CO<sub>2</sub> Transformation at Controlled Temperature with Lithium Hydroxide Solution and Metallic Lithium — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
CO<sub>2</sub> Transformation at Controlled Temperature with Lithium Hydroxide Solution and Metallic Lithium
Departamento de Química, Gerencia de Ciencias Básicas, Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca, S/N. La Marquesa Ocoyoacác, Estado de México, Mexico
,
Departamento de Química, Gerencia de Ciencias Básicas, Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca, S/N. La Marquesa Ocoyoacác, Estado de México, Mexico
1 Departamento de Química, Gerencia de Ciencias Básicas, Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca, S/N. La Marquesa Ocoyoacác, Estado de México, Mexico
2 Departamento de Química, Gerencia de Ciencias Básicas, Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca, S/N. La Marquesa Ocoyoacác, Estado de México, Mexico
This paper presents a study on CO<sub>2</sub> atmospheric transformation which was reacted directly with lithium hydroxide solution and metallic lithium. This solution was obtained through the reaction between metallic lithium and deionized water where hydrogen is produced and by exposing the metal at ambient conditions. In the transformation process, atmospheric CO<sub>2</sub> gas reacts directly with LiOH solution, in both cases, the CO<sub>2</sub> transformation kinetics was different. For this purpose, reactions between CO<sub>2</sub> and LiOH solution were carried out under controlled temperature and the second process only with metallic lithium, which was exposed at room temperature, however, in these two processes lithium carbonate oxide was formed and identified. According to the results, the efficiency in CO<sub>2</sub> transformation is a function of temperature value which was variable until completely obtaining the by-product, its XRD characterization indicated the formation only of Li<sub>2</sub>CO<sub>3</sub> in both procedures. Under laboratory conditions lithium compounds selectively reacted with CO<sub>2</sub>. In the same way, there is an alternative procedure to obtain LiOH and Li<sub>2</sub>CO<sub>3</sub> for different applications in various areas.
Kim, S., Choi, M., Kang, J.S., Joo, H., Park, B.H., Sung, Y.E. and Yoon, J. (2021) Electrochemical Recovery of LiOH from Used CO 2 Adsorbents. Catalysis Today , 359, 83-89. https://doi.org/10.1016/j.cattod.2019.06.056
Zilberman, P. (2015) The CO 2 Absorber Based on LiOH. Acta Medica Marisiensis , 61, 4-6. https://doi.org/10.1515/amma-2015-0023
Kaneco, S., Katsumata, H., Suzuki, T. and Ohta, K. (2006) Photoelectrocatalytic Reduction of CO 2 in LiOH/Methanol at Metal-Modified p-InP Electrodes. Applied Catalysis B : Environmental , 64, 139-145. https://doi.org/10.1016/j.apcatb.2005.11.012
Yang, X., Li, S., Zhao, J., Huang, H. and Deng, L. (2022) Development of Covalent-Organic Frameworks Derived Hierarchical Porous Hollow Carbon Spheres Based LiOH Composites for Thermochemical Heat Storage. Energy Chemistry , 73, 301-310. https://doi.org/10.1016/j.jechem.2022.06.022
Cho, Y., Lee, J.Y., Bokare, A.D., Kwon, S.B., Park, D.S., Jung, W.S. and Choi, W. (2015) LiOH-Embedded Zeolite for Carbon Dioxide Capture under Ambient Conditions. Journal of Industrial and Engineering Chemistry , 22, 350-356. https://doi.org/10.1016/j.jiec.2014.07.030
Izquierdo, M.T., Gasquet, V., Sansom, E., Ojeda, M., Garcia, S. and Maroto-Valer, M.M. (2018) Lithium-Based Sorbents for High Temperature CO 2 Capture: Effect of Precursor Materials and Synthesis Method. Fuel , 230, 45-51. https://doi.org/10.1016/j.fuel.2018.05.041
Chang, Y., Huang, H., Wang, L., Li, Y. and Zhong, C. (2020) Synergistic Dual-Li Sites for CO 2 Separation in Metal-Organic Framework Composites. Chemical E n gineering Journal , 402, Article ID: 126201. https://doi.org/10.1016/j.cej.2020.126201
Grasso, M.L., Arneodo, L.P. and Gennari, F.C. (2020) CO 2 Capture Properties of Li 4 SiO 4 after Aging in Air at Room Temperature. Journal of CO 2 Utilization , 38, 232-240. https://doi.org/10.1016/j.jcou.2020.02.002
Yang, Y., Yao, S., Hu, Y., Sun, J., Cao, J., Li, Q. and Liu W. (2020) Mechanochemically Activated Li 4 SiO 4 -Based Adsorbent with Enhanced CO 2 Capture Performance and Its Modification Mechanisms. Fuel , 273, Article ID: 117749. https://doi.org/10.1016/j.fuel.2020.117749
Zhao, Y., Xiang, X., Wang, M., Wang, H., Li, Y., Li, J. and Yang, H. (2021) Preparation of LiOH through BMED Process from Lithium-Containing Solutions: Effects of Coexisting Ions and Competition between Na and Li . Desalination , 512, Article ID: 115126. https://doi.org/10.1016/j.desal.2021.115126
Joo, S., Shim, H.W., Choi, J.J., Lee, C.G. and Kim, D.G. (2020) A Method of Synthesizing Lithium Hydroxide Nanoparticles Using Lithium Sulfate from Spent Batteries by 2-Step Precipitation Method. Korean Journal of Metals and Materials , 58, 286-291. https://doi.org/10.3365/KJMM.2020.58.4.286
Lin, J., Li, Q., Chen, X., Li, C., Lu, S. and Liew, K.M. (2019) Sorption-Enhanced CO Capture over Cu-Mn-Ce Composite Oxides with LiOH Addition: CO Oxidation and in - Situ CO 2 Sorption. Chemical Engineering Journal , 371, 267-275. https://doi.org/10.1016/j.cej.2019.04.049
Zhao, Y., Wang, H., Li, Y., Wang, M. and Xiang, X. (2020) An Integrated Membrane Process for Preparation of Lithium Hydroxide from High Mg/Li Ratio Salt Lake Brine. Desalination , 493, Article ID: 114620. https://doi.org/10.1016/j.desal.2020.114620
Liu, H. and Azimi, G. (2022) Production of Battery Grade Lithium Hydroxide Monohydrate Using Barium Hydroxide Causticizing Agent. Resources , Conservation and Recycling , 179, Article ID: 106115. https://doi.org/10.1016/j.resconrec.2021.106115
Stefanelli, E., Puccini, M., Vitolo, S. and Seggiani, M. (2020) CO 2 Sorption Kinetic Study and Modeling on Doped-Li 4 SiO 4 under Different Temperatures and CO 2 Partial Pressures. Chemical Engineering Journal , 379, Article ID: 122307. https://doi.org/10.1016/j.cej.2019.122307
Miao, Y., Pudukudy, M., Zhi, Y., Miao, Y., Shan, S., Jia, Q. and Ni, Y. (2020) A Facile Method for in Situ Fabrication of Silica/Cellulose Aerogels and Their Application in CO 2 Capture. Carbohydrate Polymers , 236, Article ID: 116079. https://doi.org/10.1016/j.carbpol.2020.116079
Wang, J., Park, Y.K. and Jo, Y.M. (2020) Sequential Improvement of Activated Carbon Fiber Properties for Enhanced Removal Efficiency of Indoor CO 2 . Journal of Industrial and Engineering Chemistry , 89, 400-408. https://doi.org/10.1016/j.jiec.2020.06.011
Chen, X., Zhao, Z., Hao, M. and Wang, D. (2013) Research of Hydrogen Generation by the Reaction of Al-Based Materials with Water. Journal of Power Sources , 222, 188-195. https://doi.org/10.1016/j.jpowsour.2012.08.078
Khzouz, M., Gkanas, E.I., Girella, A., Statheros, T. and Milanese, C. (2020) Sustainable Hydrogen Production via LiH Hydrolysis for Unmanned Air Vehicle (UAV) Applications. International Journal of Hydrogen Energy , 45, 5384-5394. https://doi.org/10.1016/j.ijhydene.2019.05.189
Li, J.R., Ma, Y., McCarthy, M.C., Sculley, J., Yu, J., Jeong, H.K., Balbuena, P.B. and Zhou, H. (2011) Carbon Dioxide Capture-Related Gas Adsorption and Separation in Metal-Organic Frameworks. Coordination Chemistry Reviews , 255, 1791-1823. https://doi.org/10.1016/j.ccr.2011.02.012
Liu, Y., Wang, Z.U. and Zhou, H.C. (2012) Recent Advances in Carbon Dioxide Capture with Metal-Organic Frameworks. Greenhouse Gases: Science and Tec h nology , 2, 239-259. https://doi.org/10.1002/ghg.1296
Park, Y., Moon, D.K., Kim, Y.N., Ahn, H. and Lee, C.H. (2014) Adsorption Isotherms of CO 2 , CO, N 2 , CH 4 , Ar and H 2 on Activated Carbon and Zeolite LiX up to 1.0 MPa. Adsorption , 20, 631-647. https://doi.org/10.1007/s10450-014-9608-x
Rashidi, N.A. and Yusup, S. (2016) An Overview of Activated Carbons Utilization for the Post-Combustion Carbon Dioxide Capture. Journal of CO 2 Utilization , 13, 1-16. https://doi.org/10.1016/j.jcou.2015.11.002
Iturbe-García, J.L., Bonifacio, J., Granados, F. and López-Muñoz, B.E. (2019) Behavior of a Hydrotalcite Type Material Obtained from MgAl Alloy for CO 2 Adsorption. Applied Clay Science , 183, Article ID: 105296. https://doi.org/10.1016/j.clay.2019.105296