Sintering (SPS): An Ideal Processing Technique. In: Cavaliere, P., Ed., Spark Plasma Sintering of Materials, Springer, Cham, 21-59. https://doi.org/10.1007/978-3-030-05327-7_2
Munir, Z.A., Anselmi-Tamburini, U. and Ohyanagi, M. (2006) The Effect of Electric Field and Pressure on the Synthesis and Consolidation of Materials: A Review of the Spark Plasma Sintering Method. Journal of Materials Science, 41, 763-777. https://doi.org/10.1007/s10853-006-6555-2
Biswas, K., He, J.Q., Blum, I.D., Wu, C.-I., Hogan, T.P., Seidman, D.N., Dravid, V.P. and Kanatzidis, M.G. (2012) High-Performance Bulk Thermoelectrics with All-Scale Hierarchical Architectures. Nature, 489, 414-418. https://doi.org/10.1038/nature11439
Yanagiya, S., Van Nong, N., Xu, J.X. and Pryds, N. (2010) The Effect of (Ag, Ni, Zn)-Addition on the Thermoelectric Properties of Copper Aluminate. Materials, 3, 318-328. https://doi.org/10.3390/ma3010318
Wang, S.F., Zhang, J., Luo, D.W., Gu, F., Tang, D.Y., Dong, Z.I., Tan, G.E.B., Que, W.X., Zhang, T.S., Li, S., et al. (2013) Transparent Ceramics: Processing, Materials, and Applications. Progress in Solid State Chemistry, 41, 20-54. https://doi.org/10.1016/j.progsolidstchem.2012.12.002
Kim, B.N., Hiraga, K., Morita, K. and Yoshida, H. (2007) Spark Plasma Sintering of Transparent Alumina. Scripta Materialia, 57, 607-610. https://doi.org/10.1016/j.scriptamat.2007.06.009
Deng, X., Wang, X., Wen, H., Kang. A., Gui, Z. and Li, L. (2006) Phase Transitions in Nanocrystalline Barium Titanate Ceramics Prepared by Spark Plasma Sintering. Journal of the American Ceramic Society, 89, 1059-1064. https://doi.org/10.1111/j.1551-2916.2005.00836.x
Alaniz, J.E., Perez-Gutierrez, F.G., Aguilar, G. and Garay, J.E. (2009) Optical Properties of Transparent Nanocrystalline Yttria Stabilized Zirconia. Optical Materials, 32, 62-68. https://doi.org/10.1016/j.optmat.2009.06.004
Li, J., Cui, B., Wang, H., Lin, Y., Deng, X., Li, M. and Nan, C. (2016) The Effects of Spark Plasma Sintering (SPS) on the Microstructure and Mechanical Properties of BaTiO3/3Y-TZP Composites. Materials, 9, 320. https://doi.org/10.3390/ma9050320
Madej, M. and Lezanski, J. (2005) Copper Infiltrated High Speed Steel Based Composites. Archives of Metallurgy and Materials, 50, 871-877.
Madej, M. (2010) The Tribological Properties of High Speed Steel Based Composites. Archives of Metallurgy and Materials, 55, 61-68.
Madej, M. (2012) Silver-Based Infiltrated Composites. Archives of Metallurgy and Materials, 57, 605-612. https://doi.org/10.2478/v10172-012-0064-x
Ghaderi, H.A., Arabi, H. and Rastegari, S. (2011) Reduction of Sintering Temperature of Porous Tungsten Skeleton used in Production of W-Cu Composites by Ultra-High Compaction Pressure of Tungsten Powder. Advanced Materials Research, 264-265, 807-812. https://doi.org/10.4028/www.scientific.net/AMR.264-265.807
Masakama, H., Tetsunume, K., Chen, Y.Q., Hiromu, K. and Mamoru, M. (2007) Influence of Porosity and Pore Size on Electrical Resistivity of Porous Aluminum Produced by Spacer Method. Materials Transactions, 48, 32-36.
El, K.H., Cordier, A., Batis, N., Siebert, E., Georges, S. and Steil, M.C. (2017) Effect of Porosity on the Electrical Conductivity of LAMOX Materials. Solid State Ionics, 304, 75-84. https://doi.org/10.1016/j.ssi.2017.03.028
Vincent, C., Silvain, J.E., Heintz, J.M. and Chandra, N. (2012) Effect of Porosity on the Thermal Conductivity of Copper Processed by Powder Metallurgy. Journal of Physics and Chemistry of Solids, 73, 499-504. https://doi.org/10.1016/j.jpcs.2011.11.033
Montes, J.M., Cuevas, F.G. and Cintas, J. (2008) Porosity Effect on the Electrical Conductivity of Sintered Powder Compacts. Applied Physics A, 92, 375-380. https://doi.org/10.1007/s00339-008-4534-y
Maxwell, J.C. (1998) A Treatise on Electricity and Magnetism. Clarendon Press, Dover, New York.
Malachlan, D.S. (1986) Equations for the Conductivity of Macroscopic Mixtures. Journal of Physics C: Solid State Physics, 19, 1339-1354. https://doi.org/10.1088/0022-3719/19/9/007
Montes, J.M., Rodriguez J.A. and Herrera, E.J. (2003) Thermal and Electrical Conductivities of Sintered Powder Compacts. Powder Metallurgy, 46, 251-256. https://doi.org/10.1179/003258903225008544
Montes-Hernández, G., Fernández-Martínez, A., Charlet, L., Tisserand, D. and Renard, F. (2008) Textural Properties of Synthetic Nano-Calcite Produced by Hydrothermal Carbonation of Calcium Hydroxide. Journal of Crystal Growth, 310, 2946-2953. https://doi.org/10.1016/j.jcrysgro.2008.02.012
Bruggeman, D.A.G. (1935) Berechnung Verschiedener Physikalischer Konstanten von Heterogenen Substanzen. I. Dielektrizitatskonstanten und Leitfahigkeiten der Mischkorper aus Isotropen Substanzen. Annalen der Physik, 416, 636-664. https://doi.org/10.1002/andp.19354160705
Bergman, D.J. (1978) The Dielectric Constant of a Composite Material—A Problem in Classical Physics. Physics Reports, 43, 377-407. https://doi.org/10.1016/0370-1573(78)90009-1
Bergman, D.J. (1982) Rigorous Bounds for the Complex Dielectric Constant of a Two-Component Composite. Annals of Physics, 138, 78-114. https://doi.org/10.1016/0003-4916(82)90176-2