Corrosion Behavior of Alumina Reinforced Aluminium (6063) Metal Matrix Composites
- 1 Department of Metallurgical and Materials Engineering, Federal University of Technology,Akure, Nigeria
- 2 Department of Metallurgical and Materials Engineering, Federal University of Technology,Akure, Nigeria
Abstract
The influence of alumina volume percent and solution heat-treatment on the corrosion behaviour of Al (6063) composites and its monolithic alloy in salt water, basic and acidic environments is investigated. Al (6063) – Al 2 O 3 particulate composites containing 6, 9, 15, and 18 volume percent alumina were produced by adopting two step stir casting. Mass loss and corrosion rate measurements were utilized as criteria for evaluating the corrosion behaviour of the composites. It is observed that Al (6063) – Al 2 O 3 composites exhibited excellent corrosion resistance in NaCl medium than in the NaOH and H 2 SO 4 media. The unreinforced alloy exhibited slightly superior corrosion resistance than the composites in NaCl and NaOH media but the composites had better corrosion resistance in H 2 SO 4 medium. Furthermore, solution heat-treatment resulted in improved corrosion resistance for both the composites and the unreinforced alloy while the effect of volume percent alumina on corrosion resistance did not follow a consistent trend.
- T. A. Khalifa and T. S. Mahmoud, Elevated Temperature Mechanical Properties of Al alloy AA6063/SiCp MMCs, Proceedings of the World Congress on Engineering 2009 Vol II WCE 2009, July 1 – 3, London, U.K, ISBN: 978 -988 -18210-1-0.
- M. Adiamak, Selected Properties of Aluminium Base Composite Reinforced with Intermetallic Particles, Journal of Achievement in Materials and Manufacturing Technology, Vol. 14, Issue1-2, 2006, Pp 43-47.
- K. R. Ahmad, J. B. Shansul, L.B Hussain and Z. A. Ahmad, The effect of Reinforcement Particle Size on the Microstructure and Hardness of Al/Al 2 O 3 Composite via Powder Metallurgy Route 2003, 12th Conference and 13th Annual General Meeting of the Electron Microscopy Society of Malaysia, Langkawi.
- V. S. Aigbodion, Particulate Strengthened Al-Si/Alumino-Silicate Composite, Journal of Materials Science and Engineering A, Vol. 460-461, 2007, Pp 574-578.
- T. V. Christy, N. Murugan, S. Kumar, Comparative Study on the Microstructure and Mechanical Properties of Al6061/TiB 2 /12p, Journal of Minerals and Materials Characterization and Engineering, Vol. 9, No.1, 2010, Pp 57-65.
- J. S. Kashan, The Effect of Artificial Aging on Mechanical Properties of Metal Matrix Composite, Engineering and Technology Journal, Vol. 28, No. 2, 2010, 282 – 288.
- M. Kok, Production and Mechanical Properties of Al 2 O 3 particle reinforced 2024 Aluminium Composites, Journal of Materials Processing Technology, Vol.16, 2005, Pp 381 – 387.
- G. B. V. Kumar, C. S. P. Rao, N. Selvary, and M. S. Bhagyashekar, Studies on Al7075-Al 2 O 3 Metal Matrix Composites. Journal of Minerals and Materials Characterization and Engineering, Volume 9, No. 1, 2010, Pp 43-45.
- O. Omodara and E. C. Onwujiobi, Production and Mechanical Behaviour of Silicon Carbide Reinforced Al (6063) Alloy Particulate Composites, 2010, B.Eng Thesis: Federal University of Technology, Akure, Nigeria.
- Y. L. Saraswathi, S. Das, D. P. Mondal, Influence of Microstructure and Experimental Parameters on the Erosion – Corrosion Behaviour of Al (alloy) Composites, Materials Science and Engineering A, 425(2006): 244 – 254.
- Z. Yussof, K. R. Ahmad, and S. B. Jamaludin, Comparative Study of Corrosion Behavior of AA 2014/15vol%Al 2 O 3p and AA2009/20Vol% SiCw” Portugaliae Electrochemica Acta, Vol. 26, 2008, pp 291-301.
- ASTM Standards, Metals Test Methods and Analytical Procedures, vol. 3.02, Wear and Erosion; Metal Corrosion, G31, 1994, p. 104.