Quality of Some Nigerian Coals as Blending Stock in Metallurgical Coke Production
- 1 Department of Chemistry, Kaduna State University, P.M.B 2339, Kaduna, Nigeria
- 2 Chemistry Programme, Abubakar Tafawa Balewa University, PMB 248, Bauchi, Nigeria
Abstract
Two Nigerian coals, Lafia-Obi and Chikila were blended in the mass ratio of 70:30 with imported American and Polish coking coals. Proximate analysis, free swelling index, Ruhr dilatometer and Gieseler plastometer were used in assessing the coking qualities of both the single coals and the blends. The results show that the blends are lower in moisture and ash contents; higher in volatile matter and fixed carbon than the single Nigerian coals. The rheological parameters revealed superiority in thermo-plastic properties of the blends over the unblended local coals. Lafia-Obi/Foreign coals blends possess lower ash and better rheological properties compared to Chikila/Foreign coal composites which have high ash and poor rheological properties. These together suggest that amongst the two Nigerian coals, Lafia-Obi is superior for blending with the foreign ones in metallurgical coke production.
- Ikoku, C., 1984, “Chemistry in the National Economy.” Fourth Dimension, Enugu, p. 100
- Ikoku, C., 1984, Coal in the energy midst of Nigeria, In: Nigerian coal: a resource for energy and investments, pp. 25 – 29, (Okolo, H. C. and Mkpadi M. C., Eds.), RMRDC, Abuja.
- Nigerian Coal Corporation Information Manual, 1997, Seventh OAU/AEC Trade Fair
- Obaje, N. G., 1997, “Petrographic evaluation of the coking potential of the Cretaceous Obi/Lafia coal deposits in the Benue trough of Nigeria.” Z. angew Geol., Vol. 43, No. 4
- Ward, C. R., 2002, Coal geology, In: Encyclopedia of Physical Science and Technology, pp. 45-76. Academic Press, New York
- Taylor, G. H., Teichmuller, T. M., Davis, A., Diessel, R. L. and Robert, P., 1998, Organic Petrology, Borntrager, Berlin, pp. 519-615
- Walker, R., Mastalerz, M., and Padgett, P., 2001, “Quality of selected coal seams from Indiana: Implications for carbonization.” Int. J. of Coal Geol., Vol. 47, pp. 277-288
- Cornells, J. K., Mohammed, A. K. and Dacid, A. C., 2003, Medium volatile coal, the solution for coke blends with reduced low-volatile coal content, AISE Steel Technology, pp. 42-48
- Valia, H. S., and Mastalerz, M., 2004, Indiana Coals and the steel Industry, Indiana Geol. Survey Special Report, 64
- Diez, M. A., Alvarez, R. and Barriocanal, C., 2002, “Coal for metallurgical coke production: Prediction of coke quality and future requirements for coke making.” Int. J. Coal Geol., Vol. 50, pp. 289-412
- Gransden, J, Price, J., 1997, Geological Fieldwork, British Columbia Geological Survey Branch, paper 1998-1
- Aderonpe, W. I. A., 1996, Coal Blending: application to Nigerian coals for the iron and steel industries, In: Nigerian Coal: A resource for energy and investments, pp. 125 – 137, (Okolo, H. C. and Mkpadi, M. C., Eds), RMRDC, Abuja
- Afonja, A. A., 1996, Production of metallurgical coke from non–coking coals, In: , In: Nigerian Coal: A resource for energy and investments, pp. 89 – 105, (Okolo, H. C. and Mkpadi, M. C., Eds), RMRDC, Abuja
- American Society for Testing and Materials. Annual Book of ASTM Standards, 1992, Section 5: Petroleum Products, Lubricants and Fossil Fuels. 5.05: Gaseous Fuels; Coal and Coke
- International Energy Agency (IEA)/Organization for Energy Co-operation and Development (OECD), 2002, Coal in the energy supply of India, Paris, p. 28