Studies on Processing and Characterization of Hydroxyapatite Biomaterials from Different Bio Wastes
- 1 Centre for Advanced Material Processing, Central Mechanical Engineering Research Institute,Mahatma Gandhi Avenue, Durgapur-713209, India
- 2 Centre for Advanced Material Processing, Central Mechanical Engineering Research Institute,Mahatma Gandhi Avenue, Durgapur-713209, India
- 3 Department of Biotechnology, National Institute of Technology, Mahatma Gandhi Avenue Durgapur-713209, India
- 4 Department of Biotechnology, National Institute of Technology, Mahatma Gandhi Avenue Durgapur-713209, India
Abstract
Development of suitable materials that acts as an interface between the implant and tissues in body system structurally, mechanically and bio functionally is important for the success of tissue engineering. This motivated materials scientists and biologists to find out suitable bioactive materials for the aforementioned purpose. There has been growing interest in developing bioactive synthetic ceramics that could closely mimic natural apatite characteristics. Hydroxyapatite (HAp) has been widely used as a biocompatible ceramic but mainly for contact with bone tissue, due to its resemblance to mineral bone. This study presents the synthesis and characterization of HAp materials from different sources like bovine bone and fish scales and their application in tissue engineering. The phase purity and crystallinity of different calcined HAp powder was determined by XRD and FTIR analysis. The Thermo Gravimetric and Differential Thermal Analysis were carried out to show the thermal stability of the HAp powder. The morphology of the powder was observed under Scanning Electron Microscopy (SEM). Cytotoxicity evaluation of the developed powder was carried out in RAW macrophage like cell line media for an incubation period of 72 hours. These results proved the biocompatibility of HAp powders obtained from different biosources for tissue engineering applications.
- Mobasherpour, I., Heshajin, M. S., Kazemzadeh, A., M. Zakeri, M., 2007, ‘‘Synthesis of Nanocrystalline Hydroxyapatite by using Precipitation Method,’’ J. Alloys Compd., Vol. 430, pp. 330-333.
- Parthiban, S.P., Elayaraja, K., Girija, E. K., Yokogawa, Y., Kesavamoorthy, R., Palanichamy, M., Asokan, K., and Narayana Kalkura, S., 2009, “Preparation of thermally stable nanocrystalline hydroxyapatite by hydrothermal method.” J. Mater. Sc: Mater. Med., Vol. 20, pp. 77-83.
- Kim, W., Zhang, Q., and F. Saito., 2000, “Mechanochemical synthesis of hydroxyapatite from Ca(OH) 2 -P 2 O 5 and CaO-Ca(OH) 2 -P 2 O 5 mixtures.” J. Mater. Sci., Vol. 35, pp. 5401-5405.
- Balamurugan, A., Kannan, S., and Rajeswari S., 2002, “Bioactive sol-gel hydroxyapatite surface for biomedical applications-in vitro study.” Trends. Biomater. Artif. Organs, Vol. 16, pp. 18-20.
- Tadic D., and. Epple, M., 2003, “Mechanically stable implants of synthetic bone mineral by cold isostatic pressing.”, Biomaterials, Vol. 24, pp. 4565-4571.
- Mondal, S., Mahata, S., Kundu, S., and Mondal, B., 2010, “Processing of natural resourced hydroxyapatite ceramics from fish scale.” Adv. Appl.Ceram.: Struct. Funct. Bioceram., Vol. 109, pp. 234-239.
- Sastry T.P., Sankar S., Mohan R., Rani S., Sundaraseelan T., 2008, “Preparation and partial characterization of collagen sheet from fish (Lates calcarifer) scales” International Journal of Biological Macromolecules, Vol. 42, pp. 6-9.
- Kalita, S.J., Bhardwaj, A., Bhatt, H.A., 2007, “Nanocrystalline calcium phosphate ceramics in biomedical engineering.” Materials Science and Engineering: C, Vol. 27 Issue 3, pp. 441-449.
- Liao, C. J., Lin, F. H., Chen, K. S., and J. S. Sun., J.S., 1999, “Thermal decomposition and reconstitution of hydroxyapatite in air atmosphere.” Biomaterials, Vol. 20, pp. 1807–1813.
- Roy, M., Krishna, B V., Bandyopadhya, A., Bose, S., 2011, “Compositionally graded hydroxyapatite/tricalcium phosphate coating on Ti by laser and induction plasma.” Acta Biomaterialia, Vol. 7, pp. 866-873.
- Stok, J. V. der, Lieshout, E. M. M. V., Massoudi, Y. E., Gerdine H. Van Kralingen, G. H. V., and Patka, P., 2011, “Bone substitutes in the Netherlands – A systematic literature review” Acta Biomaterialia., Vol. 7 , pp. 739-750.
- Mortier, A., Lemaitre, J., and Rouxhet, P.G., 1989, “Temperature programmed characterization of synthetic calcium deficient hydroxyapatite.” Thermochim. Acta,, Vol. 143, pp. 265-282.