Determination of Work Index of Gyel-Bukuru Columbite Ore in Plateau State, Nigeria
- 1 National Metallurgical Development Centre, Jos, Plateau State, Nigeria
- 2 Metallurgical and Materials Engineering Department, Ahmadu Bello University, Zaria, Nigeria
- 3 Metallurgical and Materials Engineering Department, Ahmadu Bello University, Zaria, Nigeria
- 4 Metallurgical and Materials Engineering Department, Ahmadu Bello University, Zaria, Nigeria
- 5 Metallurgical and Materials Engineering Department, Ahmadu Bello University, Zaria, Nigeria
Abstract
Determination of the work index of Gyel-Buruku columbite ore sample in Plateau state, Nigeria, was investigated. The sample of the columbite ore was sourced from Gyel village in Jos East Local Government Area of Plateau state, Nigeria. The “reference ores (granites)” samples were sourced from Jiche and Gurum villages of Plateau state respectively. The reference ores and columbite ore of known weights were ground and pulverized. 80% passing size for the columbite ore, Jiche and Gurum granites samples was obtained at 100 μm sieve size for the feeds and products respectively. The work indexes of reference ores i.e. Jiche and Gurum granites were used to calculate the work index of the Gyel columbite ore sample. The values of 3.42 kWh/ton and 2.72 kWh/ton were obtained respectively for the two different reference granites ores samples used and 3.07 kWh/ton was calculated as their average and determined as the value of the work index of the Gyel-Bukuru columbite ore sample. This work index value obtained for the Gyel-Buruku columbite ore sample lies favourably within the work indexes of 3.94 - 10.81 kWh/ton for columbite minerals sighted in the literatures.
- Thomas, D.G., Asuke, F. and Yaro, S.A. (2014) Determination of Some Conceptual Mineral Processing Parameters of Soba-Wanka Pyrochlore-Col Tan Mineral Ore Deposit. 2014 Nigeria Engineering Conference, 15-18 August 2014, 2, 32-41.
- Ministry of Mines and Steel Development (2012) Road Map for the Development of Solid Minerals and Metals Sector. Stack Holders Forum, Abuja, 3, 4-9.
- Mallo, S.J. (2007) Mineral and Mining on the Jos Plateau. ACON Publishers, Charlottetown, 7-14.
- Wills, B.A. and Napier-Mum, T.J. (2006) Mineral Processing Technology. 7th Edition, Elsevier Science & Technology Books, Amsterdam, 109-439.
- Mills, C. (2013) Particle Size Distribution and Liberation Size. http://www.technology.infomine.com/enviromine/ard/mineralogy/Size%20&%20liberation
- Magdalimovic, N.M (1989) Calculation of Energy Required for Grinding in a Ball Mill. Journal of Mineral Processing, 25, 41-42. http://dx.doi.org/10.1016/0301-7516(89)90055-0
- One Mine (2010) Summary and Determination of the Bond Work Index Using an Ordinary Laboratory Batch Ball Mill. http://www.onemine.org/search/summary.cmf
- Berry, T.F. and Bruce, R.W. (1966) A Simple Method of Determining the Grindability of Ores. Canadian Mining Journal, 87, 63-65.
- Olatunji, K.J. and Durojaiye, A.G. (2010) Determination of Bond Index of Birnin-Gwari Iron Orein Nigeria. Journal of mineral and Materials Characterization and Engineering, 9, 635-642.
- Weiss, N.L. (1985) Particle Characterization, Mineral Processing Handbook. American Institute of Mining and Metallurgical, 1, 142-156.
- Mathur, G.P. (1985) Terminal Report. Central Metallurgical Research and Development Institute, 2, 12-17.
- Mills, C. (1995) Technical Review of the Acid Rock Drainage (ARD) and Metal Leaching Aspects of the Metallurgical Test Work, Milling Practices and Tailings Monitoring for the Huckleberry Project. Report to BC Ministry of Energy Mines and Petroleum Resources, 1, 34.