Sulphuric Acid Bake-Leach Process for the Treatment of Mixed Copper-Cobalt Oxide Ores
- 1 Department of Metallurgy and Mineral Processing, University of Zambia, Lusaka, Zambia
- 2 Department of Metallurgy and Mineral Processing, University of Zambia, Lusaka, Zambia
- 3 Department of Metallurgy and Mineral Processing, University of Zambia, Lusaka, Zambia
- 4 Metallurgy Department, Copperbelt University, Kitwe, Zambia
Abstract
A sulphuric acid bake–leach method for the treatment of mixed copper-cobalt oxide minerals was investigated as an alternative to the reductive leaching method. Sulphuric acid bake-leach process of the mixed copper-cobalt oxide ore was carried out by mixing the sample with sulphuric acid followed by baking of the mixture in a muffle furnace. Baking tests were conducted at different conditions such as temperature, time, and varying amounts of acid. The reacted samples were then subjected to water leaching at room temperature to determine the leachability of copper and cobalt from the baked material. The dissolutions of copper and cobalt were dependent on acid concentration with cobalt showing more sensitivity to the amount of acid. Both copper and cobalt were extracted from the baked material within short leaching times and without the addition of reducing agents. The outcome of this work has shown that the sulphuric acid bake-leach process is a possible alternative to the reductive leaching method for copper-cobalt oxide ores.
- Crundwell, F.K., Moats, M., Ramachandran, V., Robinson, T. and Davenport, W. (2011) Extractive Metallurgy of Nickel, Cobalt and Platinum Group Metals. Elsevier, Oxford. https://doi.org/10.1016/B978-0-08-096809-4.10038-3
- USGS (2020) Mineral Commodity Summaries 2020. U.S. Geological Survey, Reston.
- Seo, S., Choi, W., Kim, M. and Tran, T. (2013) Leaching of a Cu-Co Ore from Congo Using Sulphuric Acid-Hydrogen Peroxide Leachants. Journal of Mining and Metallurgy, Section B: Metallurgy, 49, 1-7. https://doi.org/10.2298/JMMB120103035S
- Kafumbila, K. (2018) Dissolution of Cobalt (III) Using Simultaneously Ferrous and Sulfur Dioxide as Reducing Reagents Performed in Open Agitated Tank: Kinetic Model. 1-12.
- Kampolobwe, C., Mwana, M.S., Musala, M.K., Mbayo, C.K. and Mbayo, H.I. (2020) Approach Ruashi Mining Plants Tried Lubumbashi (Dr Congo) (Case of the Company Ruashi Mining S.A.S). International Journal of Research in Social Sciences, 10, 1-22.
- Stuurman, S., Ndlovu, S. and Sibanda, V. (2014) Comparing the Extent of the Dissolution of Copper-Cobalt Ores from the DRC Region. Journal of the Southern African Institute of Mining and Metallurgy, 114, 347-353.
- Prasad, M.S. (1989) Production of Copper and Cobalt at Gecamines, Zaire. Minerals Engineering, 2, 521-541. https://doi.org/10.1016/0892-6875(89)90087-3
- Mwema, M., Mpoyo, M. and Kafumbila, K. (2002) Use of Sulphur Dioxide as Reducing Agent in Cobalt Leaching at Shituru Hydrometallurgical Plant. The Journal of the South African Institute of Mining and Metallurgy, 102, 1-4.
- Miller, G. (2009) Design of Copper-Cobalt Hydrometallurgical Circuits. ALTA Nickel—Cobalt Conference. Perth.
- Ferron, C.J. and Henry, P. (2008) The Use of Ferrous Sulphate to Enhance the Dissolution of Cobaltic Minerals. In: Young, C.A., Taylor, P.R. and Anderson, C.G., Eds., Hydrometallurgy 2008, Society for Mining, Metallurgy & Exploration, Littleton, CO, 1088-1097.
- Morgan, H. (1933) United States of America Patent No. 1895811, Process of Treating Ores.
- Prater, J., Queneau, P. and Hudson, T. (1970) The Sulfation of Copper-Iron Sulfides with Concentrated Sulfuric Acid. Journal of Metals, 22, 23-27. https://doi.org/10.1007/BF03355675
- Safarzadeh, S.M., Moats, M.S. and Miller, J.D. (2012) Acid Bake-Leach Process for the Treatment of Enargite Concentrates. Hydrometallurgy, 119-120, 30-39. https://doi.org/10.1016/j.hydromet.2012.03.002