Influence of Microstructure on Beneficiation of Low-Grade Siliceous Manganese Ore from Orissa, India
- 1 Ravenshaw University, Cuttack, India
- 2 Institute of Minerals and Materials Technology, Bhubaneswar, India
- 3 Institute of Minerals and Materials Technology, Bhubaneswar, India
- 4 OMDC Ltd., Thakurani, Orissa, India
Abstract
Two low-grade siliceous manganese ores such 1) siliceous crystalline and 2) siliceous cherty types from north Orissa, Indiawas mineralogically characterized and investigated for their possible upgradation. Both the Mn-ore types were subjected to different physical beneficiation techniques under identical conditions and results reported. The results revealed that in the case of low-grade siliceous crystalline type Mn-ore a feed having 26% Mn could be upgraded to more than 45% Mn by dry magnetic separation with 69% recovery at 1.00 tesla magnetic intensity. But the cherty type Mn-ore could not respond well to any of the beneficiation techniques, particularly dry magnetic separation, because of poor liberation even at a size fraction below 100 mesh, though the other type gives best result at this size fraction.
- P. P. Mishra, “Mineralogical and Geochemical Studies on Manganese Ores from Roida Region, Keonjhar Dist, Orissa with Special Reference to Their Optimum Utilization,” Unpublished Thesis, Utkal University, Orissa, 2005.
- Indian Mineral Year Book, “Manganese Ores,” Indian Bureau of Mines Publications, Nagpur, 2007, pp. 1-21.
- G. V. Rao, B. K. Mohapatra and A. K. Tripathy, “Enrichment of the Manganese Content by Wet High Intensity Magnetic Separator from Chikla Manganese Ore, India,” Magnetic and Electrical Separation, Vol. 9, No. 2, 1988, pp. 69-82. doi:10.1155/1998/45169
- B. K. Mohapatra, D. S. Rao and R. K. Sahu, “Characterisation and Magnetic Separation Studies on Chikla Manganese Ore, Maharastra,” Indian Mining and Engineering Journal, 1995, pp. 37-41.
- P. P. Mishra, B. K. Mohapatra and K. Mahanta, “Upgradation of Low-Grade Siliceous Manganese Ore from Bonai-Keonjhar Belt, Orissa, India,” Journal of Minerals & Materials Characterization and Engineering, Vol. 8, No. 1, 2009, pp. 47-56.