Optimization of Process Parameter for Sawdust/Recycled Polyethylene Composites
- 1 Department of Metallurgical and Materials Engineering, Nnamdi Azikiwe University, Awka, Nigeria
- 2 Department of Polymer and Textile Engineering, Nnamdi Azikiwe University, Awka, Nigeria
Abstract
In this paper, Okhuen wood sawdust and recycled polyethylene (RLDPE) were blended and then hot-pressed to produce sawdust/recycled polyethylene composite board. The optimum processing parameters for preparing the composite such as temperature, pressing time, sawdust/RLDPE content and pressure were investigated and optimized using L 9 (3 4 ) Taguchi experimental design orthogonal array. The tensile strength of the various formulations was determined. The results show that those factors made different effects on the tensile strength of the composites. The optimized process conditions obtained are as follows: press time 7 min, press temperature 180°C, saw-dust/RLDPE 60:40%, press pressure 40kg/cm 2 . The average tensile strength of the optimized composite board was 13.991 MPa. The composite board met the standard for general purpose applications.
- Nemli, G. (2003) Effects of Some Manufacturing Factors on the Properties of Particleboard Manufactured from Alder (Alnus glutinosa subsp. Barbata). Turkish Journal of Agriculture and Forestry, 27, 99-104.
- Nemli, G. and Kalaycoglu (2003) Producing Composite Particleboard from Kenaf (Hibiscus cannabinus L.) Stalks. Industrial Crops and Products, 24, 177-180.
- Kruse, K., Thomen, H., Maurer, H., Steffena, A. and Leon-Mendez, R. (1997) Optimization of Particleboard Production by Means of Process Modeling. Holz als Roh- und Werkstoff, 55, 17-24. http://dx.doi.org/10.1007/s001070050218
- Bolton, A.J., Humphrey, P.E. and. Kavvouras, P.K. (1989) The Hot-Pressing of Dry Formed Wood-Based Composites. Part IV. Predicted Variation of Mattress Moisture Content with Time. Holzforschung, 43, 345-349. http://dx.doi.org/10.1515/hfsg.1989.43.6.406
- Nemli, G., Ismail, A. and Zekovic, E. (2007) Evaluation of Some of the Properties of Particle Board as Function of Manufacturing Parameters. Journal of Materials and Design, 28, 1169-1176. http://dx.doi.org/10.1016/j.matdes.2006.01.015
- Taghi, T., Alireza, A. and Gholamzadeh, M. (2011) Evaluation of Surface Roughness and Mechanical Properties of Particle Board Panels Made from Bagasse. Composites Part B: Engineering, 42, 1330-1335. http://dx.doi.org/10.1016/j.compositesb.2010.12.018
- Prakash, S. and Palani Kumar, K. (2010) Modeling for Prediction of Surface Roughness in Drilling MDF Panels Using Response Surface Methodology. Journal of Composite Materials, 45, 1639-1646. http://dx.doi.org/10.1177/0021998310385026
- Fuentes Talavera, F.J., Silva Guzman, J.A., Richter, H.G. and Ramos Quirarte, J. (2007) Effects of Production variables on Bending Properties, Water Absorption and Thickness Swelling of Bagasse/Plastic Composite Boards. Industrial Crops and Products, 26, 1-7. http://dx.doi.org/10.1016/j.indcrop.2006.12.014
- Ben, G. (2005) The Use of Data Compression Measures to Assess Robust Designs. IEEE Transactions on Reliability, 54, 381-388. http://dx.doi.org/10.1109/TR.2005.853280
- Ben-Gal, I., Katz, R. and Bukchin, Y. (2008) Robust Eco-Design: A New Application for Quality Engineering. IIE Transactions, 40, 907-918.
- BS EN 933-2 1996 Test for Geometrical Properties of Aggregates: Determination of Particle Sizes Distribution Test Sieves, Nominal Size Apertures.
- Ross, P.L. (1988) Taguchi Techniques for Quality Engineering. McGraw-Hill Book Company, New York.