Research ArticleOpen AccessGoogle Scholar indexed
Studies on Extraction Behaviour of Cobalt(II) with Nitrobenzoylprazolone-5
Mineral Processing Unit, Department of Chemistry, Federal University of Technology, Owerri, Nigeria
Department of Industrial Chemistry, Abia State University, Uturu, Nigeria
Mineral Processing Unit, Department of Chemistry, Federal University of Technology, Owerri, Nigeria
- 1 Mineral Processing Unit, Department of Chemistry, Federal University of Technology, Owerri, Nigeria
- 2 Department of Industrial Chemistry, Abia State University, Uturu, Nigeria
- 3 Mineral Processing Unit, Department of Chemistry, Federal University of Technology, Owerri, Nigeria
Journal of Minerals and Materials Characterization and Engineering·Volume 01 (2013)·Pages 90–94·Published 24 May 2013·DOI10.4236/jmmce.2013.13017
Copy link · social · email
Abstract
The extraction of Cobalt(II) from aqueous solution using 1-phenyl-3-methyl-4-(p-nitrobenzoyl)pyrazolone (HPMNP) in various organic solvents was studied as a function of pH and extractant concentration. Extraction into organic chloroform phase was more efficient than with any other solvent. The extraction equilibrium constant was found to be log K ex = -7.04. Optimum conditions for extraction of Co(II) exist at pH of between 5.5 and 7.0, ionic strength of 0.3 Mand constant extractant concentration of 0.02 M. Shaking the organic Co(II) chelate complex with 0.2 Macid strips the Co(II) ions into the aqueous phase. It was established that Co(II) complex extracted is of composition, Co(PMNP) 2 .
KeywordsExtractionSolventComplexPyrazolones
- D. S. Flett and D.S West, “Improved Solvent Extraction Process for Co-Ni Separation by Use of DI(2-Ethylhexyl) Phosphoric Acid (D2EHPA),” In: M. J. Jones, Ed., Complex Metallurgy 78, London, 1975, pp. 49-57.
- D. S. Flett and M. T. Anthony, “Cobalt Extractive Metallurgy: A Review,” International Journal of Minerals, Metallurgy and Materials, Vol. 1, No. 2, 1998, pp. 299-312.
- A. Inove, S. Hatae and M. Kwahara, “The Extraction of Ni, Co, and Cu Using Solvent Impregnated Resin-Absorbed LIX 844,” Journal of Mineral Processing, Vol. 114, No. 11, 1988, pp. 819-824.
- N. B. Devi, K.C. Nathsaram and V. Chakravortly, “Separation and Recovery of Co(11) and Ni(11) from Suplhate Solutions Using Sodium Salt of D2EHPA, PC 88A and Cyanex 272,” Hydromet, Vol. 49, No. 1-2, 1998, pp. 49- 61. doi:10.1016/S0304-386X(97)00073-X
- S. Diptesh, K. Rishi, S. Ashoke, P. R. Maulik and R. V. Ji, “Stereoselective Alkenylation of a 1,3-Disubstituted Pyrazol-5-One through Ring Transformation of 2H-Puran-2- Ones,” Terahedron Letters, Vol. 46, No. 22, 2005, pp. 3807-3809. doi:10.1016/j.tetlet.2005.03.207
- P. Sarbani, T. Mareddy and M. S. Devi, “High Speed Synthesis of Pyrazolones Using Microwave-Assisted Heat Reaction Technology,” Journal of the Brazilian Chemical Society, Vol. 19, No. 6, 2008, pp. 1552-1590.
- E. C. Okafor and B. A. Uzoukwu, “Extraction of Fe(III) and U(IV) with 1-Phenyl-3-Methyl-4-Benzoylpyrazolone- 5,” Radiochimica Acta, Vol. 54, No. 4, 1990, pp. 167- 172.
- D. N. Ekekwe, A. J. Arinze, L. A. Nnanna, C. F. Ukpabia and M. O. C. Ogwuegbu, “Synthesis, Complexation and Characterization of 1-Phenyl-3-Methyl-4-(p-Nitrobenzoyl) Pyrazolone-5 and Its Complexes of Ba(II), Sr(II), Zn(II),” American Journal of Chemistry, Vol. 2, No. 2, 2012, pp. 52-56.
- M. O. C. Ogwuegbu and N. C. Oforka, “Solvent Extraction Separation of Fe(III), Co(III), Ni(II) and Cu(II) from Aqueous Solution with 1-Phenyl-3-Methyl-4-(p-Nitroben- zoyl)-5-Pyrazolone,” Hydrometallurgy, Vol. 34, No. 3, 1994, pp. 359-367. doi:10.1016/0304-386X(94)90072-8
- T. Miyasou, A.-H. Kwon, K. Tsuji, Z. Qiu, T. Okumura and Y. Kamiyama, “Edaravone Prevents Fas-Induced Fulminant Hepatic Failure in Mice by Regulating Mitochondrial BCL-XL and BAX,” Shock, Vol. 30, No. 2, 2008, pp. 212-216 .
- A. Mohamed, G. A. Bou-Rahma and A. Alaa, “Synthesis of Novel Pyrazole Derivatives and Evaluation of Their Antidepressant and Anticonvulsant Activities,” European Journal of Medicinal Chemistry, Vol. 44, No. 9, 2009, pp. 3480-3487. doi:10.1016/j.ejmech.2009.01.032