Research ArticleOpen AccessGoogle Scholar indexed
The Influence of Heat Treatment on the Caustic Etching Behaviour of the Automotive AA6111 Alloy
The Libyan Petroleum Institute, Tripoli, Libya
School of Materials, The University of Manchester, Manchester, UK
School of Materials, The University of Manchester, Manchester, UK
Innoval Technology Limited, Banbury, UK
- 1 The Libyan Petroleum Institute, Tripoli, Libya
- 2 School of Materials, The University of Manchester, Manchester, UK
- 3 School of Materials, The University of Manchester, Manchester, UK
- 4 Innoval Technology Limited, Banbury, UK
Journal of Minerals and Materials Characterization and Engineering·Volume 04 (2016)·Pages 364–379·Published 19 October 2016·DOI10.4236/jmmce.2016.46030
Copy link · social · email
Abstract
The caustic etching behaviour of the automotive AA6111 alloy with different aging conditions that simulate the various levels of heat input within the heat affected zone during the welding heating cycles has been investigated. The alloy dissolution rate was found to substantially increase with the pre-aging temperature, which enhances precipitation of the cathodic Q -phase and results in depletion of the alloy solid solution in magnesium and silicon. On the other hand, enhancing the kinetics of precipitation at high temperatures induces a more uniform distribution the Q -phase precipitates, which minimizes the potential difference between the interiors and boundaries of the adjacent grains. This was observed to reduce the severity of the surface topography developed by subsequent caustic etching surface pre-treatment.
KeywordsCaustic EtchingHeat TreatmentAA6111<i>Q</i>-Phase
- Cain, R.J. (2006) Aqueous Processing of Corrosion Inhibiting Hybrid Nanocomposite Bulk Coating. MSc Thesis, The University of Cincinnati.
- Ghosh, S. (2007) Effect of Stress on Initiation and Propagation of Localized Corrosion in Alumiumum Alloys. Ph.D. Thesis, School of Engineering, University of Birmingham.
- Spoelstra, M. (2000) Filiform Corrosion of Anodised Aluminium Alloys. Ph.D. Thesis, Delft University of Technology.
- Premendra (2007) Investigation of Surface Layer on Rolled Recycled AA5050 in Relation to Filiform Corrosion. Ph.D. Thesis, Delft University of Technology.
- Buytaert, G., Kernig, B., Brinkman, H. and Terryn, H. (2006) Influence of Surface Pre-Treatments on Disturbed Rolled-In Subsurface Layers of Aluminium Alloys. Surface & Coatings Technology, 201, 2587-2598. http://dx.doi.org/10.1016/j.surfcoat.2006.05.004
- Thompson, G.E. (2006) The Role of Alloying Elements on the Surface Treatment and Finishing of Aluminium. Materials Science Forum, 519-521, 615-620. http://dx.doi.org/10.4028/www.scientific.net/MSF.519-521.615
- Trueba, M. and Trasatti, S. (2010) Study of Al Alloy Corrosion in Neutral NaCl by the Pitting Scan Technique. Materials Chemistry and Physics, 121, 523-533. http://dx.doi.org/10.1016/j.matchemphys.2010.02.022
- Koroleva, E., Thompson, G., Hollrigl, G. and Bloeck, M. (1999) Surface Morphological Changes of Aluminium Alloys in Alkaline Solution: Effect of Second Phase Material. Corrosion Science, 41, 1475-1495. http://dx.doi.org/10.1016/S0010-938X(98)00188-7
- Lunder, O., Olsen, B. and Nisancioglu, K. (2002) Pre-Treatment of AA6060 Aluminium Alloy for Adhesive Bonding. International Journal of Adhesion and Adhesives, 22, 143-150. http://dx.doi.org/10.1016/S0143-7496(01)00049-5
- Lunder, O. (2003) Chromate-Free Pre-Treatment of Aluminium for Adhesive Bonding. Ph.D. Thesis, Norwegian University of Science and Technology.
- Liu, Y., Skeldon, P., Thompson, G., Habazaki, H. and Shimizu, K. (2002) Anodic Film Growth on an Al-21at.%Mg Alloy. Corrosion Science, 44, 1133-1142. http://dx.doi.org/10.1016/S0010-938X(01)00115-9
- Tsangaraki-Kaplanoglou, I., Theohari, S., Dimogerontakis, T., Wang, Y., Kuo, H. and Kia, S. (2006) Effect of Alloy Types on the Anodizing Process of Aluminium. Surface & Coatings Technology, 200, 2634-2641. http://dx.doi.org/10.1016/j.surfcoat.2005.07.065
- Dahlstrøm, M. (2012) Effect of Copper Content on Etching Response of Aluminium in Alkaline and Acid Solutions. MSc Thesis, Norwegian University of Science and Technology.