Characterization of Spent Prebaked Aluminium Carbon Anode as a Source of Fuel for Foundrymen
- 1 Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
- 2 Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
- 3 Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
- 4 Department of Materials Engineering, Kwame Nkrumah University of Science and Technology, Kumasi, Ghana
Abstract
Small scale foundries in Ghana are in search of a suitable coke for their foundry operations since there is no coal mine in Ghana. Two grades of spent prebaked aluminium carbon anodes (herein referred to as grade P and grade K), which are remnants from the aluminium electrolysis at Volta Aluminum Company (VALCO), an aluminium smelting company in Ghana, have been characterized to assess their quality and use as foundry coke. Proximate analysis and X-ray diffraction techniques have been used for their quality assessments. Coke grade P had lower moisture content, volatile matter and ash content compared to grade K. In both grades, sulphur and phosphorus contents were within requirements of a quality foundry coke. However, the volatile matter and ash contents of both grades were not satisfactory. Fixed carbon contents in both grades were below that of a quality foundry coke. Carbon structure of coke found in both grades is crystalline in nature. The crystalline width, Lc, was calculated to be 4.05 ? and 5.12 ? for grade K and P, respectively.
- Adeleke, A.O., Makan, R.S., Ibitoye, S.A., 2006, Characterisation of Ajaokuta coke for blast furnace iron making. J. Min. & Mat. Charact. & Eng. 5(2), 155-165.
- Adygezalov, S.A. Dvortsov, S.P. Shemonaeva, T.N. Strakhov, V.M. Surovtseva, I.V., 2011, Industrial production of coke briquets for copula smelting of iron. Coke & Chemistry, 54(1), 19-22.
- Akpabio, E.J. Obot, O.W., 2011, Optimization utilization of petroleum coke in Nigerian metallurgical industry. J. Min. & Mat. Charact. & Eng., 10(3), 267-278.
- Benk, A. Coban, A., 2011, Molasses and air blown coal tar pitch binders for the production of metallurgical quality formed coke from anthracite fines or coke breeze. Fuel Processing Technology, 92, 1078–1086.
- Nasirudeen, M.B. Jauro, A., 2011, Quality of Some Nigerian Coals as Blending Stock in Metallurgical Coke Production. J. Min. & Mat. Charact. & Eng., 10(1), 101-109.
- Sultanguzin, I.A. Isaev, M.V. Kurzanov, S.Y., 2011, Optimizing the production of coke, coal chemicals, and steel on the basis of environmental and energy criteria. Metallurgist, 54(9–10), 600-607.
- He, Q. Wang, R. Wang, W. Xu, R. Hu, B., 2011, Effect of particle size distribution of petroleum coke on the properties of petroleum coke-oil slurry. Fuel: In press.
- Zhan, X. Jia, J. Zhou, Z. Wang, F., 2011, Influence of blending methods on the co-gasification reactivity of petroleum coke and lignite. Energy Conversion and Management, 52, 1810–1814.
- Malyutina, E.M. Dyskina, B.S., 2011, Expanding pitch-coke production. Coke & Chmistry, 54(1), 16-18.
- Kubota, M. Ito, T., 2011, Watanabe F, Matsuda H, Pore structure and water adsorptivity of petroleum coke-derived activated carbon for adsorption heat pump-Influence of hydrogen content of coke. Applied Thermal Engineering, 31, 1495- 1498.
- Shenqi, X. Zhijie, Z. Jie, X. Guangsuo, Y. Fuchen, W., 2011, Effects of alkaline metal on coal gasification at pyrolysis and gasification phases. Fuel, 90, 1723–1730.
- Lu, L. Sahajwalla, V. Kong, C. Harris, D., 2001, Quantitative X-ray diffraction analysis and its application to various coals. Carbon, 39, 1821-1833.
- Sonibare, O.O. Haeger, T. Foley, S.F., 2010, Structural characterization of Nigerian coals by X-ray diffraction, Raman and FTIR spectroscopy. Energy, 35, 5347-5353.
- Askeland, D. Phule, P.P., 2006, The science and engineering of materials, International student edition, Canada, Thomson.