Corrosion Characteristics of As-Cast Aluminium Bronze Alloy in Selected Aggressive Media
- 1 Prototype Engineering Development Institute, Ilesa, Nigeria
- 2 Metallurgical & Materials Engineering Department, Federal University of Technology, Akure, Nigeria
- 3 Metallurgical & Materials Engineering Department, Federal University of Technology, Akure, Nigeria
- 4 Metallurgical & Materials Engineering Department, Federal University of Technology, Akure, Nigeria
Abstract
This research work investigated the corrosion characteristics of aluminium bronze alloy in four selected aggressive media which are H 2 SO 4 , HCl, NaOH, and NaCl. Aluminium bronze alloy was produced locally via sand casting method. Copper coils and aluminium materials which constitute waste to the environment were used in producing the alloy. Test specimens were produced from the as cast alloy and immersed in H 2 SO 4 , HCl, NaOH, and NaCl environment. The concentrations of the environment were varied as 0.1 M, 0.3 M and 0.5 M. The aluminium bronze produced from sand casting has mechanical properties that are closer to the standards proposed by CDA [1]. The corrosion rate was determined by weight loss method at an interval of 3 days. It was observed that the corrosion behaviour exhibited by aluminium bronze in acidic media followed similar trends in 0.1 M, 0.3 M and 0.5 M respectively. However, the corrosion rates increases with increase in the concentration of H 2 SO 4 and NaCl media, but the attack was more aggressive in HCl medium. The aluminium bronze samples in NaOH and H 2 SO 4 media show gradual decolouration from its as-cast yellow golden colour to brown and dark colour respectively. NaCl environment shows high resistance to corrosion and slight decolouration effect even at increased concentration.
- Copper Development Association, “Aluminium Bronze Alloys for Industry,” Copper Development Publication, No. 83, 1986, p. 8.
- Copper Development Association, “Welding of Aluminium Bronze,” Copper Development Association Publication, No. 85, 1988, p. 2.
- Gareth Hinds, “The Electrochemistry of Corrosion,” Corrosion Doctors Publications, 1996, pp. 4-5.
- Copper Development Association, “Aluminium Bronze-Essential for Industry,” CDA Publication, No. 86, 1989, p. 2.
- H. J. Meigh, “Designing Aluminium Bronze Castings,” Engineering Technical File No. 116, Copper Development Association, 1983, pp. 5-16.
- H. S. Campbell, “Aluminium Bronze Alloys Corrosion Resistance Guide,” Copper Development Association Publication, No. 80, 1981, pp. 6-22.
- C. Powell and H. Stillman, “Corrosion Behaviour of Copper Alloys Used in Marine Aquaculture,” International Copper Association, Ltd., New York, 2009, pp. 1-3.
- ASTM E8, “Physical Testing Standards and Mechanical Testing Standards,” ASTM International, West Conshohocken, 2011. doi:10.1520/E0008_E0008M-11
- H. J. Meigh, “Cast and Wrought Aluminium Bronzes: Properties, Processes and Structure,” Copper Development Association/IOM Communications, London, 2000, pp. 3- 4.