Effects of Palm Kernel Shell on the Microstructure and Mechanical Properties of Recycled Polyethylene/Palm Kernel Shell Particulate Composites
- 1 Department of Metallurgical and Materials Engineering, University of Lagos Akoka, Yaba, Lagos, Nigeria
- 2 Department of Metallurgical and Materials Engineering, University of Lagos Akoka, Yaba, Lagos, Nigeria
- 3 Department of Metallurgical and Materials Engineering, University of Lagos Akoka, Yaba, Lagos, Nigeria
- 4 Department of Metallurgical and Materials Engineering, University of Lagos Akoka, Yaba, Lagos, Nigeria
Abstract
The effect of palm kernel shell on the microstructure and mechanical properties of recycled polyethylene (RLDPE) reinforced with palm kernel shell particulate composite was evaluated to assess the possibility of using it as a new material for engineering applications. The composites were produced by compounding and compressive moulding technique by varying the Palm kernel shell particle from 5-25vol% with particles size of 150, 300 and 400 μm. The microstructure (SEM/EDS) and the mechanical properties of the composites were investigated. The hardness of the composite increases with increase in palm kernel shell content and the tensile strength of the composite increased to optimum of 5vol%. Scanning electron Microscopy (SEM) of the composites surfaces indicates fairly interfacial interaction between the palm kernel shell particles and the RLDPE matrix. The composites produced with 150 μm particle size have the best properties of the entire grade. Hence this grade can be use for interior applications such as car seat, dash board, and car interior for decorative purposes or other interior parts of automobile where high strength is not considered a critical requirement.
- U. Johnson, H. Mahmud and Z. Mohd, “Enhancement and Prediction of Modulus of Elasticity of Palm Kernel Shell Concrete,” Materials and Design Journal, Vol. 32, No. 4, 2010, pp. 2143-2148.
- H. Larbig, H. Scherzer, B. Dahlke and R. Poltrock, “Natural Fiber Reinforced Foams Based on Renewable Resources for Automotive Interior Applications,” Journal of Cellular Plastics, Vol. 34, No. 4, 1998, pp. 361-379.
- D. Rozman, A. Zainal and S. Umaru, “Natural Fibers, Biopolymers, and Biocomposites: Oil Palm Fiber-Thermo- plastics Composites,” CRC Press, Boca Raton, 2005.
- P. Wambua, U. Ivens and I. Verpoest, “Natural Fibers: Can They Replace Glass in Fiber-Reinforced Plastics?” Composites Science and Technology, Vol. 63, No. 9, 2003, pp. 1259-1264. doi:10.1016/S0266-3538(03)00096-4
- P. Wambua, B. Vangrimde, S. Lomov and I. Verpoest, “The Response of Natural Fiber Composites to Ballistic Impact by Fragment Simulating Projectiles,” Composite Structures, Vol. 77, No. 2, 2007, pp. 232-240. doi:10.1016/j.compstruct.2005.07.006
- R. Kozlowski and M. Helwig, “Lignocellulosic Polymer Composite,” In: P. N. Prasad, Ed., Science and Technology of Polymers and Advanced Materials, Plenum Press, New York, 1998, pp. 679-698.
- M. M. Davoodi, “Conceptual Design of a Polymer Composite Automotive Bumper Energy Absorber,” Materials & Design, Vol. 29, No. 7, 2008, pp. 1447-1452. doi:10.1016/j.matdes.2007.07.011
- D. J. Andrea and W. R. Brown, “Material Selection Processes in Automotive Industry,” Michigan Transportation Research Institute, Ann Arbor, 1993.
- E. W. Godwin and F. L. Matthews, “Review of the Strength of Joints in Fibre-Reinforced Plastics: Part 1 Mechanically Fastened Joints,” Composites, Vol. 11, No. 3, 1980, pp. 155-160. doi:10.1016/0010-4361(80)90008-7
- S. Jevanthi and J. JanciRani, “Improving Mechanical Properties by Hybrid Long Fiber Reinforced Composite for Front Beam of Automotive,” European Journal of Scientific Research, Vol. 60, No. 2, 2011, pp. 195-199.