Hot corrosion and erosion are recognized as serious problems in coal based power generation plants in India. The coal used in Indian power stations has large amounts of ash (about 50%) which contain abrasive mineral species such as hard quartz (up to 15%) which increase the erosion propensity of coal. Hot corrosion and erosion in boilers and related components are responsible for huge losses, both direct and indirect, in power generation. An understanding of these problems and thus to develop suitable protective system is essential for maximizing the utilization of such components. These problems can be prevented by either changing the material or altering the environment or by separating the component surface from the environment. Corrosion prevention by the use of coatings for separating material from the environment is gaining importance in surface engineering.
A.S. Khanna, “Introduction to high temperature oxidation and corrosion”, ASM International, ISBN 0-87170-762-4, SAN: 204-7586, 2002, pp 1-322.
P.V. Ananthapadmanabhan , K.P. Sreekumar, K.V. Muraleedharan, N. Venkatramani, “Plasma-sprayed composite coatings for high temperature applications”, Surface & Coating Technology, Vol. 49, 1991, pp 62-66.
John Stringer, “High temperature corrosion problems in coal based power plant and possible solutions”, Proceedings International conference on corrosion ‘CONCORN’ 97, Dcember 3-6, Mumbai, India, pp 13-23.
K. Natesan, “Corrosion performance of materials in coal-fired power plants”, Proceedings International conference on corrosion ‘CONCORN’ 97, Dcember 3-6, Mumbai, India, pp 24-35.
P.R.Krishnamoorthy, S. Seetharamu and P.Sampathkumaran, “Influence of the mass flux and impact angle of the abrasive on the erosion resistance of materials used in pulverized fuel bends and other components in thermal power stations”, Wear, Vol. 165, 1993, pp 151-157.
B.A. Landry, J.D. Hummel, H.W. Nelson et al, “A review of available information on corrosion and deposition in coal and oil fired boilers and gas turbines”, ASME research committee, Pergamon press, The American society of mechanical engineers, New York, pp 1-197.
Robert A. Rapp, “Chemistry and electrochemistry of hot corrosion of metals”, materials science and engineering, 87, 1987, 319-327.
Kevin J. Stein, Brian S. Schorr, Arnold R. Marder, “Erosion of thermal spray MCr-Cr C cermet coatings”, Wear, Vol. 224, 1999, pp 153-159.
V. Higuera Hidalgo, J. Belzunce Verela, A. Carriles Menendez, S. Poveda Martinez, “High temperature erosion wear of flame and plasma sprayed nickel-chromium coatings under similated coal-fired boiler atmospheres”, Wear, VOl.247, 2001, pp 214-222
R. Viswanathan, “ Damage mechanism and life assessment of high-temperature components”, ASM International, 1989, ISBN: 0-87170-358-0, pp 1-483.
R. A. Rapp and K. S. Goto, Symposium on Fused Salts, J. Braunstein and J. R. Selman (Eds.), The Electrochemical Society, Pennington, N. J., (1981),pp.159.
J.J Wells , F. Wigley, D.J Foster, W.R Livingston, W.h Gibb, J. Williamson, “The nature of mineral matter in a coal and the effects on erosive and abrasive behavior”, Fuel Processing Technolgy, Vol.86(2005),pp. 535-550.
Buta Singh Sidhu and S. Prakash, “Evaluation of the behavior of shrouded plasma spray coatings in the platen superheater of coal-fired boilers”, Metallurgical & Materials Transactions, Vol. 37A, 2006,pp 1927.
T.S. Sidhu, R.D. Agarwal, S. Prakash, “Hot corrosion of some super alloys and role of high-velocity oxy-fuel spray coatings”, Surface Coatings & Technology, Vol. 198, 2005,pp 441-446.
J. L He, K.C. Chen, C.C Chen, A.Leyland, and A. Matthews, “Cyclic Oxidation Resistance of Ni-Al Alloy Coatings Deposited on Steel by a Cathodic Arc Plasma Process,” Surf. Coat. Technol.,Vol. 135, 2001, pp. 158-65.
A.S. Khana, S. K. Jha, “Degradation of materials under hot corrosionconditions”, Trans. Indian Inst. Met. , 51 (5), 1998, 279-90.
Robert A. Rapp, “Hot corrosion of materials: a fluxing mechanisms”, Corrosion Science ,44, 2002, 209-221.
Vikas Chawla, S. Prakash, D. Puri, Buta Singh, Manoj Singla, “Hot corrosion-a review”, Global Conference on Production & Industrial Engineering, March 2007, organized by Dr. B.R. Ambedkar Institute of Technology, Jalandhar (India).
N. Eliaz, G. Shemesh, R.M. Latenision, “Hot corrosion in gas turbine components”, Engineering failure analysis, 9, 2002, 31-43.
B. Q. Wang, G. Q. Geng and A.V. Levy, Surface & Coating Technology, Vol. 54-55, (1992), pp.529-35.
Y.T. Pei, D. Galvan, J. Th. M. De Hosson, A. Cavaleiro, “Nanostructured TiC/a-C coatings for low friction and wear resistant application”, Surface & Coatings Technology, Vol. 198, 2005, pp 44-50.
S.B. Mishra, S. Prakash, K. Chandra, “Studies on erosion behavior of plasma sprayed coatings on a Ni-based super alloy”, Wear, Vol. 260, 2006, 422-432.
Kevin J. Stein, Brien S. Schorr, Arnold R. Marder, “Erosion of thermal spray MCr- Cr 3 C 2 ”, Wear, Vol. 224, 1999, pp 153-159.
R. Norling, I. Olefjord, “Erosion-corrosion of Fe- and Ni-based alloys at 550C”, Wear, Vol.254, 2003, pp 173-184.
S. Prakash, S. Singh, B. S. Sidhu and A. Madeshia, (2001), “Tube Failures in Coal Fired Boilers,” Proc. National Seminar on Advances in Material and Processing, Nov., 9-10, IITR, Roorkee, India, pp. 245-253.
Chen, H. C., Liu, Z. Y. and Chuang, Y. C., (1993), “Degradation of Plasma-Sprayed Alumina and Zirconia Coatings on Stainless Steel During Thermal Cycling and Hot Corrosion,” Thin Solid Films, Vol. 223, No. 1, pp. 56-64.
N. Priyantha, P. Jayaweera, A. Sanjurjo, K. Lau, K. Krish, “Corrosion-resistant metallic coatings for applications in highly aggressive environment”, Surface & Coating Technology, Vol. 163-164, 2003, 31-36.
M.G. Hocking, “Coating resistant to erosive/corrosive and severe environment”, Surface Coatings & Technology, Vol. 62, 1993, p 460-466.
L. Fedrizzi, S. Rossi, R. Cristel, P.L. Bonora, “Corrosion and wear behavior of HVOF cermet coatings used to eplace hard chromium”, Electrochemica Acta, Vol 49, 2004, pp 2803-2814.
R. Heath, P. Heimgartner, G. Irons, R. Miller, and S. Gustafsson, Material Science Forum, Vol. [251]-54, [1997], 809-816.
P.Bansal, N. P. Padture, A. Vasiliev, “ Improved interfacial properties of Al 2 O 3 -13wt%TiO 2 plasma sprayed coatings derived from nanocrytalline powders”, Acta Materialia, 2003, Vol.51, pp.2959-2970.
B. liang, C. Ding, “Thermal shock resistance of nano-structured and conventional zirconia coatings deposited by atmospheric spraying”, Surface & Coating Technology journal,2005,Vol.197,pp.85-192.
Buta singh Sidhu, S. Prakash ., “Evaluation of the corrosion behaviour of plasma sprayed Ni 3 Al coatings on steel in oxidation and molten salt environments at 900℃”, Surface & coatings technology, 166, Vol. 2003, pp. 89-100.
T.S. Sidhu, S. Prakash and R.D. Agrawal, “Hot corrosion performance of a NiCr coated Ni-based alloy”, Scripta Materialia, Vol.55, 2006, pp.179-182.
S.B. Mishra, K. Chandra, S. Prakash, B. Venkataraman, “Characterization and erosion behaviour of a plasma sprayed Ni 3 Al coating on a Fe-based superalloy”, Materials Letters, Vol.59, 2005, pp. 3694-3698.
H. Singh , S. Prakash , D. Puri, “Some observations on the high temperature oxidation behaviour of plasma sprayed Ni3Al coating”,Materials Science & Engineering, Vol….., 2006, PP……
Harpreet Singh, D. Puri, S. Prakash, “Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy”, Vol.192, 2005, pp. 27-38.
Hazoor Singh Sidhu a,*, Buta Singh Sidhu b, S. Prakash, “The role of HVOF coatings in improving hot corrosion resistance of ASTM-SA210 GrA1 steel in the presence of Na 2 SO 4 –V 2 O 5 salt deposits”, Surface & Coatings Technology, Vol. 200, 2006, pp. 5386– 5394.
S. Paldey, S. C. Deevi, “Single layer and multilayer wear resistant coatings of (Ti,Al): a review”, Materials Science & Engineering, Vol: A 342, 2003, pp 58-79.
L.A. Dobrzanski, K. Lukaszkowicz, A. Zarychta, L. Cunha, “Corrosion resistance of multilayer coatings deposited by PVD techniques onto the brass substrate”, Journal of Materials Processing Technology, Vol. 164-165, 2005, pp 816-821.
In S. Choi, Jong C. Park, “The corrosion behavior of TiAlN coatings prepared by PVD in a hydrofluoric gas atmosphere”, Surface Coatings & Technology, Vol. 131, 2000, pp.383-385.
Sugehis Liscano, Linda Gil, O.A. Leon, Marlon Cruz, Mariana H. Staia, “Corrosion performance of duplex treatments based on plasma nitriding and PAPVD TiAlN coating ”, Surface Coatings & Technology, Vol. 201, 2006, 4419-4423.
R. Rodriguez-Baracaldo, J.A. Benito, E.S. Puchi-Cabrera, M.H. Staia, “High temperature wear resistance of (TiAl)N PVD coating on untreated and gas nitrided AISI H13 steel with different heat treatments”, Wear, Vol. 262, 2007, 380-389.
W. Kalss, A. Reiter, V. Derfinger, C. Gey, J.L. Endrino, “Modern coatings in high performance cutting applications”, International Journal of Refractory Metals & Hard Materials, Vol. 24, 2006, pp 399-404.
S. Tsipas, J.M. Brossard, M.P. Hierro, J.A. Trilleros, L. Sánchez, F.J. Bolívar, F.J. Pérez, “Al–Mn CVD-FBR protective coatings for hot corrosion application”, Surface & Coatings Technology, Vol. 201, 2007, pp.4489–4495.
F.J. P′ereza,U, F. Pedrazaa, M.P. Hierroa, P.Y. Hou, “Adhesion properties of aluminide coatings deposited via CVD in fluidised bed reactors_CVD-FBR/on AISI 304 stainless steel”, Surface and Coatings Technology, Vol. 133-134, 2000, pp..338-343.
P.Bansal, N. P. Padture, A. Vasiliev, “ Improved interfacial properties of Al 2 O 3 -13wt%TiO 2 plasma sprayed coatings derived from nanocrytalline powders”, Acta Materialia, Vol.51 (2003), pp.2959-2970.
L.L. Shaw, D. Goberman, R. Ren, M. Gell, S. jiang, Y. Wang, T.D. Xiao, P.R. Strutt,” The dependency of microstructure and properties of nanostructured coatings on plasma spray conditions”, Surface Coatings & Technology, Vol. 130 (2000),pp. 1-8.
Chuanxian Ding, Huang Chen, Xuanyong Liu, Yi Zeng, “Plasma sprayed nanostructured zirconia coatings for wear resistance”, Thermal Spray 2003: Advancing the science & applying the technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, (2003), 455-458.
L. Leblanc, “Abrasion and sliding wear of nanostructured ceramic coatings”, Thermal Spray 2003: Advancing the science & applying the technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, (2003), 291-299.
E. H. Jordan, M. Gell, Y.H. Sohn, D. Goberman, L. Shaw, S. Jiang, M. Wang, T.D. Xiao, Y. Wang, P. Strutt, “Fabrication and evaluation of plasma sprayed nanostructured alumina-titania coatings with superior properties”, Materials Science & Engineering, Vol. [A 301], (2001), 80-89.
Jin-hong Kim, Hyun-seok Yang, Kyeong-ho Baik, Byeung Geun Seong, Chang-hee Lee, Soon Young Hwang, “Development and properties of nanostructured thermal spray coatings”, Current Applied Physics, Vol. [6], issue 6, (2006), 1002-1006.
Bo Liang, Chuanxian Ding, “Thermal shock resistances of nanostructured and conventional zirconia coatings deposited by atmospheric plasma spraying”, Surface Coatings & Technology, Vol. [197], (2005), 185-192.
R. Soltani, T.W. Coyle, J. Mostaghimi, “Wear resistance of nanostructured thermal barrier coatings”, Thermal Spray 2003: Advancing the science & applying the technology, (Ed.) C. Moreau and B. Marple, Published by ASM International, Materials Park, Ohio, USA, (2003), 1535-1540.
Xinhua Lin, Yi Zeng, Chuanxian Ding, Pingyu Zhang, “Effects of temperature on tribological properties of nanostructured and conventional Al 2 O 3 -3 wt% TiO 2 coatings”, Wear, Vol.[256], (2004), 1018-1025.