Challenges of Producing Quality Construction Steel Bars in West Africa:Case Study of Nigeria Steel Industry
- 1 Department of Metallurgical and Materials Engineering,University of Lagos, Nigeria 23401
- 2 Department of Metallurgical and Materials Engineering,University of Lagos, Nigeria 23401
- 3 Department of Metallurgical and Materials Engineering,University of Lagos, Nigeria 23401
- 4 Department of Metallurgical and Materials Engineering,University of Lagos, Nigeria 23401
Abstract
The production of quality high-yield reinforcing steel bars continues to receive attention from researchers across the globe due to its importance and contribution to a country GDP. In most of the developing countries, particularly Nigeria, empirical studies have shown that bars produced through conventional rolling requires appropriate modification of its chemical composition in order to obtain the desired mechanical properties such as strength. However, the high cost factor involved in composition adjustment makes such approach unattractive. Rather, the application of the combination of systems of controlled rolling and controlled cooling proves to be the best option. This system however, requires some variations in processing parameters to suit individual plant production peculiarities. In this paper attempt is made to study the production challenges and opportunities the steel millers are facing in Nigeria. Previous works in this area are also reviewed with a view to charting the way forward. Experimental studies and process monitoring were carried out at some designated rolling mills in Nigeria.
- Goto, Y., 1971, “Cracks formed in Concrete around Deformed Tension Bars.” J. Am Concr. Instit Proc., Vol. 68, pp. 244-251.
- Yu Lakhtin, 1988, Engineering physical metallurgy and heat treatment, Mir publishers, Moscow, Russia, pp. 71-78.
- ASTM: Annual Book of ASTM Standards, Part 4 (Standards for Deformed Steel Bar – A615-72, A616-72, A617-72, Philadelphia, American Society for Testing and Materials 1973, pp.684-99.
- Llwellyn, D. T., 1992, “Low-carbon structural steels.” steels, metallurgy and applications, pp. 64-119.
- Nikolau, J. et al, 2003, “Microstructure and Mechanical Properties after heating of reinforcing 500MPa Weldable Steels.” Journal of Construction and Building Materials, Vol. 18, pp. 243-254.
- Vlad, C. M., 1986, “A comparison between the TEMPRIMAL and TEMPCORE processes for high strength rebars”, 27th Mechanical Working and Steel Processing Conference Proceedings, Iron and Steel Society, Vol.23, pp. 908-912.
- Tarsuro, et al, 2001, Microstructure and Mechanical Properties of hot rolled bars for machine use, pp.241-256.
- Oelmann, L.A. et al, 1983, The structure, properties and heat treatment of metals, Pitman Books, Great Britain, pp. 54-57.
- British Standards Specification: BS 4449, 1988, Carbon Steel Bars for the Reinforcement of Concrete, pp. 4-8.
- Sahajwalla, et al, 2006, “Influence of carbonaceous materials in slag-foaming behavior ,during EAF steel making”, Journal of Iron and Steel Technology, Vol. 3, No. 2, pp. 54-63.
- Owens, G. W. and Knowles, P. R., 1992, Steel designer’s manual, Blackwell Scientific Publications.
- Ghosh, P. K. et al, 2007, “The Development of a New Approach to Deoxidation of Molten Steel”, Iron and Steel Technology, pp. 96-104.
- Richard, S., 2001, “Method for controlling the temperature of steel on a continuous hot rolling mill”, Metallurgical Transaction B, Vol. 22, pp. 121-128.
- Obikwelu, D. C. N., 1987, “Metallurgical Considerations in the Optimization of Mechanical Properties of rolled products”, Seminar paper presented at the Metallurgical and Research Department, Delta Steel Company, Aladja, Warri, Nigeria.
- Young Kil, 1988, “Quest for competitive clean steel”, Steel Technology International, pp.118-121.
- Breedijk, T., 1976, “Weldable Bar for used in Reinforcing Concrete”, Patents Citation USPTO.