Effect of Heat Treatment on Mechanical Properties and Microstructure of NST 37-2 Steel
- 1 Department of Mechanical Engineering, University of Ibadan, P.M.B 1, Ibadan, Nigeria
- 2 Department of Mechanical Engineering, University of Ibadan, P.M.B 1, Ibadan, Nigeria
- 3 Department of Mechanical Engineering, University of Ibadan, P.M.B 1, Ibadan, Nigeria
Abstract
Engineering materials, mostly steel, are heat treated under controlled sequence of heating and cooling to alter their physical and mechanical properties to meet desired engineering applications. In this study, the effect of heat treatment (annealing, normalising, hardening, and tempering) on the microstructure and some selected mechanical properties of NST 37-2 steel were studied. Sample of steel was purchased from local market and the spectrometry analysis was carried out. The steel samples were heat treated in an electric furnace at different temperature levels and holding times; and then cooled in different media. The mechanical properties (tensile yield strength, ultimate tensile strength, Young’s modulus, percentage reduction, percentage elongation, toughness and hardness) of the treated and untreated samples were determined using standard methods and the microstructure of the samples was examined using metallographic microscope equipped with camera. Results showed that the mechanical properties of NST 37-2 steel can be changed and improved by various heat treatments for a particular application. It was also found that the annealed samples with mainly ferrite structure gave the lowest tensile strength and hardness value and highest ductility and toughness value while hardened sample which comprise martensite gave the highest tensile strength and hardness value and lowest ductility and toughness value.
- Kempester M.H.A., 1984, Materials for Engineers, 3rd Edition. Hoodder and Stonghton.
- Raymond A., Higgins B., 1985, Properties of Engineering Materials. Hoodder and Stonghton.
- Dell, K.A., 1989, Metallurgy Theory and Practical Textbook. American Technical Society, Chicago, pp. 351-353.
- John, V.B., 1980, Introduction to Engineering Materials, 2nd Edition. Macmillan Publishing Company Ltd., pp 321-324.
- Alawode, A.J., 2002, Effects of Cold Work and Stress Relief Annealing Cycle on the Mechanical Properties and Residual Stresses of Cold-Drawn Mild Steel Rod. M. Eng Thesis, Mechanical Engineering Department, University of Ilorin, Nigeria.
- Nigerian Society of Engineers (NSE). 2001, Professional Development Board Codes and Ethics Committee. Report On Workshop On Evaluation of Engineering Standards in Nigeria.
- ASM International 1991, ASM Handbook: Heat Treatment, Vol. 4, American Society for Metals Park, Ohio.
- ASTM E18. 2008, Standard Test Method for Rockwell Hardness of Metallic Materials, American Society of Testing and Materials.
- ASTM E23. 2008, Standard Test Method for Izod Bar Impact Testing of Metallic Materials, American Society of Testing and Materials.
- ASTM E8. 2008, Standard Test Method for Tension Testing of Metallic Materials, American Society of Testing and Materials.
- Jokhio, M.H., 1991, Effect of Retained Austenite on Abrasive Wear Resistance of Carburised SAE 8822H Steel. Thesis in Manufacturing Engineering, Mehran University of Engineering and Technology, Jamshoro.
- Charkrabarti, A.K. and Das, P.P. 1974. “Kinectics of Second stage graphitization in Quenched Alloy Spheroidal Iron.” Journal of British Foundryman, Vol. 67, pp. 330-334.
- Charkrabarti, A.K. and Das, P.P. 1988, “Tempering Characteristic of Quenched Alloy Spheroid Graphite Cast Iron.” Journal of British Foundryman, Vol. 67, pp. 330-334.