Performance of Nickel-Coated Manganese Steel in High-Chloride Low-Sulphate Seawater Environments
- 1 Department of Materials Science & Engineering Obafemi Awolowo University Ile-Ife
- 2 Department of Materials Science & Engineering Obafemi Awolowo University Ile-Ife
- 3 Department of Materials Science & Engineering Obafemi Awolowo University Ile-Ife
- 4 National Agency for Science & Engineering Infrastructure (NASENI), Abuja
- 5 Department of Materials Science & Engineering Obafemi Awolowo University Ile-Ife
Abstract
This work investigated the service performance of nickel-coated manganese steel in both normal high-chloride (clean) and low-sulphate high-chloride (polluted) seawater environments (typical offshore oil and gas production environments). Structural manganese steels coated with nickel together with the control were tested for corrosion characteristics using the weight loss method. It was found that the nickel coat was able to resist corrosion overtime via spontaneous formation of passive oxide films at ambient temperatures. Analysis of resulting corrosion rates underscored the viability of nickel coating at inhibiting severe corrosion owing to the harsh chloride- and sulphate-containing seawater typical of the oil and gas production environments.
- Schremp, F. W. (1982). Corrosion Prevention for Off-shore Platforms. Paper SPE 9986, presented at the SPE International Petroleum Exhibition and Technical Symposium, Beijing, China, March 18-26.
- Maxwell, S. (1986). Assessment of Sulphide Control Risks in Off-shore Systems by Biological Monitoring, SPE Production Engineering 1, no. 5, pp 363-368.
- Tsujino, B., and Oki, T. (1989) Galvanic Mild-Steel Corrosion in Methanol and Corrosiononitoring. Corrosion Engineering, Vol. 38, No.8, pp. 433-440.
- Alvarado, R. M., and Arnold, C. G. (1986). Computerized Corrosion Data Monitoring in a Chemical Process Plant, Paper 69, Corrosion 86, NACE, Houston.
- Asperger, R. G., and Hewitt, P. G (1986) Real-Time Electronic Monitoring of a Pitted and Leaking Gas Gathering Pipeline. Materials Performance, Vol. 25, No.9, pp. 47-57.
- Christensen, C., Maahn, E., Juhl, C., and Hagerup, O. (1988) Evaluation of Inhibitors for Sour Crude Oil Transmission Pipe Lines. Paper 198, Corrosion 88, NACE, Houston.
- Britton, C. F. (1980) Monitoring Internal Corrosion in Offshore Installation. Corro. Prevo Cont., Vol. 27, No.2, pp. 10-12.
- Jasinski, R., and Efird, K. D. (1988) Electrochemical Corrosion Probe for High Resistivity Hydrocarbon-Water Mixtures. Corrosion, Vol. 44, No.9, pp. 658-663.
- Jaske, C. E., Beavers, J. A. and Thompson, N. G. (1995) Improving Plant Reliability through Corrosion Monitoring. Fourth International Conference on Process Plant Reliability. Houston Texas. Organized by Gulf Publishing Company and Hydrocarbon Processing.
- Talbot, D. E. J. and Talbot, J. D. R. (1998) Corrosion Science and Technology. CRC Press LLC, Florida.