This paper reports the modeling of residual compressive strength of fired clay bricks submitted to elevated temperature. Five formulations were used and the explored temperatures were 95 ? C, 200 ? C, 550 ? C, 700 ? C and 950 ? C. The stress–strain relationships and the mechanical properties (including Young’s modulus and compressive strength) were assessed using a uniaxial compressive strength machine. A proposed model equation was established and found satisfying. The elastic modulus was evaluated and tested with one existing model together with two proposed models. The proposed model was both satisfying and even more precise than the existing one. The overall results show that the effect of temperature on the mechanical properties of clays can be accurately described through the definition of thermal damage using elastic modulus.
Papayianni, J. and Valiasis, T. (1991) Residual Mechanical Properties of Heated Concrete Incorporating Different Pozzolanic Materials. Materials and Structures, 24, 115-121. https://doi.org/10.1007/BF02472472
Nassif, A.Y., Burley, E. and Rigden, S. (1995) A New Quantitative Method of Assessing Fire Damage to Concrete Structures. Magazine of Concrete Research, 47, 271-278. https://doi.org/10.1680/macr.1995.47.172.271
Wu, B., Ma, Z.C. and Ou, J.P. (1999) Experimental Research on Deformation and Constitutive Relationship of Concrete under Axial Loading and High Temperature. Journal of Building Structures, 20, 42-49.
Li, X.Y. and Bu, F.J. (2011) Residual Strength for Concrete after Exposure to High Temperatures. International Conference, ICCIC 2011, Wuhan, 17-18 September 2011, 382-390. https://doi.org/10.1007/978-3-642-23998-4_53
Khaliq, W. and Kodur, V. (2012) High Temperature Mechanical Properties of High-Strength Fly Ash Concrete with and without Fibers. ACI Materials Journal, 109, 665-674.
Kodur, V.K.R., Kumar, P. and Rafi, M.M. (2020) Fire Hazard in Buildings: Review, Assessment and Strategies for Improving Fire Safety. PSU Research Review, 4, 1-23. https://doi.org/10.1108/PRR-12-2018-0033
Kodur, V.K.R. and Naser, M.Z. (2020) Structural Fire Engineering. McGraw-Hill Publication, London.
Xie, Q.F., Zhang, L.P., Yin, S.H., et al. (2019) Effects of High Temperature on the Physical and Mechanical Properties of Carbonated Ordinary Concrete. Advances in Materials Science and Engineering, 2019, Article ID: 5753232. https://doi.org/10.1155/2019/5753232
Nishida, A. and Yamazaki, N. (1995) Study on the Properties of High Strength Concrete with Short Polypropylene Fiber for Spalling Resistance. In: Proceedings of the International Conference on Concrete under Severe Conditions. CONSEC 1995, E&FN Spon, London, 1141-1150.
Kalifa, P., Menneteau, F.-D. and Quenard, D. (2000) Spalling and Pore Pressure in HPC at High Temperatures. Cement and Concrete Research, 30, 1915-1927. https://doi.org/10.1016/S0008-8846(00)00384-7
Kalifa, P., Chene, G. and Galle (2001) High-Temperature Behaviour of HPC with Polypropylene Fibers from Spalling to Microstructure. Cement and Concrete Research, 31, 1487-1499. https://doi.org/10.1016/S0008-8846(01)00596-8
Cheng, P., Kodur, V.K.R. and Wang, T.-C. (2004) Stress-Strain Curves for High Strength Concrete at Elevated Temperatures. Journal of Materials in Civil Engineering, 16, 84-90. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:1(84)
Khaliq, W. and Kodur, V. (2011) Thermal and Mechanical Properties of Fiber Reinforced High Performance Self-Consolidating Concrete at Elevated Temperatures. Cement and Concrete Research, 41, 1112-1122. https://doi.org/10.1016/j.cemconres.2011.06.012
Khaliq, W. and Khan, H.A. (2015) High Temperature Material Properties of Calcium Aluminate Cement Concrete. Construction and Building Materials, 94, 475-487. https://doi.org/10.1016/j.conbuildmat.2015.07.023
Zhang, H.-Y. Kodur, V., Cao, L. and Qi, S.-L. (2014) Fiber Reinforced Geopolymers for Fire Resistance Applications. Procedia Engineering, 71, 153-158. https://doi.org/10.1016/j.proeng.2014.04.022
Kodur, V. (2014) Properties of Concrete at Elevated Temperatures. ISRN Civil Engineering, 2014, Article ID: 468510. https://doi.org/10.1155/2014/468510
Khaliq, W. and Farrukh, B.M. (2016) High Temperature Mechanical and Material Properties of Burnt Masonry Bricks. Materials and Structures, 49, 5195-5208. https://doi.org/10.1617/s11527-016-0854-0
Gautam, P.K., Verma, A.K., Maheshwar, S. and Singh, T.N. (2016) Thermomechanical Analysis of Different Types of Sandstone at Elevated Temperature. Rock Mechanics and Rock Engineering, 49, 1985-1993. https://doi.org/10.1007/s00603-015-0797-8
Gautam, P.K., Verma, A.K., Maheshwar, S. and Singh, T.N. (2018) Effect of High Temperature on Physical and Mechanical Properties of Jalore Granite. Journal of Applied Geophysics, 159, 460-474. https://doi.org/10.1016/j.jappgeo.2018.07.018
Gautam, P.K., Verma, A.K., Maheshwar, S. and Singh, T.N. (2018) Evolution of Thermal Damage Threshold of Jalore Granite. Rock Mechanics and Rock Engineering, 51, 2949-2956. https://doi.org/10.1007/s00603-018-1493-2
Gautam, P.K., Verma, A.K., Hu, W. and Singh, T.N. (2019) Experimental Investigations on the Thermal Properties of Jalore Granitic Rocks for Nuclear Waste Repository. Thermochimica Acta, 681, 178-381. https://doi.org/10.1016/j.tca.2019.178381
Gautam, P.K., Jha, M.K., Verma, A.K. and Singh, T.N. (2019) Evolution of Absorption Energy per Unit Thickness of Damaged Sandstone. Journal of Thermal Analysis and Calorimetry, 136, 2305-2318. https://doi.org/10.1007/s10973-018-7884-5
Naser, M.Z. and Uppala, V. (2020) Properties and Material Models for Construction Materials Post Exposure to Elevated Temperatures. Mechanics of Materials, 142, Article ID: 103293. https://doi.org/10.1016/j.mechmat.2019.103293
Anupama, K.D., Priyadarsini, R.S. and Narayanan, S. (2021) High Temperature Effects on Different Grades of Concrete. Sådhanå, 46, Article No. 31. https://doi.org/10.1007/s12046-020-01536-6
Russo, S. and Sciarretta, F. (2013) Masonry Exposed to High Temperatures: Mechanical Behaviour and Properties—An Overview. Fire Safety Journal, 5, 569-686. https://doi.org/10.1016/j.firesaf.2012.10.001
Roudouane, H.T., Mbey, J.A., Bayiga, E.C. and Ndjigui, P.-D. (2020) Characterization and Application Tests of Kaolinite Clays from Aboudeia (Southeastern Chad) in Fired Bricks Making. Scientific African, 7, e00294. https://doi.org/10.1016/j.sciaf.2020.e00294
Onana, V.L., Ntouala, R.F.D., Mbey, J.A., Ngo’oZe, A., Kabeyene, V.K. and Ekodeck, G.E. (2019) Mineralogy and Preliminary Assessment of the Potential Uses of Alluvial Clays from Batouri (Eastern-Cameroon). Ceramica, 65, 407-415. https://doi.org/10.1590/0366-69132019653752626
Bidoung, J.C., Pliya, P., Meukam, P., Noumowé, A. and Beda, T. (2016) Behaviour of Clay Bricks from Small-Scale Production Units after High Temperature Exposure. Materials and Structures, 49, 4991-5006. https://doi.org/10.1617/s11527-016-0838-0
Hsu, L.S. and Hsu, C.-T. (1994) Stress-Strain Behaviour of Steel-Fiber High Strength Concrete under Compression. Structural Journal, 91, 448-457. https://doi.org/10.1680/macr.1994.46.169.301
Marco, A. and Mauro, S. (2011) Mechanical Behaviour of Full Unit Masonry Panels under Fire Action. Fire Safety Journal, 46, 440-450. https://doi.org/10.1016/j.firesaf.2011.07.004
Manita, P., Sideris, K.K. and Savva, A. (2005) Influence of Elevated Temperatures on the Mechanical Properties of Blended Cement Concretes Prepared with Limestone and Siliceous Aggregates. Cement and Concrete Composites, 27, 239-248. https://doi.org/10.1016/j.cemconcomp.2004.02.013
Ma, Q.M., Guo, R.X., Zhao, Z.M., Lin, Z.W. and He, K.H. (2015) Mechanical Properties of Concrete at High Temperature—A Review. Construction and Building Materials, 93, 371-383. https://doi.org/10.1016/j.conbuildmat.2015.05.131
Ercolani, G., Ortega, N.F., Priano, C. and Senas, L. (2017) Physical-Mechanical Behaviour of Concretes Exposed to High Temperatures and Different Cooling Systems. Structural Concrete, 18, 487-495. https://doi.org/10.1002/suco.201500202
Zeng, L., Ren, W.T. and Zou, Z.T. (2019) Experimental Study on Seismic Behaviour of Frame Structures Composed of Concrete Encased Columns with L-Shaped Steel Section and Steel Beams. Earthquakes and Structures, 16, 97-107.
Xiang, S., Zeng, L., Zhang, J., Chen, J., Liu, Y., Cheng, G. and Mo, J. (2019) A DIC-Based Study on Compressive Responses of Concrete after Exposure to Elevated Temperatures. Materials, 12, Article No. 2044. https://doi.org/10.3390/ma12132044
Mander, J.B., Priestley, M.J.N. and Park, R. (1988) Theoretical Stress-Strain Model for Confined Concrete. Journal of Structural Engineering, 114, 1804-1825. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804)
Youssef, M.A. (2007) General Stress-Strain Relationship for Concrete at Elevated Temperatures. Engineering Structures, 29, 2618-2634. https://doi.org/10.1016/j.engstruct.2007.01.002
Mbumbia, L., Mertens de Wilmars, A. and Tirlocq, J. (2000) Performance Characteristics of Lateritic Soil Bricks Fired at Low Temperatures: A Case Study of Cameroon. Construction and Building Materials, 14, 121-131. https://doi.org/10.1016/S0950-0618(00)00024-6
Mbumbia, L. and Mertens de Wilmars, A. (2002) Behaviour of Low-Temperature Fired Laterite Bricks under Uniaxial Compressive Loading. Construction and Building Materials, 16, 101-112. https://doi.org/10.1016/S0950-0618(01)00035-6
Johari, I., Said, S., Hisham, B., Bakar, A. and Ahmad, Z.A. (2010) Effect of the Change of Firing Temperature on Microstructure and Physical Properties of Clay Bricks from Beruas (Malaysia). Science of Sintering, 42, 245-254. https://doi.org/10.2298/SOS1002245J
Li, N., Ma, X.F., Zhang, S.C., et al. (2020) Thermal Effects on the Physical and Mechanical Properties and Fracture Initiation of Laizhou Granite during Hydraulic Fracturing. Rock Mechanics and Rock Engineering, 53, 2539-2556. https://doi.org/10.1007/s00603-020-02082-7
Russo, S. and Sciarretta, F. (2012) Experimental and Theoretical Investigation on Masonry after High Temperature Exposure. Experimental Mechanics, 52, 341-359. https://doi.org/10.1007/s11340-011-9493-0
NgonNgon, G.F., Yongue-Fouateu, R., Bitom, D.L. and Bilong, P. (2009) A Geological Study of Clayey Laterite and Clayey Hydromorphic Material of the Region of Yaoundé (Cameroon): A Prerequisite for Local Material Promotion. Journal of African Earth Sciences, 55, 69-78. https://doi.org/10.1016/j.jafrearsci.2008.12.008
Domingo, J.C. and Chu, K.-H. (1985) Stress-Strain Relationship for Plain Concrete in Compression. Journal Proceedings, 82, 797-804.
Eurocode 6 (2005) Design of Masonry Structures—Part 1-1: General Rules for Reinforced and Unreinforced Masonry Structures.
Nguyen, Th.-D., Meftah, F., Chammas, R. and Mebarki, A. (2009) The Behaviour of Masonry Walls Subjected to Fire: Modelling and Parametric Studies in the Case of Hollow Burnt-Clay Bricks. Fire Safety Journal, 44, 629-641. https://doi.org/10.1016/j.firesaf.2008.12.006
Ying, C., Zhang, L., Xie, H., Liu, J., Liu, H. and Yang, B. (2019) Damage Ratio Based on Statistical Damage Constitutive Model for Rock. Mathematical Problems in Engineering, 2019, Article ID: 3065414. https://doi.org/10.1155/2019/3065414
Zhao, H., Wang, Y. and Liu, F.Q. (2017) Stress-Strain Relationship of Coarse RCA Concrete Exposed to Elevated Temperatures. Magazine of Concrete Research, 69, 1-16.