In Burkina Faso, one of the three largest gold producers in West Africa, foundry activity is often paralyzed when basic equipment such as crucibles and cups are not available or should be imported. However, previous studies have shown the availability of kaolinite-rich clay resources that could be used for the local manufacture of silico-aluminous ceramic crucibles. This work allowed to manufacture industrial ceramic crucibles with local clays and then they were tested in foundry industry. The materials were manufactured from three (03) raw materials including two clays (SAB and ROU) and sand. The chemical and mineral analysis has shown that the raw materials are suitable for the formulation of refractory materials. The results of characterization of the materials formulated showed that the properties of use are appreciable. The porosity of the materials is relatively low (23 - 28 vol % ) with a diametral compressive strength between 0.61 and 1.34 MPa. Crucibles sintered at 1250 ˚ C with a stay of 2 hours have a mechanical strength capable of supporting the weight of the ores contained. These crucibles have a refractoriness under load (T0.5) above 1141 ˚ C and resist chemical attacks. Tests were carried out in the industry at 1100 ˚ C, and the results were satisfactory.
Sawadogo, M., Sanou, I., Dah, Y., Traoré, B., sawadogo, Y., Samaké, D., Dembelé, C., Zerbo, L. and Seynou, M. (2021) Résistance Aux Chocs Thermiques Etaux Attaques Chimiquesde Briques Réfractaires à Base d’argile Kaolinitique et de Sable. Journal de la Société Ouest-Africaine de Chimie, 50, 50-56.
Seynou, M., Millogo, Y., Traoré, K., Tirlocq, J. and Ouedraogo, R. (2011) Firing Transformations and Properties of Tiles from a Clay from Burkina Faso. Applied Clay Science, 51, 499-502. https://doi.org/10.1016/j.clay.2011.01.002
Seynou, M., Flament, P., Traoré Dah, Y., Tirlocq, J. and Ouedraogo, R. (2014) Elaboration of Refractory Bricks with a Raw Clay Material from Burkina Faso. Physical Chemistry News, 71, 68-75.
Adeoti, M.O., Dahunsi, O.A., Awopetu, O.O., Aramide, F.O., Alabi, O.O., Johnson, O.T. and Abdulkarim, A.S. (2019) Suitability of Selected Nigerian Clays for Foundry Crucibles Production. Procedia Manufacturing, 35, 1316-1323. https://doi.org/10.1016/j.promfg.2019.05.023
El Haddar, A., Manni, A., Azdimousa, A., El Amrani El Hassani, I.E., Bellil, A., Sadik, C., Fagel, N. and El Ouahabi, M. (2019) Elaboration of a High Mechanical Performance Refractory from Halloysite and Recycled Alumina. Boletín de la Sociedad Española de Cerámica y Vidrio, 59, 95-104. https://doi.org/10.1016/j.bsecv.2019.08.002
Rat, E., Martínez-Martínez, S., Sanchez-Garrido, J.A., Villarejo, L.P., Garzon, E. and Sanchez-Soto, P.J. (2023) Characterization, Thermal and Ceramic Properties of Clays from Alhabia (Almería, Spain). Ceramics International, 49, 14814-14825. https://doi.org/10.1016/j.ceramint.2022.05.328
Barry, K., Lecomte-Nana, G.L., Seynou, M., Faucher, M. and Blanchart, P. (2022) Comparative Properties of Porous Phyllosilicate-Based Ceramics Shaped by Freeze-Tape Casting. Ceramics, 5, 75-96. https://doi.org/10.3390/ceramics5010007
Boussen, S., Sghaier, D., Chaabani, F., Jamoussi, B. and Bennour, A. (2016) Characteristics and Industrial Application of the Lower Cretaceous Clay Deposits (Bouhedma Formation), Southeast Tunisia: Potential Use for the Manufacturing of Ceramic Tiles and Bricks. Applied Clay Science, 123, 210-211. https://doi.org/10.1016/j.clay.2016.01.027
Comité de pilotage de l’Initiative pour la Transparence dans les Industries Extractives du Burkina Faso 5ITIE-BF (2022) Rapport Annuel d’avancement 2021.
Qingdao Decent Group (2023) Qingdao Decent Group Unveils Innovative Containerized Sample Peparation.
Zhang, Y., Wang, K., Wang, B. and Zhang, C. (2020) Thermal Shock Resistance of Porous Ceramic Foams with Temperature-Dependent Materials Properties. Ceramics International, 46, 1503-1511. https://doi.org/10.1016/j.ceramint.2019.09.117
Kam, S., Zerbo, L., Seynou, M., Soro, J., Traoré, K., Bathiebo, D.J., Millogo, Y., Ouédraogo, R., Gomina, M. and Blanchart, P. (2009) Céramiques d’argile Du Burkina Faso Utilisées En Construction Immobilière. Journal de la Société Ouest-Africaine de Chimie, 27, 55-62.
Sawadogo, M., Seynou, M., Zerbo, L., Sorgho Yameogo, A., Millogo, Y. and Ouédraogo, R. (2016) Densification Behaviour of Chamotte Grog for Refractory Bricks: Mineralogy and Microstructure. Journal de la Société Ouest-Africaine de Chimie, 41, 1-10.
Ekpunobi, U.E., Agbo, S.U. and Ajiwe, V.I.E. (2019) Evaluation of the Mixtures of Clay, Diatomite, and Sawdust for Production of Ceramic Pot Filters for Water Treatment Interventions Using Locally Sourced Materials. Journal of Environmental Chemical Engineering, 7, Article ID: 102791. https://doi.org/10.1016/j.jece.2018.11.036
Rambaldi, E., Lucchese, B. and Bignozzi, M.C. (2017) Protective Treatments for Lapped Porcelain Stoneware Tiles and Evaluation of Their Cleanability. Ceramics-Silikáty, 61, 285-292. https://doi.org/10.13168/cs.2017.0027
Sudha, P.N., Vanisri, N., Sangeetha, K., Jisha Kumari, A.V. and Rani, K. (2019) Corrosion of Ceramic Materials. Fundamental Biomaterials: Ceramics, 9, 223-250. https://doi.org/10.1016/B978-0-08-102203-0.00009-3
(2007) Refractory Products—Determination of Refractoriness under Load—Differential Method with Rising Temperature. ISO 1893:2007.
Luz, A.P., Gomes, D.T. and Pandolfelli, V.C. (2017) Maximum Working Temperature of Refractory Castables: Do We Really Know How to Evaluate It? Ceramics International, 43, 9077-9083. https://doi.org/10.1016/j.ceramint.2017.04.053
Samain, L., Jaworski, A., Edén, M., Ladd, D.M., Seo, D.K., Garcia-Garcia, F.J. and Häussermann, U. (2014) Structural Analysis of Highly Porous γ-Al2O3. Journal of Solid State Chemistry, 217, 1-8. https://doi.org/10.1016/j.jssc.2014.05.004
Zemánek, D., Lang, K., Tvrdík, L., Všiansky, P., Nevrivová, L., Štursa, P., Kovár, P., Keršnerová, L. and Dvorák, K. (2021) Development and Properties of New Mullite Based Refractory Grog. Materials, 14, Article 779. https://doi.org/10.3390/ma14040779
Martín-Márquez, J., Ma Rincón, J. and Romero, M. (2010) Mullite Development on Firing in Porcelain Stoneware Bodies. Journal of the European Ceramic Society, 30, 1599-1607. https://doi.org/10.1016/j.jeurceramsoc.2010.01.002
Barry, K., Lecomte-Nana, G.L., Seynou, M., Faucher, M., Blanchart, P. and Peyratout, C. (2022) Properties of Phyllosilicate-Based Porous Ceramics Shaped by Conventional Tape Casting and Freeze Tape Casting. International Journal of Applied Ceramic Technology, 19, 3084-3098. https://doi.org/10.1111/ijac.14126
Chargui, F., Belhou, H., Hamidouche, M., Jorande, Y., Douf, R. and Fantozzi, G. (2018) Mullite fabrication from natural kaolin and aluminium slagProducción de mullita a partir de caolín natural y escoria de aluminio. Boletín de la Sociedad Española de Cerámica y Vidrio, 57, 169-177. https://doi.org/10.1016/j.bsecv.2018.01.001
Pilate, P., Lardot, V., Cambier, F. and Brochen, E. (2015) Contribution to the Understanding of the High Temperature Behavior and of the Compressive Creep Behavior of Silica Refractory Materials. Journal of the European Ceramic Society, 35, 813-822. https://doi.org/10.1016/j.jeurceramsoc.2014.09.019
Sawadogo, M., Seynou, M., Zerbo, L., Sorgho, B., Lecomte-Nana, G.L., Blanchart, P. and Ouédraogo, R. (2020) Formulation of Clay Refractory Bricks: Influence of the Nature of Chamotte and the Alumina Content in the Clay. Advances in Materials, 9, 59-67. https://doi.org/10.11648/j.am.20200904.11