A technological clayey sandstone sample from Wadi Qena locality, Eastern Desert of Egypt, was directed to processing. Fine kaolin and clean silica sand were produced after intensive attrition scrubbing of the sample. To increase the quality of the produced silica, it was subjected to reverse anionic flotation to minimize its iron content. In this respect, conventional flotation tests using three anionic oxyhydryl surfactants namely: sodium dodecyl benzene sulphonate, sodium naphtha sulphonate, and sodium dodecyl sulphate, were tried. Results showed a privilege action for sodium dodecyl sulphate to remove most of the iron oxide content of the sample. A statistical Box-Behnken design was constructed to optimize the process efficiency. It was shown that from a flotation feed contained 360 ppm Fe 2 O 3 and 1190 ppm Al 2 O 3 , sand concentrate contained 29 ppm Fe 2 O 3 and 564 ppm Al 2 O 3 , was produced. The optimum flotation conditions were 3.86 kg/t sodium dodecyl sulphate dose, 3.22 flotation pulp pH, 1226 rpm impeller speed, and 22.24 L/min airflow rate. Variables interaction effects results showed that flotation separation efficiency was significantly influenced by air flow rate and cell impeller speed of the process.
Kawatra, S.K. (2011) Fundamental Principles of Froth Flotation. In: Darling, P., Ed., SME Mining Engineering Handbook, Vol. 2, 3rd Edition, Society for Mining Metallurgy and Exploration, Littleton, CO, 1517-1531.
Wills, B.A. and Finch, J. (2015) Wills’ Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery. 8th Edition, Butter-worth-Heinemann, Oxford. https://doi.org/10.1016/C2010-0-65478-2
Balagueiras, F. (2015) Application of a Novel Green Collector for Iron Oxide Removal in Glass Sand through Froth Flotation. Geologic and Mine Engineering Department, Instituto Superior Técnico, Lisboa.
Zhang, X., Gu, X., Han, Y., Álvarez, N.P., Claremboux, V. and Kawatra, S.K. (2021) Flotation of Iron Ores: A Review. Mineral Processing and Extractive Metallurgy Review, 42, 184-212. https://doi.org/10.1080/08827508.2019.1689494
Kobayashi, M., Yuki, S. and Adachi, V. (2016) Effect of Anionic Surfactants on the Stability Ratio and Electrophoretic Mobility of Colloidal Hematite Particles. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 510, 190-197. https://doi.org/10.1016/j.colsurfa.2016.07.063
Quast, K. (2017) Literature Review on the Use of Natural Products in the Flotation of Iron Oxide Ores. Minerals Engineering, 108, 12-24. https://doi.org/10.1016/j.mineng.2017.01.008
Nakhaei, F. and Irannajad, M. (2018) Reagents Types in Flotation of Iron Oxide Minerals: A Review. Mineral Processing and Extractive Metallurgy Review, 39, 89-124. https://doi.org/10.1080/08827508.2017.1391245
Seguel, F., Soto, I., Krommenacker, N., Maldonado, M. and Becerra-Yoma, N. (2015) Optimizing Flotation Bank Performance through Froth Depth Profiling: Revisited. Minerals Engineering, 77, 179-184. https://doi.org/10.1016/j.mineng.2015.03.008
Meng, J., Tabosa, E., Xie, W., Runge, K. and Bradshaw, D. (2016) A Review of Turbulence Measurement Techniques for Flotation. Minerals Engineering, 95, 79-95. https://doi.org/10.1016/j.mineng.2016.06.007
Sovechles, J.M., Lepage, M.R., Johnson, B. and Waters, K.E. (2016) Effect of Gas Rate and Impeller Speed on Bubble Size in Frother-Electrolyte Solutions. Minerals Engineering, 99, 133-141. https://doi.org/10.1016/j.mineng.2016.08.021
Meng, J., Xie, W., Tabosa, E., Runge, K. and Bradshawa, D. (2016) Turbulence Model Development for Flotation Cells Based on Piezoelectric Sensor Measurements. International Journal of Mineral Processing, 156, 116-126. https://doi.org/10.1016/j.minpro.2016.05.013
Nguyen, A.V., An-Vo, D.-A., Tran-Cong, T. and Evans, G.M. (2016) A Review of Stochastic Description of the Turbulence Effect on Bubble-Particle Interactions in Flotation. International Journal of Mineral Processing, 156, 75-86. https://doi.org/10.1016/j.minpro.2016.05.002
Xie, W., Meng, J. and Nguyen, A.V. (2016) Experimental Quantification of Turbulence and Its Applications in the Study of Multiphase Flotation Pulps. International Journal of Mineral Processing, 156, 87-98. https://doi.org/10.1016/j.minpro.2016.06.011
Amini, E., Bradshaw, D.I. and Xie, W. (2016) Influence of Flotation Cell Hydrodynamics on the Flotation Kinetics and Scale up, Part 1: Hydrodynamic Parameter Measurements and Ore Property Determination. Minerals Engineering, 99, 40-51. https://doi.org/10.1016/j.mineng.2016.09.024
Tabosa, E., Runge, K., Holtham, P. and Duffy, K. (2016) Improving Flotation Energy Efficiency by Optimizing Cell Hydrodynamics. Minerals Engineering, 96-97, 194-202. https://doi.org/10.1016/j.mineng.2016.05.002
Safari, M., Harris, M., Deglon, D., Filho, L.L. and Testa, F. (2016) The Effect of Energy Input on Flotation Kinetics. International Journal of Mineral Processing, 156, 108-115. https://doi.org/10.1016/j.minpro.2016.05.008
Yianatos, J., Bergh, L., Vinnett, L., Panire, I. and Iriarte, V. (2016) Correlation between the Top of Froth Grade and the Operational Variables in Rougher Flotation Circuits. Minerals Engineering, 99, 151-157. https://doi.org/10.1016/j.mineng.2016.08.018
Xing, Y., Gui, X., Pan, L., Pinchasik, B.E., Cao, Y., Liu, J., Kappl, M. and Butt, H.J. (2017) Recent Experimental Advances for Understanding Bubble-Particle Attachment in Flotation. Advances in Colloid and Interface Science, 246, 105-132. https://doi.org/10.1016/j.cis.2017.05.019
Shean, B., Hadler, K. and Cilliers, J.J. (2017) A Flotation Control System to Optimize Performance Using Peak Air Recovery. Chemical Engineering Research and Design, 117, 57-65. https://doi.org/10.1016/j.cherd.2016.10.021
Norori-Mccormac, A., Brito-Parada, P.R., Hadler, K., Cole, K. and Cilliers, J.J. (2017) The Effect of Particle Size Distribution on Froth Stability in Flotation. Separation and Purification Technology, 184, 240-247. https://doi.org/10.1016/j.seppur.2017.04.022
Li, D., Yin, W., Liu, Q., Cao, S., Sun, Q., Zhao, C. and Yao, J. (2017) Interactions between Fine and Coarse Hematite Particles in Aqueous Suspension and Their Implications for Flotation. Minerals Engineering, 114, 74-81. https://doi.org/10.1016/j.mineng.2017.09.012
Eskanlou, A., Khalesi, M.R., Abdollahy, M. and Chegeni, M.H. (2018) Interactional Effects of Bubble Size, Particle Size, and Collector Dosage on Bubble Loading in Column Flotation. Journal of Mining & Environment, 9, 107-116.
Shrimali, K., Atluri, V., Wang, Y., Bacchuwar, S., Wang, X. and Miller, J.D. (2018) The Nature of Hematite Depression with Cornstarch in the Reverse Flotation of Iron Ore. Journal of Colloid and Interface Science, 524, 337-349. https://doi.org/10.1016/j.jcis.2018.04.002
Luo, X., Song, S., Ma, M., Wang, Y., Zhou, Y. and Zhang, Y. (2019) Effect of Particle Size on Flotation Performance of Hematite. Physicochemical Problems of Mineral Processing, 55, 479-493. https://doi.org/10.5277/ppmp18156
Irannajad, M., Nuri, O.S. and Mehdilo, A. (2019) Surface Dissolution-Assisted Mineral Flotation: A Review. Journal of Environmental Chemical Engineering, 7, Article ID: 103050. https://doi.org/10.1016/j.jece.2019.103050
St. Laurent, J.B., de Buzzaccarini, F., De Clerck, K., Demeyere, H., Labeque, R., Lodewick, R. and Langenhove, L. (2007) Laundry Cleaning of Textiles. In: Johansson, I. and Somasundaran, P., Eds., Handbook for Cleaning/Decontamination of Surfaces, Vol. 1, Elsevier, Amsterdam, 57-102. https://doi.org/10.1016/B978-044451664-0/50003-6