A Model of Physico-Mechanical Characterization of Sangaredi Bauxites and Related Rocks Taking into Account Their Litho-Genetic Type — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
A Model of Physico-Mechanical Characterization of Sangaredi Bauxites and Related Rocks Taking into Account Their Litho-Genetic Type
Department of Hydrology, University of Nzérékoré, Nzérékoré, Guinea
,
Guinea Bauxite Company, Kamsar, Guinea
1 Department of Hydrology, University of Nzérékoré, Nzérékoré, Guinea
The Sangarédi bauxite deposit in the Republic of Guinea contains several bauxite types depending on their litho-genetics. For rational and sustainable exploitation, determining the physical and mechanical properties of these different bauxite types is essential for mining companies. This paper presents a model for the physico-mechanical characterization of Sangarédi bauxites according to their litho-genetic type. Eight pits were drilled, and samples were collected from different layers at different depth intervals for each bauxite type. Physical and mechanical characterization tests were then carried out on 27 samples to determine the following parameters: water of absorption (%), compressive strength (kgf/cm 2 ) and dynamic tensile strength (kgf/cm 2 ). The effect of depth of sampling on these physico-mechanical parameters was evaluated. An average value of the parameters was made for each bauxite type. The results showed that the physico-mechanical characteristics of bauxites depend on the depth of sample collection, and the average value of the parameters constitutes the representative values of the bauxite type. Finally, a comparative study of the average value of the physico-mechanical parameters of the different bauxite types was carried out.
Ministry of Mines and Geology (2020) Mining Potential Resources. https://mines.gov.gn/
Sidiki, S. (2019) Bauxite Mining in the Boké Region (Western Guinea): Method Used and Impacts on Physical Environment. European Journal of Sustainable Development Research , 3, em0087. https://doi.org/10.29333/ejosdr/5735
Mouratidis, A. and Nikolidakis, P. (2020) Engineering Properties of Bauxite Residue. International Journal of Sustainable Development and Planning , 15, 319-325. https://doi.org/10.18280/ijsdp.150308
Zamanian, H., Ahmadnejad, F. and Zarasvandi, A. (2016) Mineralogical and Geochemical Investigations of the Mombi Bauxite Deposit, Zagros Mountains, Iran. Geochemistry , 76, 13-37. https://doi.org/10.1016/j.chemer.2015.10.001
Mamedov, V.I., Boufeev, Y.V. and Nikitine, Y.A. (2010) Geology of the Republic of Guinea. Ministry of Mines and Geology of the Republic of Guinea. Geoprospects LTD, University Moscow State Council.
Tom, A., Djonga, P.N.D., Tsamo, C., Valery, H.G., Azangueu, J. and Noukelag, S.K. (2022) Structural Characterization of Bauxite Red Mud to Utilization in Ceramic Wall/roofing Tile: Effect of Temperature on Mechanical Properties and Physic-Chemical Stability. Advances in Materials Physics and Chemistry , 12, 1-18. https://doi.org/10.4236/ampc.2022.121001
Wei, F., Xing, M., Li, S., Shan, J. and Guan, B. (2020) Physical and Mechanical Properties of Epoxy-bauxite Mortar of High-Friction Surface Treatment. Journal of Materials in Civil Engineering , 32, Article ID: 04020146. https://doi.org/10.1061/(asce)mt.1943-5533.0003201
Jiang, J., Su, J., Ou, X., Weng, M. and Lü, X. (2021) Study on the Physical and Mechanical Properties of Bauxite Residue by Laboratory and Field In - Situ Tests. Environmental Earth Sciences , 80, Article No. 377. https://doi.org/10.1007/s12665-021-09679-3
Parhi, B.R., Sahoo, S.K., Sahu, M., Bishoyi, B.D., Mishra, S.C., Bhoi, B., et al . (2017) Physico-Chemical Investigations of High Iron Bauxite for Application of Refractive and Ceramics. Metallurgical Research & Technology , 114, Article No. 307. https://doi.org/10.1051/metal/2017025
Michel, R., de Bilbao, E. and Poirier, J. (2016) Recycling Bauxite Waste for the Mineral Industry: Phase Transformations and Microstructure during Sintering. Waste and Biomass Valorization , 9, 1261-1271. https://doi.org/10.1007/s12649-016-9775-y
Liu, X., Wang, Q., Zhang, Q., Feng, Y. and Cai, S. (2012) Mineralogical Characteristics of the Superlarge Quaternary Bauxite Deposits in Jingxi and Debao Counties, Western Guangxi, China. Journal of Asian Earth Sciences , 52, 53-62. https://doi.org/10.1016/j.jseaes.2012.02.011
Barry, A.D., Cissé, M., Parfait, M.M. and Hallarou, M.M. (2021) Mineralogical and Geochemical Characteristics of the Sangarédi Bauxite Deposit, Boké Region, Republic of Guinea. Environmental and Earth Sciences Research Journal , 8, 11-22. https://doi.org/10.18280/eesrj.080102
Sidibe, M. and Yalcin, M.G. (2019) Petrography, Mineralogy, Geochemistry and Genesis of the Balaya Bauxite Deposits in Kindia Region, Maritime Guinea, West Africa. Journal of African Earth Sciences , 149, 348-366. https://doi.org/10.1016/j.jafrearsci.2018.08.017
Balde, M.Y., Djangang, C.N., Diallo, R.B., Blanchart, P. and Njopwouo, D. (2021) Physicochemical Characterisation for Potential Uses as Industrial Mineral of Bauxite from Débélé, Guinea. Journal of Materials Science and Chemical Engineering , 9, 9-22. https://doi.org/10.4236/msce.2021.93002
Aristide Zé, P., Tsamo, C. and Kamga, R. (2018) Characterization of Minim-Martap Bauxite and Its Extracted Alumina. Journal of Advanced Chemical Sciences , 4, 598-600. https://doi.org/10.30799/jacs.198.18040402
Diallo, A.K., Conte, M.S.M., Kaba, O.B., Soumah, A. and Camara, M. (2023) Petrological and Statistical Studies of the Limbiko Bauxite Deposit, Republic of Guinea. International Journal of Geosciences , 14, 351-376. https://doi.org/10.4236/ijg.2023.144020
Mamedov, V.I., Chausov, A.A. and Kanishev, A.I. (2011) Formation Stages of the Unique Sangaredi Bauxite-Bearing Group, Futa Jallon-Mandingo Province, West Africa. Geology of Ore Deposits , 53, 177-201. https://doi.org/10.1134/s1075701511030044
Zhang, R., Gong, E., Wang, G. and Peng, W. (2018) Mineralization Patterns and Conditions of Lateritic Gibbsite Bauxite in Guinea. Advances in Geoscience , 1, 38-48.
Beavogui, M.C., Balmaev, B.G., Kaba, O.B., Konaté, A.A. and Loginova, I.V. (2022) Bauxite Enrichment Process (Bayer Process): Bauxite Cases from Sangaredi (Guinea) and Sierra Leone. AIP Conference Proceedings , 2456, Article ID: 020003. https://doi.org/10.1063/5.0074812
Silva, F.A.N.G., Sampaio, J.A., Garrido, F.M.S. and Medeiros, M.E. (2011) Study on the Characterization of Marginal Bauxite from Pará/Brazil. In: Lindsay, S.J., Ed., Light Metals 2011, Springer, 13-18. https://doi.org/10.1007/978-3-319-48160-9_2
Forquin, P. and Erzar, B. (2009) Dynamic Fragmentation Process in Concrete under Impact and Spalling Tests. International Journal of Fracture , 163, 193-215. https://doi.org/10.1007/s10704-009-9419-3
Erzar, B. and Forquin, P. (2009) An Experimental Method to Determine the Tensile Strength of Concrete at High Rates of Strain. Experimental Mechanics , 50, 941-955. https://doi.org/10.1007/s11340-009-9284-z
Schuler, H., Mayrhofer, C. and Thoma, K. (2006) Spall Experiments for the Measurement of the Tensile Strength and Fracture Energy of Concrete at High Strain Rates. International Journal of Impact Engineering , 32, 1635-1650. https://doi.org/10.1016/j.ijimpeng.2005.01.010
Sebayang, M.D. and Putra, R.M. (2024) Analysis of Hardness, Crystal Structure, and Tensile Strength by Treatement with Variation of Welding Current Strengh Gtaw Material SS 316L. A RPN Journal of Engineering and Applied Sciences , 19, 541-545.
Novikov, S.A., Divnov, L.L. and Ivanov, A.G. (1966) Study of Rupture of Steel, Aluminum and Copper under Exploisif Loading. Fizika Metallov Metallovedeniye , 21, 23-32.