Slag is waste from pyrometallurgical processing, usually stored in stacks or warehouses around or near smelters. Slag research has focused on potential environmental problems associated with slag weathering or processing for secondary metal recovery and/or other uses (construction, landscaping, etc.). Located in northern Mexico, the city of Chihuahua has a mining history that dates back to the eighteenth century. A lead smelter located southeast of Chihuahua City; closed in 1997, leaving behind a large pile of slag. In this study, a chemical analysis of smelter slag was carried out. The tailings contain Zn (15 - 35 wt%), Pb (0.5 - 4 wt%), As (0.6 wt%), Sn (888 ppb) and Hg (170 ppb). XRD identified several minerals such as hardystonite (Ca 2 ZnSi 2 O 7 ), melanotekite ( ), kentrolite ( ) and sphalerite (ZnS) in the glass. Major elements are present in phases such as monticellite (CaMgSiO 4 ), kirschsteinite (CaFe 2+ SiO 4 ), hedenbergite (CaFe 2+ Si 2 O 6 ), babingtonite (Fe 2 Si 3 O 9 ), magnetite (Fe 3 O 4 ), and calcite (CaCO 3 ). Whether the goal is reuse, recycling or remediation, research into the properties of slag and its environmental and health impacts (on vulnerable exposed populations) should continue to be relevant.
Solomon, C.C. (1993) Annual Report Slag—Iron and Steel. US Department of the Interior, Bureau of Mines, Washington, D.C. https://d9-wret.s3.us-west-2.amazonaws.com/assets/palladium/production/mineral-pubs/iron-steel-slag/790494.pdf
Reuter, M., Xiao, Y. and Boin, U. (2004) Recycling and Environmental Issues of Metallurgical Slags and Salt Fluxes. 7th International Conference on Molten Slags Fluxes and Salts, Johannesburg, 25-28 January 2004, 349-356. http://www.saimm.co.za/Conferences/MoltenSlags2004/349-Reuter.pdf
Saikia, N., Borah, R.R., Konwar, K. and Vandecastelee, C. (2018) pH Dependent Leachings of Some Trace Metals and Metalloid Species from Lead Smelter Slag and Their Fate in Natural Geochemical Environment. Groundwater for Sustainable Development, 7, 348-358. https://doi.org/10.1016/j.gsd.2018.01.009
Pan, D.A., Li, L., Tian, X., Wu, Y., Cheng, N. and Yu, H. (2019) A Review on Lead Slag Generation, Characteristics, and Utilization. Resources, Conservation and Recycling, 146, 140-155. https://doi.org/10.1016/j.resconrec.2019.03.036
Babu, V., Kabeer, K.S.A. and Vyas, A.K. (2022) A Review on the Characterization and Use of ISF Slag as Fine Aggregate in Cement Concrete. Materials Today: Proceedings, 65, 728-734. https://doi.org/10.1016/j.matpr.2022.03.281
Reddy, N.G. and Rao, B.H. (2022) Physico-Chemical and Mechanical Characterization of Ferrochrome Slag Aggregates for Utilization as a Road Material. In: Tutumluer, E., et al., Eds., Advances in Transportation Geotechnics IV, Vol. 164, Springer, Cham, 645-657. https://doi.org/10.1007/978-3-030-77230-7_49
Puziewicz, J., Zainoun, K. and Bril, H. (2007) Primary Phases in Pyrometallurgical Slags from a Zinc-Smelting Waste Dump, Swietochłowice, Upper Silesia, Poland. The Canadian Mineralogist, 45, 1189-1200. https://doi.org/10.2113/gscanmin.45.5.1189
Parsons, M.B., Bird, D.K., Einaudi, M.T. and Alpers, C.N. (2001) Geochemical and Mineralogical Controls on Trace Element Release from the Penn Mine Base-Metal Slag Dump, California. Applied Geochemistry, 16, 1567-1593. https://doi.org/10.1016/S0883-2927(01)00032-4
Ettler, V., Legendre, O., Bodénan, F. and Touray, J.C. (2001) Primary Phases and Natural Weathering of Old Lead-Zinc Pyrometallurgical Slag from Príbram, Czech Republic. The Canadian Mineralogist, 39, 873-888. https://doi.org/10.2113/gscanmin.39.3.873
Lottermoser, B.G. (2002) Mobilization of Heavy Metals from Historical Smelting Slag Dumps, North Queensland, Australia. Mineralogical Magazine, 66, 475-490. https://doi.org/10.1180/0026461026640043
Lind, B.B., Fällman, A.M. and Larsson, L.B. (2001) Environmental Impact of Ferrochrome Slag in Road Construction. Waste Management, 21, 255-264. https://doi.org/10.1016/S0956-053X(00)00098-2
Xu, D.M., Fu, R.B., Tong, Y.H., Shen, D.L. and Guo, X.P. (2021) The Potential Environmental Risk Implications of Heavy Metals Based on Their Geochemical and Mineralogical Characteristics in the Size-Segregated Zinc Smelting Slags. Journal of Cleaner Production, 315, Article ID: 128199. https://doi.org/10.1016/j.jclepro.2021.128199
Xu, D.M. and Fu, R.B. (2022) A Typical Case Study from Smelter-Contaminated Soil: New Insights into the Environmental Availability of Heavy Metals Using an Integrated Mineralogy Characterization. Environmental Science and Pollution Research, 29, 57296-57305. https://doi.org/10.1007/s11356-022-19823-6
Anove, K.M., Tchegueni, S., Degbe, K.A., Fiaty, K., Koriko, M., Drogui, P. and Tchangbedji, G. (2022) Physico-Chemical and Mineralogical Characterizations of Two Togolese Clays for Geopolymer Synthesis. Journal of Minerals and Materials Characterization and Engineering, 10, 400-409. https://doi.org/10.4236/jmmce.2022.105028
Chamling, P.K., Haldar, S. and Patra, S. (2020) Physico-Chemical and Mechanical Characterization of Steel Slag as Railway Ballast. Indian Geotechnical Journal, 50, 267-275. https://doi.org/10.1007/s40098-020-00421-7
ASTM (2018) ASTM C125-Standard Terminology Relating to Concrete and Concrete Aggregates. ASTM International, West Conshohocken.
Chesner, W.H., Collins, R.J., MacKay, M.H. and Emery, J. (2002) User Guidelines for Waste and By-Product Materials in Pavement Construction (No. FHWA-RD-97-148, Guideline Manual, Rept. No. 480017). Recycled Materials Resource Center, New Hampshire.
Amaral de Lima, L. (1999) Hormigones con escorias de horno eléctrico de arco como áridos: propiedades, durabilidad y comportamiento ambiental. Doctoral Dissertation, Ph.D. Thesis, Universitat Politecnica de Catalunya, Barcelona. (In Spanish)
Tossavainen, M., Engstrom, F., Yang, Q., Menad, N., Larsson, M.L. and Bjorkman, B. (2007) Characteristics of Steel Slag under Different Cooling Conditions. Waste Management, 27, 1335-1344. https://doi.org/10.1016/j.wasman.2006.08.002
Motz, H. and Geiseler, J. (2001) Products of Steel Slags an Opportunity to Save Natural Resources. Waste Management, 21, 285-293. https://doi.org/10.1016/S0956-053X(00)00102-1
Piatak, N.M., Seal II, R.R. and Hammarstrom, J.M. (2004) Mineralogical and Geochemical Controls on the Release of Trace Elements from Slag Produced by Base- and Precious-Metal Smelting at Abandoned Mine Sites. Applied Geochemistry, 19, 1039-1064. https://doi.org/10.1016/j.apgeochem.2004.01.005
COREMI (1994) Consejo de Recursos Minerales. Monografía Geológico-Minera del Estado de Chihuahua. (In Spanish)
Beltran, R. (2009) Fundición de Avalos: pilar de la economía por 84 años. El Heraldo de Chihuahua. (In Spanish) https://avalosblog.wordpress.com/2009/06/17/fundicion-de-avalos-pilar-de-la-economia-por-84-anos
SCT (1990) N-CMT-4∙02∙002/04 Características de los materiales (Materials’ Characteristics), Secretaría de Comunicaciones y Transporte, México. (In Spanish) https://normas.imt.mx/normativa/N-CMT-4-02-002-20.pdf
ASTM (2018) ASTM C131-06-Standard Test Method for Resistant to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine. ASTM International, West Conshohocken.
ASTM (2018) ASTM C29-Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate. ASTM International, West Conshohocken.
ASTM (2018) ASTM C127-07-Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. ASTM International, West Conshohocken.
ASTM (2018) ASTM C33/C33M-11-Standard Specification for Concrete Aggregates. ASTM International, West Conshohocken.
Zaefferer, S. (2011) A Critical Review of Orientation Microscopy in SEM and TEM. Crystal Research and Technology, 46, 607-628. https://doi.org/10.1002/crat.201100125
Suryanarayana, C. and Norton, M.G. (1998) X-Rays and Diffraction. In: Suryanarayana, C. and Grant Norton, M., Eds., X-Ray Diffraction: A Practical Approach, Springer, Boston, 3-19. https://doi.org/10.1007/978-1-4899-0148-4_1
ASTM (2018) ASTM C128-15-Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate. ASTM International, West Conshohocken.