Numerical Computations to Produce Cokeable Coal Blends at The Ajaokuta Steel Plant, Nigeria
- 1 DEPARTMENT OF MATERIALS SCIENCE AND ENGINEERING,OBAFEMI AWOLOWO UNIVERSITY, ILE-IFE, NIGERIA
- 2 DEPARTMENT OF MATHEMATICS,UNIVERSITY OF JOS,JOS, NIGERIA
Abstract
A mathematical model and its associated numerical search algorithm has been developed for routine coal blending to include local coals for cokemaking at the Nigerian blast furnace-based Ajaokuta Steel Plant. A typical binary blend proposed using the model includes 28.38% and 29.00% of the ash- laden Lafia and non-caking Okaba coals, respectively. The proposed blends satisfy basic chemical and mechanical strength requirements at the lowest cost per ton of coal. The blending calculations showed that only low ash, low sulphur, medium volatile and high vitrinite reflectance prime grade coals such as the UK Ogmore should be imported for blending with the ash-laden medium coking Lafia coal. When the proposed blends are successfully confirmed with bench and pilot scale carbonization tests, cokemaking at Ajaokuta will be conducted with substantial savings in foreign exchange.
- Poos, A., 1992, “Future requirements for blast furnace coke quality”. Cokemaking International , vol. 4, 29-30.
- Bujnowska, B., and Collin, G., 1992, “Coal tar pitch for improving coking properties of coal” , In Proc. 2 nd International cokemaking congress, London, 1992, pp. 142-146.
- Task Force on the maximum utilization of Nigerian coals at the Ajaokuta steel plant, 1987, Abuja, Nigeria.
- Raw Materials and products specification for Federal Government steel companies,1994, 1 st edn., Abuja, Nigeria.
- Moitra A.K., Banerjee, N.G., Shrinkhande K.Y., Sing, K. Raja, K, and Banerjee, S., 1972 Studies on coal carbonisation in India, 1 st edn, Central Fuel Research Institute Publication, Calculta.
- www.englishpeople.com.cn
- Adeleke A.O., 1997: Numerical Computations for coal blend optimization, M.Sc Mathematics Thesis, University of Jos, Nigeria.
- Skerl, G.E., 1988, “Automatic coal blend optimisation for cokemaking”. Iron and steel Engineer, USA, July edn, pp. 39-43.
- Ndaji, F.E., Marsh, H.A., 1987, “Laboratory Scale assessment of the utilization potential of sub-bituminous Nigerian coals as components of coking blends”, Fuel Processing Technology, Vol. 17, 131-143.
- Price, J.T. and Grandsen, J.F., 1987, “Improving coke quality with Canadian coals”, In Proc. 1 st International cokemaking congress, Essen, section E3, preprints vol.
- Panaitescu, C., 1991, Petrographia Carbunilor cocsurilor si producelor Carbonice,1 st edn., Editura Enciclopedia, Bucharest.
- Peskett, A.P., 1999 coal Indaba 99, Extract from final proceedings.
- Fatunla, S.O ,1993, Fundamentals of FORTRAN programming, 1 st edn., ADA+JANE Press,Benin
- Hudspeth, M.K., 1983, Introductory Geometry, 1 st edn., Addison Wesley, London
- Cross, M., and Moscardini, A.O., 1985, Learning the art of Mathematical modeling, 1 st edn., Elis Horwood Ltd, Sussex.
- Eckert, E.R.G. and Drake, R.M., 1972, Analysis of heat and mass transfer, international student edn., McGraw-Hill, London.
- Curtis, F.G., 1977, Applied Numerical Analysis, 2 nd edn., Addison-Wesley,Reading
- Buchtele, J., Rozkosny, I and sebestova, E., 1992, “Effect of the organic matter structure on the coking properties and on the texture formation of model cokes”,In Proc. 2 nd in international cokemaking congress, London, pp. 214 – 230.