Research ArticleOpen AccessGoogle Scholar indexed
Petroleum Coke Particle Size Effects on the Treatment of EAF Dust through Microwave Heating
Department of Materials Science and Engineering Michigan Technological University, MI 49931
Department of Materials Science and Engineering Michigan Technological University, MI 49931
Department of Materials Science and Engineering Michigan Technological University, MI 49931
Department of Materials Science and Engineering Michigan Technological University, MI 49931
- 1 Department of Materials Science and Engineering Michigan Technological University, MI 49931
- 2 Department of Materials Science and Engineering Michigan Technological University, MI 49931
- 3 Department of Materials Science and Engineering Michigan Technological University, MI 49931
- 4 Department of Materials Science and Engineering Michigan Technological University, MI 49931
Journal of Minerals and Materials Characterization and Engineering·Volume 08 (2009)·Pages 249–259·Published 20 April 2009·DOI10.4236/jmmce.2009.84022
Copy link · social · email
Abstract
EAF dusts were mixed with petroleum coke and irradiated together under microwave for a pyrometallurgical treatment. It was found that particle size of the reducing agent played an important role in affecting the reduction degree. Both zinc removal and metallization degree increased with the decreasing of the coke particle size. By changing both microwave time and carbon addition, optimal zinc removal at 99.23 % and metallization at 100 % can be achieved with 15 minutes microwave irradiation and 20 wt% carbon addition.
KeywordsEAF dustmicrowave processingzinc recoverymetal extraction
- Sofilic, T., Rastovcan-Mioc, A., Cerjan-Stefanovic, S., Novosel-Radovic, V., and Jenko, M.,2004, “Characterization of steel mill electric-arc furnace dust.” J. Hazard. Mater., Vol. 109,pp. 59-70.
- Hwang, J.Y., and Huang, X., Advanced Processing of Metals and Materials, Volume 5—New, Improved and Existing Technologies: Iron and Steel and Recycling and Waste Treatment, ed. F. Kongoli and R.G. Reddy (Warrendale, PA: TMS, 2006), “New Steel Production Technology with Microwave and Electric Arc Heating.” pp. 251–261.
- Clark, D. E., Folz, D. C., and West, J. K., 2000, “Processing materials with microwave energy.” Mater. Sci. Eng., A, Vol. 287, pp. 153-158.
- Shi, S., and Hwang, J. Y., 2003, “Microwave-assisted wet chemical synthesis: advantages, significance, and steps to industrialization.” J. Miner. Mater. Character. Eng., Vol. 2, pp. 101-110.
- Ghoreshy, M., and Pickles, C.A., 1995, “Microwave processing of electric arc furnace dust.” Electr. Furn. Conf. Proc., Vol. 52, pp. 187-196.
- Sun X., Hwang, J. Y., and Huang X., 2008, “The microwave processing of electric arc furnace dust.” JOM, Vol. 60, pp. 35-39.
- Xu, Z., Hwang, J. Y., Greenlund, R., Huang, X., Luo, J., and Anschuetz, S., 2003, “Quantitative determination of metallic iron content in steel-making slag.” J. Miner. Mater. Character. Eng., Vol. 2, pp. 65-70.
- Thompson, K., Booske, J. H., Cooper, R. F., Gianchandani, Y. B., and Ge, S., 2001, “Temperature measurement in microwave-heated silicon wafers.” Ceram. Trans., Vol. 111, pp. 391-398.
- Pert, E., Carmel, et al., 2001, “Temperature Measurements during Microwave Processing: The Significance of Thermocouple Effects.” J. Am. Ceram. Soc., Vol. 84, pp. 1981-1986.
- Chen, T. T., Dutrizac, J. E., and Owens, D. R., 1998, “Mineralogical characterization of EAF dusts from plain carbon steel and stainless steel operations.” Waste Process. Recycl. III, pp. 511-525.
- Rogers A., and Alexander, J., 1920, Industrial Chemistry, 3 rd ed., D. Van Nostrand, New York.
- Saidi, A., and Azari, K., 2005, “Carbothermic reduction of zinc oxide concentrate by microwave.” J. Mater. Sci. Technol., Vol. 21, pp. 724-728.