Research ArticleOpen AccessGoogle Scholar indexed
Slurry Erosive Wear Behavior of Plasma Sprayed Inconel-718 Coatings on Al6061 Alloy
Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
Department of Mechanical Engineering, SBMJCE, Ramanagaram District., Karnataka, India
Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
- 1 Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
- 2 Department of Mechanical Engineering, SBMJCE, Ramanagaram District., Karnataka, India
- 3 Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
- 4 Department of Mechanical Engineering, PES Institute of Technology, Bangalore, Karnataka,India
Journal of Minerals and Materials Characterization and Engineering·Volume 10 (2011)·Pages 445–453·Published 20 April 2011·DOI10.4236/jmmce.2011.105033
Copy link · social · email
Abstract
Plasma Sprayed coatings provide protection against corrosion, erosion and wear. Inconel- 718 is a metallic coating which has good wear and erosion resistance. This is plasma sprayed on to Al6061 substrate and then subjected to slurry erosive wear tests. It is observed that the slurry wear rates of Al6061 decreased on coating the substrate material with Inconel- 718.
KeywordsPlasma sprayInconel- 718Al6061Erosion.
- Chang-Jiu Li , Guan-Jun Yang, Akira Ohmori, “Relationship between particle erosion and lamellar microstructure for plasma-sprayed alumina coatings”, Wear 260 (2006) 1166–1172.
- Da-Wei Zhang, T.C. Lei , “The microstructure and erosive–corrosive wear performance of laser-clad Ni–Cr 3 C 2 composite coating”, Wear 255 (2003) 129–133.
- Diana Lopez, Carlos S′anchez, Alejandro Toro, “Corrosion–erosion behavior of TiN-coated stainless steels in aqueous slurries”, Wear 258 (2005) 684–692.
- H.W. Hoppel, H. Mughrabi, H.-G. Sockel, S. Schmidt, G. Vetter, “Hydroabrasive wear behaviour and damage mechanisms of different hard coatings”, Wear 225–229 (1999) 1088–1099.
- H.W. Wang, M.M. Stack, “Erosion of PVD TiN coatings under simultaneous corrosion in sodium carbonate/bicarbonate buVer slurries containing alumina particles”, Surface and Coatings Technology 106 (1998) 1–7.
- Jari Knuuttila, Samppa Ahmaniemi, Tapio Mantyla, “Wet abrasion and slurry erosion resistance of thermally sprayed oxide coatings”, Wear 232 (1999) 207–212.
- K.L. Rutherford , R.I. Trezona , A.C. Ramarruuthy , I.M. Hutchings, “The abrasive and erosive wear of polymeric paint films”, Wear 203-204 ( 1997) 325-334.
- M. Hadad, R. Hitzek , P. Buergler , L. Rohr, S. Siegmann, “Wear performance of sandwich structured WC–Co–Cr thermally sprayed coatings using different intermediate layers”, Wear 263 (2007) 691–699.
- M.T. Abou El-Khair, A. Abdel Aal, “Erosion–corrosion and surface protection of A356 Al/ZrO 2 composites produced by vortex and squeeze casting”, Materials Science and Engineering A 454–455 (2007) 156–163.
- S. Das, S. Ghosh, A. Pandit, T. K. Bandyopadhyay, A. B. Chattopadhyay, K. Das, “Processing and characterization of plasma sprayed zirconia–alumina–mullite composite coating on a mild-steel substrate”, Journal of Materials Science 40 (2005) 5087-5089.