Effectiveness Of Gravity Concentration For The Beneficiation Of Itakpe (Nigeria) Iron Ore Achieved Through Jigging Operation.
- 1 Department of Metallurgical and Materials Engineering,Federal University of Technology, Akure, Nigeria
- 2 School of Process and Materials Engineering,University of the Witwatersrand, Johannesburg, South Africa
Abstract
This study investigates the 1 effectiveness of gravity concentration for the beneficiation of Itakpe (Nigeria) iron ore achieved through jigging operations. Iron ore obtained from Itapke Iron Ore Mining Project, Kogi State, Nigeria which contains a very high amount of quartz as revealed by x-ray diffraction was crushed using the laboratory dodge crusher and ground in a laboratory ball mill. Particle size analysis was carried out over the range of +4750μm and -75μm in 12 different mesh sizes, and the ore was jigged in a Laboratory Denver Mineral Jig. The operating variables used to determine the recovery effectiveness of jigging include; particle size, dilution ratio and bedding thickness. Recovery of iron ore was assessed by determining the percentages of Fe in the underflow and overflow using the Atomic Absorption spectrometry (AAS) method. Optimum iron ore recovery of 71% was achieved when the jig was operated at medium stroke and speed, with a feed slurry of average dilution and at a particle size of 600μm.
- Adepoju, S. O. and Olaleye, B. M., (2001). Gravity concentration of silica sand from Itakpe iron-ore tailings by tabling operation. Nigerian Journal of Engineering Management. Vol. 2, No. 2, 51-55.
- Akande, J. M. and Olaleye, B. M., (2000). Recovery of Galena concentrate from lead- Zinc ore by jigging operation. Proceedings of the 18th Annual Conference of the Institute of Science and Technology. 28th Nov. – 1st Dec. 2000.
- Galvin, K.P., Pratten, S.J., Lambert, N., Callen, A.M., and Lui, J. (2002). Influence of a jigging action on the gravity separation achieved in a teetered bed separator. Minerals Engineering 15, 1199–1202.
- Gribble, C.D; (1988), Rutley’s element of mineralogy, 27th edition, London Pg. 235-6 and 427-9.
- Honaker, R.Q., Wang, D., Ho, K., (1996). Application of the Falcon concentrator for fine coal cleaning. Miner. Eng. 9 (11), 1143–1156.
- Mohanty, M. K., Honaker, R. Q., and Patwardhan, A. (2002). Altair jig: an in-plant evaluation for fine coal cleaning. Minerals Engineering 15, 157–166
- Parkinson, J.W., (1989). Centrifugal jig coal cleaning feasibility test results, Interim Report prepared for Electric Power Research Institute (EPRI), California and Empire State Electric Energy Research Corporation, NY.
- Pryor, E.J. (1965), Mineral processing, Elsevier Publishing Co. Ltd. Amsterdam – London – New York
- Wills B.A; (1989), Mineral Processing Technology, An introduction to the Practical aspect of ore treatment and mineral recovery. 3rd edition, Pergamon, New York.
- Yang, D. C., Bozzato, P., and Ferrara, G. (2003). Iron Ore Beneficiation with Packed Column Jig. Journal of Minerals & Materials Characterization & Engineering, Vol. 2, No.1, pp43-51, 2003.