Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique
- 1 Department of Mechanical Engineering, Bannari Amman Institute of Technology, Sathyamangalam, India
- 2 RVS Faculty of Engineering, Coimbatore, India
Abstract
Al-7075 alloy-base matrix, reinforced with mixtures of silicon carbide (SiC) and boron carbide (B4C) particles, know as hybrid composites have been fabricated by stir casting technique (liquid metallurgy route) and optimized at different parameters like sliding speed, applied load, sliding time, and percentage of reinforcement by Taguchi method. The specimens were examined by Rockwell hardness test machine, Pin on Disc, Scanning Electron Microscope (SEM) and Optical Microscope. A plan of experiment generated through Taguchi’s technique is used to conduct experiments based on L27 orthogonal array. The developed ANOVA and the regression equations were used to find the optimum wear as well as co-efficient of friction under the influence of sliding speed, applied load, sliding time and percentage of reinforcement. The dry sliding wear resistance was analyzed on the basis of “smaller the best”. Finally, confirmation tests were carried out to verify the experimental results.
- S. J. Harris, “Cast Metal Matrix Composites,” Materials Science and Technology, Vol. 4, No. 3, 1988, pp. 231- 239. HUdoi:10.1179/026708388790330024U
- Y. Iwai, H. Yonede and T. Honda, “Sliding Wear Behaviour of SiC Whisker-Reinforced Aluminum Composite,” Wear, Vol. 181-183, No. 2, 1995, pp. 594-602. HUdoi:10.1016/0043-1648(95)90175-2U
- A. Daoud, M. T. Abou El-Khair and A. N. Abdel-Azim, “Microstructure and Wear Behavior of Squeeze Cast 7075 Al-Al2O3 Particle Composites,” Proceedings of the 14th International Offshore and Polar Engineering Conference, Toulon, 23-28 May 2004, p. 252.
- S. V. Prasad and R. Asthana, “Aluminum Metal-Matrix Composites for Automotive Applications,” Tribology Letters, Vol. 17, No. 3, 2004, pp. 445-453. HUdoi:10.1023/B:TRIL.0000044492.91991.f3U
- N. Natarajan, S. Vijayarangan and I. Rajendran, “Wear Behaviour of A356/25SiCp Aluminium Matrix Composites Sliding Against Automobile Friction Material,” Wear, Vol. 261, No. 7-8, 2006, pp. 812-822. HUdoi:10.1016/j.wear.2006.01.011U
- S. Basavarajappa and G. Chandramohan, “Wear Studies on Metal Matrix Composites: A Taguchi Approach,” Journal of Material Science Technology, Vol. 21, No. 6, 2005, pp. 845-850.
- N. Radhika, R. Subramanian and S. Venkat Prasat, “Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques,” Journal of Minerals & Materials Characterization & Engineering, Vol. 10, No. 5, 2011, pp. 427-443.
- K. Umanath, S. T. Selvamani and K. Palanikumar, “Friction and Wear Behaviour of Al-6061 Alloy (SiCp +Al 2 O 3p ) Hybrid Composites,” International Journal of Engineering Science and Technology, Vol. 3, No. 7, 2011, pp. 5441-5451.
- P. J. Ross, “Taguchi Techniques for Quality Engineering,” 2nd Edition, McGraw-Hill Book Co., New York, 1996, pp. 23-42.
- Siddhartha, A. Patnaik and A. D. Bhatt, “Mechanical and Dry Sliding Wear Characterization of Epoxy-TiO 2 Particulate Filled Functionally Graded Composite Materials Using Taguchi Design Of Experiment,” Material & Design, Vol. 32, No. 2, 2011, pp. 615-627. HUdoi:10.1016/j.matdes.2010.08.011U