Research ArticleOpen AccessGoogle Scholar indexed
Effect Of Flyash On The Mechanical, Thermal, Dielectric,Rheological And Morphological Properties Of Filled Nylon 6
Plastics & Paints Division University Institute of Chemical Technology,Matunga, Mumbai-400 019, India.
Plastics & Paints Division University Institute of Chemical Technology,Matunga, Mumbai-400 019, India
- 1 Plastics & Paints Division University Institute of Chemical Technology,Matunga, Mumbai-400 019, India.
- 2 Plastics & Paints Division University Institute of Chemical Technology,Matunga, Mumbai-400 019, India
Journal of Minerals and Materials Characterization and Engineering·Volume 03 (2004)·Pages 65–72·Published 20 October 2004·DOI10.4236/jmmce.2004.32007
Copy link · social · email
Abstract
Fillers are used along with various commodities as well as engineering polymers to improve the properties of polymers. The performance of filled polymers is generally determined on the basis of the interface attraction of filler and polymers. Fillers of widely varying particle size and surface characteristics are responsive to the interfacial interactions with polymers. The present study deals with the effect of particle size and its concentration on the properties of flyash filled nylon 6.
Keywordsnylon 6flyashcompositesmechanical propertiesthermal propertiesdielectric propertiesrheological propertiesmorphological properties.
- Maiti, S.N; Lopez, B.H; J.Appl. Polym. Sci., 44,353(1992).
- "Nylon Plastics”; Kohan, M.I, Hanser: New York, 1973.
- "Modern plastics Encyclopedia Handbook”; Mc Graw Hill; New York, 1994.
- Harper, C.A,”Handbook of Plastics, Elastomers and Composites”; Mc Graw Hill, New York, 1996.
- Berins, M.L, S.P.I,”Plastics Engineering Handbook”; Chapman and Hall; London/Newyork, 1974.
- Nielsen, L.E, “Mechanical properties of Polymers and Composite”; Marcel Dekker; New York, 1974.
- Watari, T; Yamane, T; Moriyama, S; Torikai, T; Imaoka, Y; Suchiro, K and Tateyama H, Mater. Res. Bull, 32,719(1997).
- Cheng, L .P; Lin, D. J and Yang, K. C, J. Membrane. Sci., 172, 157(2000).
- Vaia, R.A; Price, G; Ruth, P.N; Nguyen, H.T and Lichtenhan, J, J. Appl. Clay. Sci, 15,67(1999).
- Gachter, R and Muller, H,”Plastics Additives Handbook”, Hanser Gardner Publication Inc, Cincinnati, 1993.
- Hess, K.M, Kunststoffe, 73,282(1993).
- Xing, Z, Fuel and Energy Abstr, 37,185(1996).
- Tanaka, H, J. Polym. Eng. Sci., 39,817(1999).
- Suryasarathi Bose and Mahanwar, P.A, Journal of Minerals & Materials Characterization & Engineering, 3(1), 23( 2004)
- Technical Bulletin, American Coal Ash Association, Alexandria, VA 22314-4553 (1999).
- Technical Bulletin, Southeastern Flyash Co., West Columbia, S.C. 29169.
- Jones, J. et al., SPE Annual Technical Conference, 41, 3594 (1995).
- Shut, J, Plastics Technology, 45(9), 42(1999).