There are mainly two methods of deep drawing analysis: experimental and analytical/numerical. Experimental analysis can be useful in analyzing the process to determine the process parameters that produce a defect free product, and the analytical/numerical modeling can be used to model and analyze the process through all stages of deformation. This approach is less time consuming and more economical. Sheet metal forming often includes biaxial in-plane deformation with non-proportional strain paths. In deep drawing of cylindrical cup, the deformation in the flange is dominated by pure shear deformation, while it changes to plane strain when the material is drawn into the die. This paper deals with the analysis of deep drawing of circular blanks into axi-symmetric cylindrical cup using numerical modeling. The blank drawability has been related both theoretically and experimentally with the initial diameter of the blank and deep drawing parameters. The strains in the radial and circumferential directions have been measured. A correlation on the flange thickness variation by taking into account the work hardening with the analytical and experimental values also has been searched.
KeywordsDeep Drawing Cylindrical CupSheet Metal FormingAnalytical Analysis
H. Sattari, R. Sedaghati and R. Ganesan, “Analysis and Design Optimization of Deep Drawing Process. Part 1. Three Dimensional Finite Element and Sensitivity Analysis,” Journal of Materials Processing Technology, Vol. 184, No. 1-3, 2007, pp. 84-92. http://dx.doi.org/10.1016/j.jmatprotec.2006.11.008
B. Kroplin and E. Luckey “Metal Forming Process Simulation in Industry,” International Conference and Workshop, Baden, 1994, pp. 28-30.
J. K. Lee, G. L. Kinzel and R. Wagoner, “Numerical Simulation of 3D Sheet Metal Forming Processes, Verifica- tion of Simulations with Experiments,” 3rd International Conference on NUMISHEET 96, the Ohio State Univer- sity, Dearborn, 29 September-3 October 1996, pp. 128-135.
J. C. Gerdeen and P. Chen, “Geometric Mapping Method of Computer Modeling of Sheet Metal Forming,” NU-MISHEET 89, Seoul, 23 June 1989, pp. 437-444.
K. Chung and D. Lee, “Computer-Aided Analysis of Sheet Material Forming Processes,” 1st International Conference on Technology of Plasticity, Vol. 1, Tokyo, 1984, pp. 660-665.
M. P. Sklad and B. A. Yungblud, “Analysis of Multioperation Sheet Forming Processes,” NUMISHEET 92, Sophia Antipolis, 13-18 September 1992, pp. 543-547.
K. Chung and O. Richmond, “Sheet Forming Process Design on Ideal Forming Theory,” NUMISHEET 92, Sophia Antipolis, 13-18 September 1992, pp. 455-460.
J. L. Batoz, P. Duroux, Y. Q. Guo and J. M. Detraux, “An Efficient Algorithm to Estimate the Large Strains in Deep Drawing,” NUMISHEET 89, Seoul, 23 June 1989, pp. 383-388.
J. L. Batoz, H. Naceur, O. Barlet, Y. Q. Guo and C. Knopf-Lenoir, “Optimum Design of Blank Contours in Axi-Symmetrical Deep Drawing Process,” In: Z. Wan-Xie, C. Geng-Dong and X.-K. Li, Eds., Advances in Computational Mechanics, International Academic Publisher, Beijing, 1996, pp. 113-125.
Y. Q. Guo, J. L. Batoz, H. Naceur, S. Bouabdallah, F. Mercier and O. Barlet, “Recent Developments on the Analysis and Optimum Design of Sheet Metal Forming Parts Using a Simplified Inverse Approach,” Computers & Structures, Vol. 78, No. 1-3, 2000, pp. 133-148. http://dx.doi.org/10.1016/S0045-7949(00)00095-X
H. Naceur, A. Delameziere, J. L. Batoz, Y. Q. Guo and C. Knopf-Lenoir, “Some Improvements on the Optimum Process Design in Deep Drawing Using the Inverse Approach,” Journal of Materials Processing Technology, Vol. 146, No. 2, 2004, pp. 250-262. http://dx.doi.org/10.1016/j.jmatprotec.2003.11.015
O. Barlet, J.-L. Batoz, Y. Q. Guo, F. Mercier, H. Naceur and C. Knopf-Lenoir, “The Inverse Approach and Mathematical Programming Techniques for Optimum Design of Sheet Forming Parts,” ESDA 96’, 3rd Biennial European Joint Conference on Engineering Systems Design and Analysis, Montpellier, Vol. 3, 1-4 July 1996, pp. 227-232.
X. Chateau, “A Simplified Approach for Sheet Forming Processes Design,” International Journal of Mechanical Sciences, Vol. 36, No. 6, 1994, pp. 579-597. http://dx.doi.org/10.1016/0020-7403(94)90033-7
G. Dhatt, G. Touzot and S. A. Maloine, “Unepresentation de la Methode des Elements Finis,” L’Universit′e Laval Qu′ebec, Paris, 1981.
J. L. Batoz and G. Dhatt, “Modelisation des Structures Par Elements Finis, Vol. 3,” Coques, Ed., Hermes, Paris, 1992.
E. Onate, M. Kleiber and C. Agelet de Saracibar, “Plastic and Viscoplastic Flow of Void-Containing Metals. Applications to Axisymmetric Sheet Forming Problems,” In- ternational Journal for Numerical Methods in Engineering, Vol. 25, No. 1, 1988, pp. 227-251. http://dx.doi.org/10.1002/nme.1620250118
H. Matthies and G. Strang, “The Solution of Nonlinear Finite Element Equations,” International Journal for Numerical Methods in Engineering, Vol. 14, No. 11, 1979, pp. 1613-1626. http://dx.doi.org/10.1002/nme.1620141104
D. R. J. Owen and E. Hinton, “Finite Elements in Plasticity: Theory and Practice,” Pineridge Press, Swansea, 1980.
D. Peric, D. R. J. Owen and M. E. Honnor, “Simulation of Thin Sheet Metal Forming Processes Employing a Thin Shell Element. FE Simulation of 3-D Sheet Metal Forming Processes in Automotive Industry,” VDI Verlag, Zurich, 1991, pp. 569-600.
H. D. Hibbitt, P. V. Marcal and J. R. Rice, “A Finite Element Formulation for Problems of Large Strain and Large Displacement,” International Journal of Solids and Structures, Vol. 6, No. 8, 1970, pp. 1069-1086. http://dx.doi.org/10.1016/0020-7683(70)90048-X
R. M. McMeeking and J. R. Rice, “Finite-Element Formulations for Problems of Large Elastic-Plastic Deformation,” International Journal of Solids and Structures, Vol. 11, No. 5, 1975, pp. 601-616. http://dx.doi.org/10.1016/0020-7683(75)90033-5
K. Washizu, “Variational Methods in Elasticity and Plasticity,” 3rd Edition, Pergamon Press, Oxford, 1982.
E. H. Lee, “Elastic-Plastic Deformation at Finite Strains,” Journal of Applied Mechanics, Vol. 36, No. 1, 1969, pp. 1-6. http://dx.doi.org/10.1115/1.3564580
T. J. Chung, “Continuum Mechanics,” Prentice Hall, Upper Saddle River, 1988.
J. S. Arora, “Introduction to Optimum Design,” McGraw-Hill, New York, 1989.
G. N. Vanderplaats, “Numerical Optimization Techniques for Engineering Design with Applications,” McGraw-Hill Inc., New York, 1984.
B. H. V. Topping and D. J. Robinson, “Selecting NonLinear Optimization Techniques for Structural Design,” Engineering Computations, Vol. 1, No. 3, 1984, pp. 48-54.
B. Prasad and R. T. Haftka, “Optimal Structural Design with Plate Finite Elements,” Journal of the Structural Division, Vol. 105, No. 11, 1979, pp. 2367-2382.
E. Rohan and J. R. Whiteman, “Shape Optimization of Elastoplastic Structures and Continua,” Computer Methods in Applied Mechanics and Engineering, Vol. 23, 2000, pp. 68-76.
Steel Solution, Deep Drawing, 2010. www.arcelormittal.com/
E. I. Semenov, “Handbook of Sheet Metal Forming,” Machinery-Building, Moscow, 1983.
V. P. Romanovski, “Handbook of Cold Stamping,” Machinery-Building, Moscow, 1979.
Y. T. Kenum, C. T. Wang, M. J. Saran and R. H. Wagner, “Practical Die Design via Section Analysis,” Journal of Material Processing Technology, Vol. 35, No. 1, 1992, pp. 1-36. http://dx.doi.org/10.1016/0924-0136(92)90299-8
E. A. Popov, “Foundations of Sheet Metal Forming Theory,” Machinery-Building, Moscow, 1977.
E. A. Popov and V. G. Kovalyov, “Technology of Sheet Metal Forming,” Bauman MSTU Publication, Moscow, 2003.
M. V. Storoschev and E. A. Popov, “Theory of Metal Forming Proceeding,” Machinery-Building, Moscow, 1977.
W. F. Hosford, “The Mechanics of Crystals and Polycrystals,” Oxford University Press, USA, 1993.
S. Y. Chung and H. W. Swift, “Cup Drawing from a Flat Blank, Part II, Analytical Investigation,” Proceeding of the Institution of Mechanical Engineers, London, June 1951, pp. 211-228.
D. M. Woo, “On the Complete Solution of a Deep-Drawing Problem,” International Journal of Mechanical Science, Vol. 10, No. 2, 1968, pp. 83-94. http://dx.doi.org/10.1016/0020-7403(68)90065-9
S. M. Mahdavian and D. He, “Product Thickness Analysis in Pure Cup Drawing,” Journal of Material Processing Technology, Vol. 51, No. 1-4, 1995, pp. 387-406. http://dx.doi.org/10.1016/0924-0136(94)01586-P
Z. Marciniak, J. L. Duncan and S. J. Hu, “Mechanics of Sheet Metal Forming,” Butterworth-Heinemann, Oxford, 2002
W. F. Hosford and R. M. Caddel, “Metal Forming, Mechanic and Metallurgy,” 3rd Edition, Cambridge University Press, Cambridge, 2007.
E. Nazaryan and V. Konstantinov, “Kinematics of Straining in Deformation Operations of Sheet Stamping,” Bulletin of Machine-Building, Vol. 2, 1999, pp. 35-41.
N. Arab and E. Nazaryan, “Modeling Deep Drawing of Cylindrical Cup,” International Journal of Applied Engineering Research, Vol. 4, 2009, pp. 2487-2496.
N. Arab, “New Theoretical Calculation of Limit Drawing Ratio by Taking into Account Material Parameters Changes during Deep Drawing of Cylindrical Cup,” International Journal of Theoretical and Applied Mechanics, Vol. 5, 2010, pp. 139-146.
N. Arab, E. Nazaryan, M. Arakelyan, and A.Markosyan, “Mechanics of Forming Thin Ring Plates,” IDDRG International Conference, Golden, 1-3 June 2009, paper code C/66/09.
N. Arab and E. Nazaryan, “Stress and Strain Paths in Deep Drawing of Cylindrical Cup,” International Research Journal of Engineering Science, Technology and Innovation (IRJESTI), Vol. 2, No. 3, 2013, pp. 51-56.