Role of Temperature and Carbon Nanotube Reinforcement on Epoxy based Nanocomposites
- 1 Centre for Nanoscience & Nanotechnology(A joint initiative of IGCAR, Kalpakkam & Sathyabama University, Chennai) India-600119
Abstract
This paper presents the synthesis of epoxy based Multiwalled Carbon nanotubes (MWCNTs) reinforced composites by method of sonication. The variation in the nature of reinforcement (Aligned & Randomly oriented MWNTS) has resulted in the improvement of mechanical properties like flexural modulus, tensile strength and hardness. A small change in chemical treatment of the nanotubes has a great effect in the mechanical and morphological properties of nanocomposites due to effective load transfer mechanism and state of dispersion. The change in properties has been verified by optical microscopy and Scanning electron microscopy. Apart from that the prepared composites has been treated under different temperatures (like hot water, room temperature and liquid nitrogen temperature) and the change in mechanical as well as morphological nature has been verified by SEM of Fractographic surface this proved the elasticity and ductility of the composites.
- L. Cai, H. Tabata, and T. Kawai, 2000, “Self-assembled DNA networks and their electrical conductivity”, Appl. Phys. Lett., Vol. 77, pp 3105.
- M. C. Hersam, A. C. F. Hoole, S. J. O’Shea and M. E. Welland, 1998, “Potentiometry and repair of electrically stressed nanowires using atomic force microscopy” Appl. Phys. Lett., Vol.72, pp. 915.
- G. B. M. Fiege, A. Altes, R. Heiderhoff and L. J. Balk, 1999 “Quantitative thermal conductivity measurements with nanometre resolution” J. Physics, vol.D32, pp. 113.
- S. Gomes, N. Trannoy and P. Grossel, 1999 “DC thermal microscopy: study of the thermal exchange between a probe and a sample” Meas. Sci. Technology, vol.10, pp.805.
- O. Lourie and H. D. Wagner, 1998, Journal of Matt Research, vol.13, pp. 2418.
- E. W. Wong, P. E. Sheehan and C. M. Lieber, 1997, “Nanobeam mechanics: Elasticity, strength, and toughness of nanorods and nanotubes”, Science, vol. 277, pp. 1971.
- J. B. Donnet, Compos. Sci. Technol. 2003. Vol. 63, pp. 1085–1088.
- R. Bagheri and R. A. Pearson, 2000, Polymer, vol.41,pp. 269–276.
- T. Kawaguchi and R. A. Pearson, 2003, Polymer.vol.44, pp. 4239–4247.
- H. Mahfuz, A. Adnan, V. K. Rangari, S. Jeelani and B. Z. Jang, 2004, Compos. Part A:Appl. Sci. Manuf., vol. 35, pp. 519–527.
- M. F. Evora and A. Shukla, 2003, Mater Sci. Engg.A, vol.361, pp. 358–366
- R. Rodgers, H. Mahfuz, V. Rangari, N. Chisholm and S. Jeelani, 2005, Macromol.Mater. Engg, vol. 290, pp. 423–429.
- P. Farhana, Y.X. Zhou, V. Rangari and S. Jeelani, 2005 Mater. Sci. Eng. A, vol. 405 (1–2), pp. 246–253.
- Y. H. Liao, M. T. Olivier, Z. Y. Liang, C. Zhang and B. Wang, 2004, Mater. Sci. Eng.A, vol.385, pp. 175–181.
- C. G. Zhao, G. J. Hu, R. Justice, D. W. Schaefer, S. Zhang, M. S. Yang and C. C. Han, 2005, Polymer, vol. 46, pp. 5125–5132.
- S. Kim, T. W. Pechar, E. Marand, 2006, Desalination, vol.192, pp. 330–339.
- H. Cai, F. Y. Yan and Q. J. Xue, 2004, Mater. Sci. Eng. vol. 364, pp 94–100.
- T. Ogasawara, Y. Ishida, T. Ishikawa and R. Yokota, 2004, Compos. Part A: Appl.Sci. Manuf, vol.35, pp. 67–74.
- F.H. Gojny, J. Nastalczyk, Z. Roslaniec and K. Schulte, 2003, Chem. Phys. Lett., vol.370, pp 820–824.