Research ArticleOpen AccessGoogle Scholar indexed
Study on Effect of Welding Speed on Micro Structure and Mechanical Properties of Pulsed Current Micro Plasma Arc Welded Inconel 625 Sheets
Department of Mechanical Engineering, AU College of Engineering, Andhra University, Visakhapatnam, India
Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, Visakhapatnam, India
Vice Chancellor, Centurion University of Technology & Management, Odisha, India
- 1 Department of Mechanical Engineering, AU College of Engineering, Andhra University, Visakhapatnam, India
- 2 Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, Visakhapatnam, India
- 3 Vice Chancellor, Centurion University of Technology & Management, Odisha, India
Journal of Minerals and Materials Characterization and Engineering·Volume 11 (2012)·Pages 1027–1033·Published 31 October 2012·DOI10.4236/jmmce.2012.1110106
Copy link · social · email
Abstract
Nickel alloys had gathered wide acceptance in the fabrication of components which require high temperature resistance and corrosion resistance, such as metallic bellows used in expansion joints used in aircraft, aerospace and petroleum industry. Micro Plasma Arc Welding (MPAW) is one of the important arc welding processes commonly using in fabric- cation of Nickel alloys. In the present paper welding of Inconel 625 sheets using pulsed current micro plasma arc weld- ing was discussed. The paper mainly focuses on studying the weld quality characteristics like weld pool geometry pa- rameters, microstructure, grain size, hardness and tensile properties of Pulsed Current Micro Plasma Arc Welded In- conel 625 sheets at different welding speeds. Results reveals that at a welding speed of 260 mm/minute better weld quality characteristics can be obtained.
KeywordsPulsed Current Micro Plasma Arc WeldingInconel 625Grain SizeHardnessTensile Properties
- M. Balasubramanian, V. Jayabalan and V. Balasubrama- nian, “Effect of Process Parameters of Pulsed Current Tungsten Inert Gas Welding on Weld Pool Geometry of Titanium Welds,” Acta Metallurgica Sinica (English Let- ters), Vol. 23, No. 4, 2010, pp. 312-320.
- B. Balasubramanian, V. Jayabalan and V. Balasubramanian, “Optimizing the Pulsed Current Gas Tungsten Arc Welding Parameters,” Journal of Materials Science & Technology, Vol. 22, No. 6, 2006, pp. 821-825.
- K. S. Prasad, C. S. Rao and D. N. Rao, “Optimizing Pulsed Current Micro Plasma Arc Welding Parameters to Maximize Ultimate Tensile Strength of Inconel 625 Nickel Alloy Using Response Surface Method,” Interna- tional Journal of Engineering, Science and Technology, Vol. 3, No. 6, 2011, pp. 226-236.
- K. S. Prasad, C. S. Rao and D. N. Rao, “Optimizing Fu- sion Zone Grain Size and Ultimate Tensile Strength of Pulsed Current Micro Plasma Arc Welded Inconel 625 Alloy Sheets Using Hooke & Jeeves Method,” Interna- tional Transaction Journal of Engineering, Management, & Applied Sciences & Technologies, Vol. 3, No. 1, 2012, pp. 87-100.
- K. S. Prasad, C. S. Rao and D. N. Rao, “Effect of Process Parameters of Pulsed Current Micro Plasma Arc Welding on Weld Pool Geometry of Inconel 625 Welds,” Kovove Materialy—Metallic Materials, Vol. 50, No. 3, 2012, pp. 153-159 (in press).
- R. Manti, D. K. Dwivedi and A. Agarwal, “Microstruc- ture and Hardness of Al-Mg-Si Weldments Produced by Pulse GTA Welding,” The International Journal of Ad- vanced Manufacturing Technology, Vol. 36, No. 3-4, 2008, pp. 263-269. doi:10.1007/s00170-006-0849-z
- T. S. kumar, V. Balasubramanian, S. Babu and M. Y. Sanavullah, “Effect of Pulsed Current GTA Welding Pa- rameters on the Fusion Zone Microstructure of AA 6061 Aluminium Alloy, Metal and Materials International, Vol. 13, No. 4, 2007, pp. 345-351.
- N. Karunakaran and V. Balasubramanian, “Effect of Pulsed Current on Temperature Distribution, Weld Bead Profiles and Characteristics of Gas Tungsten Arc Welede Aluminium Alloy Joints,” Transactions of Nonferrous Metals Society of China, Vol. 21, No. 2, 2011, pp. 278- 286. doi:10.1016/S1003-6326(11)60710-3
- G. Padmanaban and V. Balasubramanian, “Influences of Pulsed Current Parameters on Mechanical and Metallurgical Properties of Gas Tungsten Arc Welede AZ31B Magnesium Alloy,” Metals and Materials International, Vol. 17, No. 4, 2011, pp. 679-687. doi:10.1007/s12540-011-0826-4