Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites
- 1 Department of Mechanical Engineering,St. Joseph Engineering College, Mangalore-575 028, Karnataka, INDIA.
- 2 Department of Industrial Production Engineering,National Institute of Engineering, Mysore-570 008, Karnataka, INDIA.
- 3 Department of Mechanical Engineering,Sri Jayachamarajendra College of Engineering, Mysore-575 006. Karnataka, INDIA
- 4 Department of Mechanical Engineering,St. Joseph Engineering College, Mangalore-575 028, Karnataka, INDIA.
Abstract
This paper deals with the study of mechanical properties of Potassium Titanate Whisker (PTW) reinforced epoxy based Polymer Matrix Composites (PMCs). Epoxy composites filled with PTW in various content of 0-20 wt% were prepared using the casting technique. Data on neat epoxy is also included for comparison. All tests were conducted at room temperature and as per ASTM standards. It was observed that inclusion of PTW affected most of the mechanical properties of neat epoxy. Density, hardness and heat deflection temperature of neat epoxy were found to increase with the PTW content. However tensile and flexural properties of the developed composites exhibited a varying trend with respect to PTW content. Epoxy filled with 10 wt% PTW showed good improvement in tensile strength and flexural strength of neat epoxy. It was observed that PTW is not beneficial in improving the impact strength of neat epoxy. Composites with 20 wt% PTW exhibited least impact strength. This paper also highlights the possible reasons for variation in the mechanical properties of developed polymer composites.
- Charles A. Happer, Handbook of Plastics, Elastomers and Composites, 2004, 4th Edition, McGraw -Hill Publications.
- De S. K. and White, J. R., Short Fibre Polymer Composites, 1996, Woodhead Publishing Limited, Cambridge, UK.
- John V. Milewski and Harry S. Katz, 1987, Whiskers, In: Handbook of Reinforcements for Plastics, pp. 205-229, Van Nostrand Reinhold, New York.
- Youxi Lin, Chenghui Gao and Ning Li, 2006, “Influence of CaCO 3 whisker content on mechanical and tribological properties of polyetheretherketone composites”, J.Mater. Sci. Technol. Vol.22, No.5, pp. 584-588.
- Y-X Lin, C.Gao and M.Chen, 2009, “Thermomechanical properties and tribological behavior of CaCO 3 whisker-reinforced polyetheretherketone composites”, Proc. Inst. Mech. Engnrs. Part D: J. Engg. Tribol. Vol 223, pp. 1013-1018.
- Y. Zhang, C.A.Pickles and J.Cameron, 1992, “The production and mechanical properties of silicon carbide and alumina whisker-reinforced epoxy composites”, J. Reinf. Plast. Compos. 11, pp. 1176–1186.
- M.Avella, E.Martuscelli, M.Raimo, R.Partch and S.G. Gangolli, 1997, ”Polypropylene reinforced with silicon carbide whiskers”, J. Mater. Sci 32, pp. 2411-2416.
- Shibo Wang, Shirong Ge and Dekun Zhang, 2009, “Comparison of tribological behavior of nylon composites filled with zinc oxide particles and whiskers”, Wear 266, pp. 248-254.
- B.Z.Jang, J.Y.Liau, L.R.Hwang and W.K.Shih, 1989, “Structure-property relationships in thermoplastic particulate- and ceramic whisker-modified epoxy resins”, J. Reinf. Plast. Compos. 8, pp. 312–333.
- K. Suganuma, T. Fujita, K. Nihara and N. Suzuki, 1989, “AA6061 composite reinforced with potassium titanate whisker”, J. Mater. Sci. Lett. Vol.8, No. 7, pp. 808–810.
- Feng Xin, Wang Huaiyuan, Shi Yijun, Chen Donghui and Lu Xiaohua, 2007, “The effects of the size and content of potassium titanate whiskers on the properties of PTW/PTFE composites”, Mater. Sci. Eng. A 448, pp. 253–258.
- L.F.Chen, Y.P.Hong, Y.Zhang and J.L.Qiu, 2000, “Fabrication of polymer matrix composites reinforced with controllably oriented whiskers”, J. Mater. Sci., 35, pp. 5309-5312.
- Shoubing Chen, Qihua Wang, Tingmei Wang and Xianqiang Pei, 2011, “Preparation, damping and thermal properties of potassium titanate whiskers filled castor oil based polyurethane/epoxy interpenetrating polymer network composites”, Mater. Des.32, pp. 803-807.