Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review — Oak Academic Publishing
Research ArticleOpen AccessGoogle Scholar indexed
Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review
Research Scholar, National Institute of Technology, Warangal, (A.P), India & Department of Mechanical Engineering, S B M Jain College of Engineering, Jakkasandra (P),Kanakapura (T), Ramanagara (D)-562 112, Karnataka, India.
,
Department of Mechanical Engineering, National Institute of Technology, Warangal, (A.P),India.
,
Department of Mechanical Engineering, National Institute of Technology, Warangal, (A.P),India.
1 Research Scholar, National Institute of Technology, Warangal, (A.P), India & Department of Mechanical Engineering, S B M Jain College of Engineering, Jakkasandra (P),Kanakapura (T), Ramanagara (D)-562 112, Karnataka, India.
2 Department of Mechanical Engineering, National Institute of Technology, Warangal, (A.P),India.
3 Department of Mechanical Engineering, National Institute of Technology, Warangal, (A.P),India.
Aluminum Metal Matrix Composites (MMCs) sought over other conventional materials in the field of aerospace, automotive and marine applications owing to their excellent improved properties. These materials are of much interest to the researchers from few decades. These composites initially replaced Cast Iron and Bronze alloys but owing to their poor wear and seizure resistance, they were subjected to many experiments and the wear behavior of these composites were explored to a maximum extent and were reported by number of research scholars for the past 25 years. In this paper an attempt has been made to consolidate some of the aspects of mechanical and wear behavior of Al-MMCs and the prediction of the Mechanical and Tribological properties of Aluminum MMCs.
R. Dwivedi, “Performance of MMC Rotors in Dynamometer Testing”, SAE Technical Paper Series, 940848, Warrendale, PA, USA.
B. Neitzel, M. Barth, M. Matic, “Weight Reduction of Discs Brake Systems with the Utilization of New Aluminum Material”, SAE Technical Paper Series, 940335, Warrendale, PA, USA.
T. Zeuner, P. Stojanov, P.R. Saham, H. Ruppert, A. Engels, “Developing trends in disc brake technology for rail application”, Mater. Sci. Technol. 14 (1998) 857–863.
R. Dwivedi, “Development of Advanced Reinforced Aluminum Brake Rotors”, SAE Technical Paper Series, 950264, Warrendale, PA, USA, 1995, 8 p.
T. Miyajima, Y. Iwai; “Effects of reinforcements on sliding wear behavior of aluminum matrix composites”, Wear 255 (2003) 606–616.
Mortensen A, Wong T. Metall Trans A; Vol 21 A: pp 2257–63.
Y.M. Pan, M.E. Fine, H.S. Chang, “Wear mechanism of aluminium based meal matrix composite under rolling and sliding contraction in technology of composite materials”, P.K. Rothagi, P.J.B. Ian, C.S. Yune (Eds.), ASM International, 1990, pp. 93–101.
S.V. Prasad, P.K. Rothagi, “Tribological properties of Al alloy particle composite”, J. Metall. 39 (1987) 22.
Kassim S. Al-Rubaie, Humberto N. Yoshimura, Jose Daniel Biasoli de Mello, “Twobody abrasive wear of Al–SiC composites”, Wear 233–235 (1999) 444–454.
L. Ceschini, C. Bosi, A. Casagrande, G.L. Garagnani, “Effect of thermal treatment and recycling on the tribological behaviour of an AlSiMg–SiCp composite”, Wear 251 (2001) 1377–1385.
M.D. Bermudez, G. Martinez-Nicolas, F.J. Carrion, I. Martinez-Mateo, J.A. Rodriguez, E.J. Herrera, “Dry and lubricated wear resistance of mechanically-alloyed aluminum-base sintered composites”, Wear 248 (2001) 178–186.
H. Y. Sohn, S. PalDey, “Synthesis of ultrafine particles and thin films of Ni4Mo by the vapor-phase hydrogen coreduction of the constituent metal chlorides”, Materials Science and Engineering A, Vol- 247, Issues 1-2, (1998), Pages 165-172.
D.M. Aylor, Metals Handbook V-13, vol. 9, ASM Metals Park, OH, 1982, pp. 859–863.
N. Wang, Z. Wang, G.C. Weatherly, “Formation of Magnesium Aluminate (spinel) in Cast SiC Particulate-Reinforced Al(A356) Metal Matrix Composites”, Metallurgical and Materials Transactions A, 23 (1992) 1423–1430.
H. Ribes, M. Suéry, G. L’Espérance, J.G. Legoux, “Microscopic examination of the interface region in 6061-Al/SiC composites reinforced with as-received and oxidized SiC particles”, Metallurgical and Materials Transactions A, 21 (1990) 2489–2496.
Sanjay Kumar Thakur, Brij Kumar Dhindaw, “The influence of interfacial characteristics between SiCp and Mg/Al metal matrix on wear, coefficient of friction and microhardness”, Wear 247 (2001) 191–201.
Daoud A., M.T. Abou-Elkhair, P. Rohatgi, “Wear and friction behavior of near eutectic Al–Si+ZrO 2 or WC Particle Composites”, Compo., Sci., and Tech., 64 (2004) 1029–1040.
V.V. Bhanu Prasad, K.S. Prasad, A.K Kurovilla, A.B. Pandey, B.V.R.Bhat and Y.R Mahajan, “Composite strengthening in 6061 and Al-4 Mg alloys”, Journal of Mat., Sci., 26 (1991) 460.
Y. Wu and E J. Lavemia, Prec. Conf. Advancements in Synthesis and Processes, Toronto, Oct 20-22, 1992, Society for Advancement of Material and Process Engineering, 1992, M692.
R. Tiwari, H. Herman, S. Sampath, B. Gudmundsson, “Plasma spray consolidation of high temperature composites”, Materials Science and Engineering: A, Volume 144, Issues 1-2, 1 October 1991, pages 127-13.
Sug Won Kim, Ui Jong Lee, Sang Won Han, Dong Keun Kim, K. Ogi, “Heat treatment and wear characteristics of Al/SiCp composites fabricated by duplex process”, Composites: Part B 34 (2003) 737–745.
B.K. Prasad, “Investigation into sliding wear performance of zinc-based alloy reinforced with SiC particles in dry and lubricated conditions”, Wear 262 (2007) 262–273.
M.R. Rosenberger, C.E. Schvezov, E. Forlerer, “Wear of different aluminum matrix composites under conditions that generate a mechanically mixed layer”, Wear 259 (2005) 590–601.
L.J. Yang “A test methodology for the determination of wear coefficient”, Wear 259 (2005) 1453–1461.
L.J. Yang, “Wear coefficient equation for aluminium-based matrix composites against steel disc”, Wear 255 (2003) 579–592.
A.R. Riahi, A.T. Alpas, “The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites”, Wear 251 (2001) 1396–1407.
Szu Ying Yu, Hitoshi Ishii, Keiichiro Tohgo, Young Tae Cho, Dongfeng Diao, “Temperature dependence of sliding wear behavior in SiC whisker or SiC particulate reinforced 6061 aluminum alloy composite”, Wear 213 (1997) 21-28.
S. Wilson, A.T. Alpas “Wear mechanism maps for metal matrix composites”, Wear 212 (1997) 41-49.
S.C. Sharma, “The sliding wear behavior of Al6061–garnet particulate composites”, Wear 249 (2001) 1036–1045.
I.M. Hutching, “Wear by particulates”, Chemical Engineering Science, Volume 42, Issue 4, 1987, Pages 869-878.
F. M. Husking, F. Folgar Portillo, R. Wunderlin, R. Mehrabian, “Comlpsites of aluminium alloys: fabrication and wear behaviour”, J. Mater. Sci. 17 (1982) 477-498.
Debdas Roy, Bikramjit Basu, Amitava Basu Mallick, “Tribological properties of Tialuminide reinforced Al-based in situ metal matrix composite”, Intermetallics 13 (2005) 733–740.
Uan JY, Chen LH, Lui TS, “On the extrusion microstructural evolution of Al–Al 3 Ni in situ composite”, Acta Materialia, Volume 49, Issue 2, 2001, Pages 313-320.
Rajnesh Tyagi, “Synthesis and tribological characterization of in situ cast Al–TiC composites”, Wear 259 (2005) 569–576.
P.H. Shipway, A.R. Kennedy, A.J. Wilkes, “Sliding wear behaviour of aluminium-based metal matrix composites produced by a novel liquid route”, Wear 216 (1998) 160 –171.
S.K. Chaudhury, A.K. Singh, C.S. Sivaramakrishnan, S.C. Panigrahi, “Wear and friction behavior of spray formed and stir cast l–2Mg–11TiO 2 composites”, Wear 258 (2005) 759–767.
Abdulhaqq A. Hamid, P.K. Ghosh, S.C. Jain, Subrata Ray, “The influence of porosity and particles content on dry sliding wear of cast in situ Al(Ti)–Al 2 O 3 (TiO 2 ) composite”, Wear, Volume 265, Issues 1-2, 25 June 2008, Pages 14-26.
Abdulhaqq A. Hamid, P.K. Ghosh, S.C. Jain, S. Ray, “Influence of particle content and porosity on the wear behaviour of cast in situ Al(Mn)–Al 2 O 3 (MnO 2 ) composite”, Wear 260 (2006) 368–378.
G.J.Howell, A.Ball, “Dry sliding wear of particulate-reinforced aluminium alloys against automobile friction materials”, Wear 181-183 (1995) 379-390.
A. Vencl, I. Bobi, Z. Mi?skovi, “Effect of thixocasting and heat treatment on the tribological properties of hypoeutectic Al–Si alloy”, Wear 264 (2008) 616-623.
J.M. Wu, Z.Z. Li, “Contributions of the particulate reinforcement to dry sliding wear resistance of rapidly solidified Al-Ti alloys”, Wear 244 (2000) 147–153.
R.L. Deuis, C. Subramaniun, J.M. Yellup, “Abrasive wear of aluminium composites—a review”, Wear 201 (1996) 132–144.
B.K. Prasad, O.P. Modi, A.K. Jha, “The effects of alumina fibres on the sliding wear of a cast aluminium alloy”, Tribo., Inter., Volume 27, Issue 3, June 1994, Pages 153-158.
Alpas AT, Zhang J., “Effect of SiC particulate reinforcement on the dry sliding wear of aluminum–silicon alloys (A356)”, Wear 1992; 155:83–104.
Kulkarni MD, Robi PS, Prasad RC, Ramakrishnan P., “Deformation and fracture behavior of cast and extruded 7075Al–SiCp composites at room and elevated temperatures”, Mater Trans, JIM 1996; 37:223–9.
Kim CK, Park SY, “A study on the fabrication and mechanical properties of SiC fiberaluminum alloy composites”, J Korean Inst Met Mater 1984; 22:185–92.
C. Subramanian, “Some considerations towards the design of a wear resistant aluminium alloy”, Wear 155 (1992) 193–205.
M. Chen, T. Perry, A.T. Alpas, “Ultra-mild wear in eutectic Al–Si alloys”, Wear 263 (2007) 552–561.
S. Sawla, S. Das, “Combined effect of reinforcement and heat treatment on the two body abrasive wear of al-alloy and aluminum particle composites”, Wear 257 (2004) 555–561.
W.Q.Song, P.Krauklis, A.P.Mouritz, S.Bandyopadhyay, “The effect of thermal ageing on the abrasive wear behavior of age-hardening 2014 Al/SiC and 6061 Al/SiC composites”, Wear 185 (1995) 125-130.
S. Das, D.P. Mondal, S. Sawla, N. Ramakrishnan, “Synergic effect of reinforcement and heat treatment on the two body abrasive wear of an Al–Si alloy under varying loads and abrasive sizes”, Wear 264 (2008) 47–59.
Wang .A and H.J. Rack, “Abrasive wear of silicon carbide particulate and whisker reinforced 7091 aluminium matrix composites”, Wear, 146 (1991) 337.
Callister Jr. W. D., “Materials Science and Engineering: an introduction”, New York, Wiley, year 1999.
James M. Whitney and Roy L. Mc Cullough, "Micromechanical materials modeling", in vol. 2 of Delware composite design Encyclopedia, Trchnomic Publishing Company.
L.E. Nielson and R.F. Landel, “Mechanical properties of polymers and composites”, Marcel Dekker, Inc. New York, year 1994.
Shao-Yun Fu, Guanshui Xu and Yiu-Wing Mai, “On the elastic modulus of hybrid particle/short-fiber/polymer composites”, Composites: Part B33: 291-299, 2002.
Soon-Chul Kwon, Tadahrru Adachi, Wakako Araki and Akihiko Yamaji, “Thermoviscoelastic properties of silica particulate-reinforced epoxy composites: Considered in terms of particle packing model”, Acta Materialia 54 (2006) 3369-3374.
Manwar Hussain, Atsushi Nakahira, Shigehiro Nishijima and Koichi Niihara, “Effects of coupling agents on the mechanical properties improvement of the TiO 2 reinforced epoxy system”, Materials Letters 26:299-303, 1996.
Ma ZY, Tjong SC. In situ ceramic particle-reinforced aluminum matrix composites fabricated by reaction pressing in the TiO 2 (Ti)–Al–B (B 2 O 3/sub>) systems. Metall. Mater. Trans. 1997; 28(A):1931–42.
Rang Chen, Akira lwabuchi, Tomoharu Shimizu, Hyung Seop Shin, Hidenobu Mifune, “The sliding wear resistance behavior of NiAI and SiC particles reinforced aluminum alloy matrix composites”, Wear 213 (1997) 175-184.
Yoshiro Iwai, Hidetomo Yoneda, Tomomi Honda, “Sliding wear behavior of SiC whisker-reinforced aluminum composite”, Wear 181-183 (1995) 594-602.
Heguo Zhu., Hengzhi Wang, Liangqi Ge, “Wear properties of the composites fabricated by exothermic dispersion reaction synthesis in an Al–TiO 2 –B 2 O 3/sub> system”, Wear, Volume 264, Issues 11-12, 10 May 2008, Pages 967-972.
A.Martin, M.A.Martinez, J.LLorca, “Wear of SiC-reinforced Al-matrix composites in the temperature range 20-200℃”, Wear 193 (1996) 169-179.
H. Sekine, R. Chen, “A combined microstructure strengthening analysis of SiCprAl metal matrix composites”, Composite 6 (1995) 183–188.
R. Chen, G.D. Zhang, “Casting defects and properties of cast A356 alloy reinforced with SiC particulates”, Compos. Sci. Technol. 4 (1993) 511–556.
P.M. Singh, J.J. Lewandowski, “Effects of heat treatment and reinforcement size on reinforcement fracture during tension testing of a SiCp discontinuously reinforced aluminum alloy”, Metall. Trans. A 24 (1993) 2531–2543.
Rong Chen , Akira Iwabuchi, Tomoharu Shimizu, “The effect of a T6 heat treatment on the fretting wear of a SiC particle-reinforced A356 aluminum alloy matrix composite”, Wear 238 (2000) 110–119.
J. LLorca, “Failure micro-mechanisms in particulate-reinforced metal matrix composites”, J. Phys. IV, 3 (1993) 1793-1798.
J.R. Gomes, A. Ramalho, M.C. Gaspar, S.F. Carvalho, “Reciprocating wear tests of Al–Si/SiCp composites: A study of the effect of stroke length”, Wear 259 (2005) 545–552.
H.C. How, T.N. Baker, “Characterization of sliding friction-induced subsurface deformation of Saffil-reinforced AA6061 composites”, Wear 232 (1999) 106–115.
Peter J, Blau, “Fifty years of research on the wear of metals”, Tribology International Vol. 30, No. 5, pp. 321-331, 1997.
U. Sanchez-Santana, C. Rubio-Gonzalez, G. Gomez-Rosas, J.L. Ocana, C. Molpeceres, J. Porro, M. Morales, “Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing”, Wear 260 (2006) 847–854.
A.P.Sannino, H.J.Rack, “Dry sliding wear of discontinuously reinforced aluminium composites: review and discussion”, Wear 189 (1995) 1-19.
R.K. Uyyuru., M.K. Surappa, S. Brusethaug, “Effect of reinforcement volume fraction and size distribution on the tribological behavior of Al-composite/brake pad tribocouple”, Wear 260 (2006) 1248–1255.
A.T. Alpas, J. Zhang, “Effect of microstructure (particulate size and volume fraction) and counterface material on the sliding wear resistance of particulate-reinforced aluminum matrix composites”, Metall. Mater. Trans. A 25 (1994) 969–983.
M.K. Surappa, S.V. Prasad, P.K. Rohatgi, “Wear and abrasion of cast Al–alumina particle composites”, Wear 77 (1982) 295–302.
A. Wang, H.J. Rack, “Dry sliding wear in 2124 Al–SiCw/17-4 PH stainless steel systems”, Wear 147 (1991) 355–374.
M. Bai, Q. Xue, X. Wang, Y. Wan, W. Liu, “Wear mechanism of SiC whisker-reinforced 2024 al-alloy matrix composites in oscillating sliding wear tests”, Wear 185 (1995) 197–202.
A. Alahelisten, F. Bergman, M. Olsson, S. Hogmark, “On the wear of aluminium and magnesium metal matrix composites”, Wear 165 (1993) 221–226.
J.Q. Jiang, R.-S. Tan, A.-B. Ma, “Dry sliding wear behaviour of Al 2 O 3 –Al composites produced by centrifugal force infiltration”, Mater. Sci. Technol. 12 (1996) 483–488.
P.N. Bindumadhavan, H.K. Wah, O. Prabhakar, “Dual particle size (DPS) composites: effect on wear and mechanical properties of particulate matrix composites”, Wear 248 (2001) 112–120.
D.P. Mondal, S. Das, A.K. Jha, A.H. Yegneswaran, “Abrasive wear of Al alloy–Al 2 O 3 particle composite: a study on the combined effect of load and size of abrasive”, Wear 223 (1998) 131–138.
S. Kumar, V. Balasubramanian, “Developing a mathematical model to evaluate wear rate of AA7075/SiCp powder metallurgy composites”, Wear, Volume 264, Issues 11-12, 10 May 2008, Pages 1026-1034.
A. Martin, J. Rodriguez, J. Llorca, “Temperature effects on the wear behavior of particulate reinforced Al-based composites”, Wear 225–229 (1999) 615–620.
Joel Hemanth, “Tribological behavior of cryogenically treated B 4 C p /Al–12% Si composites”, Wear 258 (2005) 1732–1744.
R.K. Uyyuru, M.K. Surappa, S. Brusethaug, “Tribological behavior of Al–Si–SiC p composites/automobile brake pad system under dry sliding conditions”, Tribology International 40 (2007) 365–373.
Gibson R, Clegg AJ, Das AA, “Wear of cast Al-Si alloys containing graphite”, Wear, Volume 95, Issue 2, 16 April 1984, Pages 193-198.
J. Zhang, A.T. Alpas, “Delamination wear in ductile materials containing second phase particles”, Materials Science and Engineering: A, Volume 160, Issue 1, 15 January 1993, Pages 25-35.
Y. Wang, W.M. Rainforth, H. Jones, M. Lieblich, “Dry wear behaviour and its relation to microstructure of novel 6092 aluminium alloy–Ni3Al powder metallurgy composite”, Wear 251 (2001) 1421–1432.
Ferhat Gul, Mehmet Acilar, “Effect of the reinforcement volume fraction on the dry sliding wear behaviour of Al–10Si/SiC p composites produced by vacuum infiltration technique”, Composites Science and Technology 64 (2004) 1959–1970.
C. Perrin, W.M. Rainforth, “The effect of alumina fibre reinforcement on the wear of an Al-4.3% Cu alloy”, Wear 181–183 (1995) 312.
G. Ranganath, S.C. Sharma, M. Krishna, “Dry sliding wear of garnet reinforced zinc/aluminium metal matrix composites”, Wear 251 (2001) 1408–1413.
Q.D. Qin, Y.G. Zhao, W. Zhou, “Dry sliding wear behavior of Mg2Si/Al composites against automobile friction material”, Wear, Volume 264, Issues 7-8, 15 March 2008, Pages 654-661.
K.M. Shorowordi, A.S.M.A. Haseeb, “Velocity effects on the wear, friction and tribochemistry of aluminum MMC sliding against phenolic brake pad”, Wear 256 (2004) 1176–1181.
J.K.M. Kwok, S.C. Lim, “High-speed tribological properties of some Al/SiC p composites. I. Frictional and wear-rate characteristics”, Composite Science and Technology 59 (1999) 55–63.
P. Poza, M.A. Garrido, A. Rico, J. Rodriguez, “Dry sliding wear behaviour of aluminium–lithium alloys reinforced with SiC particles”, Wear 262 (2007) 292–300.
P. Vissutipitukul, T. Aizawa, “Short communication; Wear of plasma-nitrided aluminum alloys”, Wear 259 (2005) 482–489.
J. Zhang, A.T. Alpas, “Transition between mild and severe wear in aluminum alloys”, Acta Materia 45 (2) (1997) 513–528.
L.J. Yang, “The effect of nominal specimen contact area on the wear coefficient of A6061 aluminium matrix composite reinforced with alumina particles”, Wear 263 (2007) 939-948.
E. Hornbogen, “The role of fracture toughness in the wear of metals”, Wear 33 (1975) 251–259.
S. Das, “The influence of matrix microstructure and particle reinforcement on the twobody abrasive wear of cast Al–Si-alloy composites”, J. Mater. Sci. Lett. 16 (1997) 1757–1760.
S. Das, S. Gupta, D.P. Mondal, B.K. Prasad, “Influence of load and abrasive size on the two body abrasive wear of Al–SiC composites”, Aluminum Trans. 2 (2000) 27–36.
S. Das, D.P. Mondal, G. Dixit, “Mechanical properties of pressure die cast Al hard part composite”, Metall. Mater. Trans. 33A (2001) 633–642.
G.Y. Lee, C.K.H. Dharan, R.O. Ritchie, “A physically based abrasive wear model for composite materials”, Wear 252 (3–4) (2002) 322–331.
A.A. Torrance, “The effect of grit size and asperity blunting on abrasive wear”, Wear 253 (2002) 813–819.
H.L. Lee, W.H. Lu, S. Chan, “Abrasive wear of powder metallurgy Al alloy 6061–SiC particle composites”, Wear 159 (1992) 223–231.
L. Ceschini, G.S. Daehn h, G.L. Garagnani, C. Martini, “Friction and wear behavior of C 4 AI203/AI composites under dry sliding conditions”, Wear 216 (1998) 229-238.
Feng Tang, Xiaoling Wu, Shirong Gec, Jichun Ye, Hua Zhu, Masuo Hagiwara, Julie M. Schoenung, “Dry sliding friction and wear properties of B4C particulate-reinforced Al-5083 matrix composites”, Wear, Volume 264, Issues 7-8, 15 March 2008, Pages 555-561.
S. Muthukumarasamy, S. Seshan, “Structure and properties of fibre reinforced zn-27% al alloy based cast MMCs”, Composites 26 (1995) 387–393.
A.K. Prasada Rao, K. Das, B.S. Murty, M. Chakraborty, “Microstructure and the wear mechanism of grain-refined aluminum during dry sliding against steel disc”, Wear, Volume 264, Issues 7-8, 15 March 2008, Pages 638-647.
A.P.sannino, H.J.Rack, “Tribological investigation of 2009 Al-20 vol. % SiC p / 17-4 PH Part I: Composite performance”, Wear 197 (1996) 151-159.
K.H. Zum Gahr, Met. Prog, 116 (1979), 46.
V. Jayaram, S.K. Biswas, “Wear of Al 2 O 3 –SiC [Al, Si] melt oxidized ceramic composites”, Wear 225–229 (1999) 1322–1326.
M.Y. Chen, M.C. Breslin, “Friction behavior of co-continuous alumina/aluminum composites with and without SiC reinforcement”, Wear 249 (2002) 868–876.
M.H. Korkut, “Microstructure and wear behavior of Al2024\SiFe and Al2024\SiFe\Al 2 O 3 composites”, Tribology International 36 (2003) 169–180.
J.C. Walker, W.M. Rainforth, H. Jones, “Lubricated sliding wear behaviour of aluminium alloy composites”, Wear 259 (2005) 577–589.
A. Mandal, M. Chakraborty, B.S. Murty, “Effect of TiB2 particles on sliding wear behaviour of Al–4Cu alloy”, Wear 262 (2007) 160–166.
I.A. Ibrahim, F.A. Mohamed, E.J. Lavernia, “Particulate reinforced metal matrix composites—a review”, J. Mater. Sci. 26 (1991) 1137–1156.
C.S. Ramesh, R. Keshavamurthy, B.H. Channabasappa, Abrar Ahmed, “Microstructure and mechanical properties of Ni–P coated Si3N4 reinforced Al6061 composites”, Materials Science and Engineering: A, Volume 502, Issues 1-2, 25 February 2009, Pages 99-106.
D.J. Lloyd, H. Lagace, A. McLeod, P. L. Morris, “Microstructural aspects of aluminiumsilicon carbide particulate composites produced by a casting method”, Materials Science and Engineering: A, Volume 107, January 1989, Pages 73-80.
T.F. Stephenson, J.A.E. Bell, in: R.A.L. Drew, H. Mostaghaci (Eds.), “Development and Applications of Ceramics and New Metal Alloys”, CIM, Montreal, 1993, p. 51.
Z. Ma, L. Ya’nan, Y. Lu, J. Bi, Trans. Nonferrous Met. Soc. 8 (1998) 556–561.
S. Das, S.V. Prasad, T.R. Ramachandran, “Tribology of Al---Si alloy-graphite composites: triboinduced graphite films and the role of silicon morphology”, Materials Science and Engineering: A, 138 (1991) 123.
S. Das, S.V. Prasad, “Microstructure and wear of cast (Al-Si alloy)-graphite composites”, Wear, 133 (1989) 173.
P.K. Rohatgi, Y. Liu, T.L. Barr, Metall. Trans. A 22 (1991) 1435.
W. Ames, A.T. Alpas, Metall. Mater. Trans. A 26 (1995) 85.
S.V. Prasad and P. K. Rohatgi, “Tribological properties of Al alloy particle composites”, J. Met., 39(11) (1987) 22-26.
P.K. Rohatgi, S. Ray, Y. Liu, “Tribological properties of metal matrix graphite particle composites”, Int. Mater. Rev. 37 (1992), pp. 129–149.
O.P. Modi, R.P. Yadav, B.K. Prasad, A.K. Jha, S. Das, A.H. Yegneswaran, “Three-body abrasion of a cast zinc–aluminium alloy: influence of Al 2 O 3 dispersoid and abrasive medium”, Wear 249 (2001) 792–799.
M.J. Ghazali, W.M. Rainforth , H. Jones, “Dry sliding wear behaviour of some wrought, rapidly solidified powder metallurgy aluminium alloys”, Wear 259 (2005) 490–500.
R. Antoniou, D.W. Borland, Mater. Sci. Eng. A 93 (1987) 57–72.
A.Ravikiran, M.K.Surappa, “Effect of Sliding speed on wear behavior of A356 Al-30% SiCP MMC”, Wear 206 (1997) 33-38.
X.Y. Li, K.N. Tandon, “Microstructural characterization of mechanically mixed layer and wear debris in sliding wear of an Al alloy and an Al based composite”, Wear 245 (2000) 148–161.
B. Venkataraman, G. Sundararajan, “Correlation between the characteristics of mechanically mixed layer and wear behaviour of aluminium, Al-7075 alloy and Al- MMCs”, Wear 245 (2000) 22–38.
N. Saka, J.J. Pamies-Teixeira, N.P. Suh, “Wear of two-phase metals”, Wear 44 (1977) 77–86.
R. Tyagi, S.K. Nath, S. Ray, “Effect of martensite content on friction and oxidative wear behavior of 0.42 Pct carbon dual-phase steel”, Metallurgical and Materials Transactions A 33A (2002) 3479–3488.
X.Y. Li, K.N. Tandon, “Mechanical mixing induced by sliding wear of an Al–Si alloy against M2 steel”, Wear 225–229 (1999) 640–648.
S.K. Biswas, “Some mechanisms of tribofilm formation in metal/metal and ceramic/metal sliding interactions”, Wear 245 (2000) 178–189.
L. Las, J.M. Rodrigez-Ibabe, “Wear behaviour of eutectic and hypereutectic Al–Si–Cu–Mg casting alloys tested against a composite brake pad”, Mater. Sci. Eng. A 363 (2003) 193–200.
J.M. Gomez de Salazar, M. I. Barrena, “Influence of heat treatments on the wear behaviour of an AA6092/SiC25p composite”, Wear 256 (2004) 286–293.
M. Singh, O.P. Modi, Rupa Dasgupta, A.K. Jha, “High stress abrasive wear behaviour of aluminium alloy–granite particle composite”, Wear 233–235 (1999) 455–461.
Veeresh Kumar.G.B, C.S.P.Rao, Bhagyashekar.M.S, Selvaraj.N “Mechanical and Tribological Behaviour of Al6061-SiCp Composites”, proceedings of the International Conference ICMM-2008, 18th–20th December 2008, pp 1-8.
Hulya Kacar Durmus, Erdogan Ozkaya and Cevdet Meric, “The use of neural networks for the prediction of wear loss and surface roughness of AA 6351 Al alloy”, Materials & Design, Vol 27, Issue 2, Pgs 156-159, 2006.
Y. Sahin, “The prediction of wear resistance model for the metal matrix composites”, Wear 258 (2005) 1717–1722.
C.S. Ramesh, A.R. Anwar Khan, N. Ravikumar, P. Savanprabhu, “Prediction of wear coefficient of Al6061–TiO2 composites”, Wear 259 (2005) 602–608.
Lin Ye, Ye Lu, Zhongqing Su, Guang Meng, “Functionalized composite structures for new generation airframes: a review”, Composites Science and Technology 65 (2005) 1436–1446.
Z. Zhang, K. Friedrich, “Artificial neural networks applied to polymer composites: a review”, Composites Science and Technology 63 (2003) 2029–2044.
Rasit Koker, Necat Altinkok and Adem Demir, “Neural network based prediction of mechanical properties of particulate reinforced metal matrix composites using various training algorithms”, Materials & Design, Vol 28, pp 616-627, 2007.
Zhenyu Jiang, Zhong Zhang and Klaus Friedrich, “Prediction on wear properties of polymer composites with artificial neural networks”, Composites Science and Technology, Volume 67, Issue 2, Pages 168-176, February 2007.
Holger R. Maier, Graeme C. Dandy, “The effect of internal parameters and geometry on the performance of back-propagation neural networks: an empirical study, Environmental Modelling & Software, Volume 13, Pages 193 – 209, (1998).
H. S. Rao and A. Mukherjee, “Artificial neural networks for predicting the macromechanical behaviour of ceramic-matrix composites”, Computational Materials Science, Volume 5, Issue 4, Pages 307-322, April 1996.
P. Cavaliere, “Flow curve prediction of an Al-MMC under hot working conditions using neural networks”, Computational Materials Science, Vol 38, Issue 4, Pg 722-726, Feb 2007.
Adel Mahamood Hassan, Abdalla Alrashdan, Mohammed T. Hayajneh, Ahmad Turki Mayyas, “Prediction of density, porosity and hardness in aluminum–copper-based composite materials using ANN”, Journal of Materials Processing Technology, 209, pp 894–899, 2009.
Necat Altinkok and Rasit Koker, “Modeling of the prediction of tensile and density properties in particle reinforced metal matrix composites by using neural networks”, Materials & Design, Volume 27, Issue 8, Pages 625-631, 2006.
C. Z. Huang, L. Zhang, L. He, J. Sun, B. Fang, B. Zou, Z. Q. Li and X. Ai, “A study on the prediction of the mechanical properties of a ceramic tool based on an artificial neural network, Journal of Materials Processing Technology, Volume 129 (2002), pp 399-402.
G. Partheepan, D.K. Sehgal,R.K. Pandey, “Fracture toughness evaluation using miniature specimen test and neural network”, Computational Materials Science, 44, pp 523–530, 2008.
Abeesh C. Basheer, Uday A. Dabade, Suhas S. Joshi, V.V. Bhanuprasad and V.M. Gadre “Modeling of surface roughness in precision machining of metal matrix composites using ANN”, Journal of Materials Processing Technology, Volume 197, Issues 1-3, pp 439-444, Feb 2008.
G. Ganesan, K. Raghukandan, R. Karthikeyan and B.C. Pai, “Development of processing map for 6061 Al/15% SiCp through neural networks”, Journal of Materials Processing Technology, Volume 166, Issue 3, pp 423-429, August 2005.
Sumantra Mandal, P.V. Sivaprasad, S. Venugopal, K.P.N. Murthy, “Artificial neural network modeling to evaluate and predict the deformation behavior of stainless steel type AISI 304L during hot torsion”, Applied Soft Computing, 9, pp 237–244, 2009.
Mehmet Sirac Ozerdem, Sedat Kolukisa, “ANN approach to predict the mechanical properties of Cu–Sn–Pb–Zn–Ni cast alloys”, Materials and Design, 30, 764–769, 2009.
Jiahua Zhu, Yijun Shi, Xin Feng, Huaiyuan Wang, Xiaohua Lu, “Prediction on tribological properties of carbon fiber and TiO2 synergistic reinforced polytetrafluoroethylene composites with artificial neural networks”, Materials and Design, 30, pp 1042–1049, 2009.
K.Genel, S.C Kurnaz, M. Durman “Modeling of tribological properties of alumina fiber reinforced zinc-Al composites using Artificial Neural Network”, Material Science and engineering A, Volume 363, pages 203-210, December 2003.
Raimundo Carlos Silverio Freire Jr., Adriao Duarte Doria Neto, Eve Maria Freire de Aquino, “Use of modular networks in the building of constant life diagrams”, International Journal of Fatigue 29 (2007) 389–396.
F.S.Rashed, T.S.Mahmoud, “Prediction of wear behaviour of A356/SiCp MMCs using neural networks”, Tribology International 42 (2009) 642–648.
Veeresh Kumar.G.B, C.S.P.Rao, Selvaraj.N, Bhagyashekar.M.S., “Prediction of Wear of Al6061-SiC Metal Matrix Composites using Artificial Neural Networks”, International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS) Volume 2, Issue 1, pp. 498-505, October 2009 – March 2010.
Arjula Suresh, A.P. Harsha, M.K. Ghosh, “Solid particle erosion studies on polyphenylene sulfide composites and prediction on erosion data using artificial neural networks”, Wear 266, pp 184–193, 2009.
Abderrezak Bezazi, S. Gareth Pierce, Keith Worden, El Hadi Harkati, “Fatigue life prediction of sandwich composite materials under flexural tests using a Bayesian trained artificial neural network”, International Journal of Fatigue, Vol 29, pp 738–747, 2007.
M.R. Dashtbayazi, A. Shokuhfar and A. Simchi, “ANN modeling of mechanical alloying process for synthesizing of metal matrix nanocomposite powders”, Materials Science and Engineering: A, Vol 466, Pg 274-283, 25 Sept 2007.