Thermo-Mechanical Processing of Iron-Phosphorous-Carbon Alloys
- 1 Department of Metallurgical Engineering, National Institute of Technology, Srinagar,Hazratbal, Srinagar, J & K– 190006, India
- 2 Department of Metallurgical and Materials Engineering, Indian Institute of Technology,Roorkee, Roorkee, Uttarakhand -247667, India
Abstract
Phosphorous is widely considered as an impurity in steels. Consequently, its role as an important alloying element in iron could never be established. The present paper deals with the exploitation of phosphorous as a useful alloying element in iron in conjunction with carbon by way of improved thermo-mechanical processing leading to a tough steel equivalent to high strength low alloy steels. It was observed that phosphorous is pushed towards ferrite grains by carbon which in turn forms pearlite along ferrite grains. Suitable adjustment in the amounts of carbon and phosphorous yields an attractive set of mechanical properties after appropriate processing. Typical chemistry and processing combinations yields UTS: 700 MPa and % El: 25% Area under the stress-strain curve: 60 Joules.
- Allen N. P. in ‘Iron and its dilute solid solutions’, 1963, New York, Willey Interscience 271-308.
- Balasubramaniam, R., Corros. Sci., 2000 42 2103–2129.
- Balasubramaniam R 2002 Delhi iron pillar—New insights (Shimla: Indian Institute of Advanced Study)
- Clarke B. D. and McIvor I. D., Ironmaking & Steelmaking, 1989, 16, 335-344.
- Dieter G. E.,’ Mechanical Metallurgy’, 3 rd edn, 1988, London, McGraw-Hill.
- Goodway M. and Fisher R.M., Hist. Metall., 1988, 22, 21-23
- Hopkins B E and Tipler H R 1958 J. Iron Steel Inst. 188, 218
- Muchnik S. V., Phosphorus-containing alloys, in: Encyclopedia of Inorganic Materials [in Russian], Vol. 2, USE, Kiev 1977, 666-667.
- Percy J., ‘Metallurgy- iron and steel’, 1864, London, John Murray.
- Rostoker W. and Bronson B., ‘Pre industrial iron-its technology and ethnology’, Archaeomaterials Monograph No.1, 1990, Philadelphia, PA, University of Pennsylvania.
- Stewart J W, Charles J A and Wallach E R 2000 Mater. Sci. Technol. 16, 275
- Suzuki S, Obata M, Abiko K and Kimura H 1985 Trans. ISIJ 25, 62
- Tikkanen M.H., ‘The application of sintering theory in practice,’ Physics of sintering- Theory and Practice, Edited by M.M.Risti.., 1973, 441-453.
- Tylecote R. E., ‘The prehistory of metallurgy in the British Isles’, 1986, London, the Institute of Metals.
- Wiemer K. ‘Early British iron edged tools- a metallurgical survey’ Ph D thesis, University of Cambridge, 1993
- Wranglen G Corrosion Science, 1970, 10, 761- 770.