Research ArticleOpen AccessGoogle Scholar indexed
Preparation and Characterization of Electrically and Thermally Conductive Polymeric Nanocomposites
Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
- 1 Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
- 2 Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
- 3 Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
- 4 Laboratory for Advanced Research in Polymeric Materials (LARPM), Central Institute of Plastics Engineering & Technology, Bhubaneswar-751 024, India
Journal of Minerals and Materials Characterization and Engineering·Volume 11 (2012)·Pages 744–756·Published 24 July 2012·DOI10.4236/jmmce.2012.117062
Copy link · social · email
Abstract
The dielectric properties of composites and nanocomposites composed of epoxy resin as base matrix and AlN (Aluminum Nitride) as micro and nanofiller has been studied at variable loading of AlN. To improve the dispersion of the filler within the polymer matrix, AlN was surface modified with silane coupling agent (SCA). The thermal conductivity behavior of epoxy/AlN composites and nanocomposites has been studied at variable percentage of filler and temperatures. Test result indicated an increase of thermal conductivity of the composites at 20 wt% of AlN. Also, silane treated composites exhibited improved electrical conductivity properties wherein the electrical insulation property decreased in terms of di-electric strength and resistivity.
KeywordsEpoxyMicro-AlNNano-AlNInsulationElectrical PropertiesResistivity
- Kim W., Bae J. and Choi I., 1999, “Thermally conductive EMC (epoxy molding compound) for microelectronic encapsulation.” Polymer Engineering and Science, Vol.39, No.4, pp.756-766,
- Ohashi M., Kawakami S., Yokogawa Y. and Lai G.C., 2005, “Spherical Aluminum Nitride Fillers for Heat-Conducting Plastic Packages.”Journal of the American Ceramic Society. Volume 88, Issue 9, pp. 2615–2618.
- Procter P. and Solc J., 1991, “Improved thermal conductivity in microelectronic encapsulants.” IEEE Transactions on Components Hybrids and Manufacturing Technology, Vol 14, No. 4, pp. 708-713.
- Bujard P., Kuhnlein G., Ino S. and Shiobara, 1994, “Thermal conductivity of molding compounds for plastic packaging.” IEEE Transactions on Components Packaging and Manufacturing Technologies Part A, Vol. 17, No. 4, pp. 527–532.
- Wong C. P. and Bollampally R. S., 1999, "Thermal Conductivity, Elastic Modulus, and Coefficient of Thermal Expansion of Polymer Composites Filled with Ceramic Particles for Electronic Packaging." J. Applied Polymer Science, Vol. 74, pp. 3396–3403.
- Sim L.C., Ramanan S.R., Ismail H., Seetharamu K.N. and Goh T.J., 2005, “Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes”, Journal of Thermochimica Acta, Volume 430, Issue 1-2, pp. 155-165.
- Lee G. W., Park M., Kim J., Lee J. I. and Yoon H. G., 2006, “Enhanced thermal conductivity of polymer composites filled with hybrid filler.” Composite A, Applied Science & Manufacturing, Vol. 37, Issue 5, pp. 727–734.
- Lee G. W., Lee J. I., Lee S. S., Park M. and Kim, 2005, “Effect of AlN content on the performance of brominated epoxy resin for printed circuit board substrate”, Journal of Polymer Science, Part B: Polymer Physics, Vol. 40, pp. 1259–1263.
- Hatsuo I. and Rimdusit S., 1998, “Very high thermal conductivity obtained by boron nitride-filled polybenzoxazine”. Thermochim Acta, Vol. 320, Issue 1-2, pp. 177-186.
- Nagai Y. and Lai G. C., 1997, Journal of the American Ceramic Society, Vol. 105, pp. 197–200
- Hsieh C. and Chung S., 2006, “High thermal conductivity epoxy molding compound filled with a combustion synthesized AlN powder.” Journal of Applied Polymer Science, Vol. 102, Issue 5, pp. 4734–4740.
- Xie S., Zhu B., Li J., Wei X. and Xu Z., 2004, “Preparation and properties of polyimide/aluminum nitride composites.” Polymer Testing, Vol.23, Issue 7, pp. 797–801.