Hot Rolling and Ageing Effect on the Pseudoelasticity Behaviour of Ti-Rich TiNi Shape Memory Alloy
- 1 Department of Mechanical Engineering, National Institute of Technology, Srinivasanagar,Surathkal, Karnataka, India
- 2 Department of Mechanical Engineering, National Institute of Technology, Srinivasanagar,Surathkal, Karnataka, India
- 3 Department of Studies in Mechanical Engineering, University B D T College of Engineering, Davanagere-577 004 India
- 4 Department of Studies in I & P Engineering, University B D T College of Engineering,Davanagere-577 004 India
- 5 Department of Studies in Mechanical Engineering, University B D T College of Engineering, Davanagere-577 004 India
Abstract
This paper presents the findings of an experimental study of how ageing temperature affects the pseudoelasticity (PE) and its phases of Shape Memory Alloy (SMA). These have been examined by means of tensile testing machine and X-ray diffraction (XRD). By increasing the ageing temperature (constant ageing time) from 350oC to 550oC critical stress for martensite formation and psuedo-elastic elongation increased. However, specimen aged at 650oC showed a decrease in the critical stress for martensite formation and psuedo-elastic elongation. After second and third sequence of loading and unloading, the critical stress shifted towards higher side was observed. The XRD measurement revealed that phases present in the matrix drastically changes with ageing temperatures. Transformation was taking place in two-way transformation, i.e., during heating martensite (B 19' ) transformed to austenite (B 2 ) while cooling the austenite (B 2 ) transformed back to martensite (B 19' ) .
- Birman, V., 1997, ‘‘Review of mechanics of shape memory alloy structures.’’ Appl.Mech.Review, Vol. 50, pp. 629-645.
- Otsuka, K. and Wayman, C.M. , Editors, 1998, Shape Memory Materials, Cambridge University Press, Cambridge.
- Funakubo, H., (ed.), translated by Kennedy, J.B., 1984, Shape Memory Alloys, Gordon and Breach, New York.
- Liang, C., Rogers, C.A. , 1993, ‘‘Design of Shape Memory Alloy Springs With Applications in Vibration Control.’’ J. Vibration Acoustics, vol. 115, pp. 132-135.
- Nishida, M. , Honma, T. , 1984, ‘‘ All-round shape memory effect in Ni-rich TiNi alloys generated by constrained aging.’’ Scripta Metallurgica, Vol. 18, Issue 11, pp. 1293-1298.
- Wayman, C.M. , 1989, In: Proc. MRS Int.Meet. Adv. Materials (Rich, E.E. and Wilson, C.H., Eds.) 9, pp. 63.
- Miyazaki, S., Igo, Y., Otsuka, K., 1986, ‘‘Effect of thermal cycling on the transformation temperatures of Ti---Ni alloys.’’ Acta Metallurgica, Vol.34, Issue 10, pp. 2045-2051
- Stachowiak, G.B. , Mccornick, P.G. , 1988, ‘‘Shape memory behaviour associated with the R and martensitic transformations in a NiTi alloy.’’ Acta Metallurgica, Vol. 36, Issue 2, pp.291-297
- Cai, W. , Musakami, Y. , Otasuka, K. , 1999, ‘‘Study of R-phase transformation in a Ti–50.7at%Ni alloy by in-situ transmission electron microscopy observations.’’ Materials Science and Engineering A, Vol. 273-275, pp. 186-189
- Tang, W. , Sandstrom, R. , 1993, ‘‘ Analysis of the influence of cycling on TiNi shape memory alloy properties.’’ Materials & Design, Vol.14, Issue 2, pp. 103-113.
- Pelosin, V. , Riviere, A. , 1998, ‘‘ Effect of thermal cycling on the R-phase and martensitic transformations in a Ti-rich NiTi alloy.’’ Metallurgical Transactions A, Vol. 29, Issue 4, pp.1175-1180
- Mohamed, H.A. , Washburn, J. , 1977, ‘‘ Deformation behaviour and shape memory effect of near equi-atomic NiTi alloy.’’ Jr of Material Science ,Vol. 12, Issue 3, pp. 469-480.
- Yinong Liu, Galvin, S.P. , 1997, ‘‘ Criteria for pseudoelasticity in near-equiatomic NiTi shape memory alloys.’’ Acta Materialia, Vol. 45, Issue 11, pp. 4431-4439.
- Yinong Liu, Mccormick, P.G., 1989, ‘‘Influence of Heat Treatment on the Mechanical Behaviour of a NiTi Alloy.’’ ISIJ International, Vol.29 , Issue 5, pp.417-422.
- Hsu, T.Y., 1980, ‘‘Thermodynamics of martensitic transformation β(Y)→ε.’’ Acta Meatll. Sinica,vol. 16,pp. 430.