Performance Assessment of Selected Nigerian Vegetable Oils as Quenching Media in Hardening Process for Medium Carbon Steel
- 1 Department of Mechanical Engineering, Federal University of Technology, Minna, Nigeria
- 2 Department of Mechanical Engineering, Federal University of Technology, Minna, Nigeria
- 3 Department of Mechanical Engineering, Federal University of Technology, Minna, Nigeria
- 4 Department of Mechanical Engineering, Federal University of Technology, Minna, Nigeria
- 5 Department of Civil and Chemical Engineering, University of South Africa (Unisa), Johannesburg, South Africa
Abstract
A comparative study was carried out to investigate the suitability of some selected Nigerian vegetable oils as alternative quenchant to SAE40 engine oil for industrial heat treatment of Medium Carbon steels. The study involved the characterization of physicochemical properties and fatty acid profile of cotton seed oil, palm kernel oil, neem seed oil and palm oil. The quenching performance of these vegetable oils was conducted at quenchant bath temperatures of 34 o C, 50 o C, 70 o C, and 100 o C. SAE40 engine oil (Standard quenchant) and tap water served as control. The effect of cooling rates of the quenching media on mechanical properties and microstructure of the quenched steel samples were investigated. The results obtained show that the different vegetable oils have different viscosity and viscosity-temperature behavior just as their molecular structures were different. The mechanical properties of the as-quenched specimens in these oils show that the hardness of steel quenched in palm kernel oil was highest 40.85HRC. As received sample absorbed the highest amount of energy (183 J) before fracture while sample quenched in water absorbs least energy (28 J). Hence vegetable oil is suitable as alternative quenchant to petroleum based SAE40 engine oil for quenching medium carbon steels, without cracking or distortion, the most suitable among them being palm kernel oil.
- Adeyemi, M.B. and Adedayo, S.M. (2009) Vegetable Oils as Quenchants for Hardening Medium Carbon Steel. Jour nal of Applied Science and Technology, 14, 74-78.
- Agboola, J.B. (2014) Performance Assessment of Selected Nigerian Vegetable Oils as Quenching Media during Heat Treatment of Medium Carbon Steel. Ph.D. Thesis, Department of Mechanical Engineering, Federal University of Technology, Minna.
- Fadare, D.A., Fadara, T.G. and Akanbi, O.Y. (2011) Effect of Heat Treatment on Mechanical Properties and Microstructure of NST37-2 Steel. Journal of Minerals and Materials Characterization and Engineering, 10, 299-308.
- Fernandez, P. and Prabhu, K.N. (2008) Comparative Study of Heat Transfer and Wetting Behavior of Conventional and Bioquenchants for Industrial Heat Treatment. International Journal of Heat and Mass Transfer, 51, 526-538. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2007.05.018
- Hassan, S.B, Agboola, J.B., Aigbodion, V.S. and Williams, E.J. (2010) Hardening Characteristics of Plain Carbon Steel and Ductile Cast Iron Using Neem Oil as Quenchant. Journal of Minerals and Materials Characterization and Engineering, 5, 31-36.
- Kobasco, N.I., Carvalhode Souza, E., Canale, L.C.F. and Totten, G.E. (2010) Vegetable Oil Quenchants: Calculation and Comparison of the Cooling Properties of a Series of Vegetable Oils. Journal of Mechanical Engineering-Slovenia, 56, 131-142.
- Prabhu, K.N. and Fernandez, P. (2007) Determination of Wetting Behaviour Spread Activation Energy and Quenches Severity of Bioquenchants. Metallurgical and Materials Transaction, 38, 631-640.
- Souza, E.C., Fernandes, M.R., Augustinho, C.M., Campos, F.C. and Totten, G.E. (2009) Comparison of Structure and Quenching Performance of Vegetable Oils. Journal of ASTM International, 6.
- Totten, G.E., Bates, C.E. and Clinton, N.A. (1993) Handbook of Quenchants and Quenching Technology. ASM International, 62, 140-144.