Studies on Weldability of Powder-Processed Fe-0.35P-0.15C Alloy Using Gas Tungsten Arc Welding Process
- 1 Indian Institute of Technology, Roorkee- 247667, Uttarakhand, India
- 2 Indian Institute of Technology, Roorkee- 247667, Uttarakhand, India
- 3 Indian Institute of Technology, Roorkee- 247667, Uttarakhand, India
- 4 Indian Institute of Technology, Roorkee- 247667, Uttarakhand, India
Abstract
The objective of this study was to investigate the weldability of an iron-based powder metal alloy (Fe-P-C) using the gas tungsten arc welding process (GTAW) with two different filler metals. Optical microscopy revealed that for the Fe-P-C alloys, the fusion-welded zone was free of porosity and cracks. The thickness of the slab was 4 mm. The heat affected zone did not show excessive hardness. The SEM image of the fracture specimen showed elongated dimples. X-Ray mapping confirmed the absence of Fe3P. EPMA was used to determine the ability of carbon in preventing the segregation of P to the grain boundaries. Tensile tests showed that the failures of the specimens occurred always in the base metal with tensile strength slightly superior to the value of unwelded samples. As a result, this investigation showed the feasibility of joining ironbased powder metal alloys by the GTAW process, especially while welding the Fe-P-C alloy.
- N. Chawla, X. Deng, Mater. Sci. Eng. Vol. 390 (2005) 98.
- K.V. Sudhakar, P. Sampathkumaran, E.S. Dwarakadasa, Wear Vol. 242, (2000) 207.
- J.A. Hamill, Weld. J. Vol. 2, (1993) 37-45.
- K. Jayabharat, M. Ashafaq, P. Venugopal, D.R.G., Achar, Mater. Sci. Eng. Vol. 454-455 (2007) 114.
- A. Kurt, H. Ates, A. Durgutlu, K. Karacif, Weld. J. Vol. 83 (12), (2004) 34.
- F. Thummler, R. Oberacker, Introduction to Powder Metallurgy. Institute of Materials, London 1993.
- E.O. Correa, S.C. Costa, J.N. Santos, J. Mater. Process. Technol. Vol. 209 (2009) 3937.
- J.F. Lancaster, Metallurgy of Welding, 4th ed. George Allen & Unwin, London (1987).
- J.C. Lippold, D.J. Kotecki, Welding Metallurgy and Weldability of Stainless Steel, 5th ed. John Willey & Sons, USA (2005).
- ASM Handbook, Metallography and Microstructures, Vol. 9 (1999).
- A.N. Briskman, Aut. Weld. Vol. 32 (7) (1979)40.
- O Kubaschewski, Iron—Binary phase diagrams (Berlin: Springer Verlag), (1982) 84
- A. Bramley, F. W. Haywood, A. T. Coopers and J. T. Watts, Trans. Faraday Soc., Vol. 31 (1935)707
- J. W. Stewart, J. A. Charles and E. R. Wallach, Mater. Sci.Technol. Vol. 16(3) (2000) 275.
- R. Balasubramaniam and Gouthama, Bull. Mater. Sci., Vol. 26, No. 5, (2003) 483.
- P. Lindskog, J. Tengzelius and S. A. Kvist, Modern Developments in Powder Metallurgy, Vol. 10, Ferrous and Nonferrous P/M Materials, (1977) 97.
- H.Erhart and H. J. Grabke, Met. Sci. Vol. 15 issue 9 (1981) 401.
- R. L. Sands and C. R. Shakespeare, Powder Metallurgy – Practice and applications, George Newnes Ltd. UK, (1966) 112
- ASM Handbook, Heat Treating, Vol. 4 (1991).
- E.O. Correa, S.C. Costa, J.N. Santos, J. Mater. Process. Technol. Vol. J. Mater. Process. Technol. Vol. 198 (2008) 323.