The aim of this work was the assessment of the removal of air pollutants from mobile sources by commercial carbon nanotubes (CNTs). For this, the nanomaterial was characterized by different techniques: SEM, EDS, TEM, XRD, BET, and Raman. Subsequently, the CNTs were packed in a stainless steel filters which was designed from different prototypes that were developed during the investigation. Tests were performed in the TO-913 Verificenter Macrover Auto SAQ. Inc. de CV. The results revealed that particle type sand CNTs loading had greater effects on the efficiencies than the membrane type sand pore sizes tested. When collecting NO x , the efficiencies were observed relatively lower, below 20% for loadings of 0.3 - 1.5 mg/cm 2 . The studied CNTs were multi-walled: two layers, show a nonlinear growth and morphology varied since they are of different diameters and longitudes, it was observed that half of the nanotubes were coated with amorphous carbon. The composition is mainly carbon and oxygen, iron is also present. The adsorption capacity of CNTs was significantly influenced by the different aspects, like model, brand, fuel, year and the conditions of each car. The removal efficiencies of CNTs filters were shown to range from 10% to 95% in average for the CNTs loadings of 0.2 - 1.6 mg/cm 2 . When collecting CO, CO 2 , NO x , HC, the efficiencies were shown to range from 5% to 60% given similar CNTs loadings used.
Chabaan, F.B., Nuwayhid, I. and Djoundourian, S. (2001) A Study of Social and Economic Implications of Mobile Sources on Air Quality in Lebanon. Transportation Research Part D, 6, 347-355. https://doi.org/10.1016/S1361-9209(01)00004-9
Shohreh, F., Masoud Vesali, N., Mona, C. and Jalal, H. (2011) Improving CO2/CH4 Adsorptive Selectivity of Carbon Nanotubes by Functionalization with Nitrogen-Containing Groups. Chemical Engineering Research and Design, 89, 1669-1675. https://doi.org/10.1016/j.cherd.2010.10.002
Kampa, M. and Castanas, E. (2008) Human Health Effects of Air Pollution. Environmental Pollution, 151, 362-367. https://doi.org/10.1016/j.envpol.2007.06.012
Katsouyanni, K. (2003) Ambient Air Pollution and Health. British Medical Bulletin, 68, 143-156. https://doi.org/10.1093/bmb/ldg028
Joellen, L. (2007) Air Pollution Combustion Emissions: Characterization of Causative Agents and Mechanisms Associated with Cancer, Reproductive, and Cardio-vascular Effects. Mutation Research, 636, 95-133. https://doi.org/10.1016/j.mrrev.2007.08.003
Guihua, W., Song, B. and Joan, M.O. (2009) Identifying Contributions of On-Road Motor Vehicles to Urban Air Pollution Using Travel Demand Model Data. Transportation Research Part D, 14, 168-179. https://doi.org/10.1016/j.trd.2008.11.011
Daponte, C.A., Ordóñez, M.J., Arribas, F., Cambra, K., Iñiguez, C., Cañada, A., Barceló, M.A., Bellido, J., Guillén, J.J., Ballester, F, Sáez, M., Pérez, H.S. and Taracido, T.M. (2003) Relación a corto plazo de la contaminación atmosférica y la mortalidad en 13 ciudades españolas. Medicina Clínica, 121, 684-689. https://doi.org/10.1016/S0025-7753(03)74063-9
Jes, F. (2009) Air Pollution in the Last 50 Years—From Local to Global. Original Atmospheric Environment, 43, 13-22. https://doi.org/10.1016/j.atmosenv.2008.09.061
Somy, A., Mehrnia, M.R., Delavari-Amrei, H., Ghanizadeh, A. and Safari, M. (2009) Adsorption of Carbon Dioxide Using Impregnated Activated Carbon Promoted by Zinc. International Journal of Greenhouse Gas Control, 3, 249-254. https://doi.org/10.1016/j.ijggc.2008.10.003
Budaeva, A.D. and Zoltoev, E.V. (2010) Porous Structure and Sorption Properties of Nitrogen-Containing Activated Carbon. Fuel, 89, 2623-2627. https://doi.org/10.1016/j.fuel.2010.04.016
Thiruvenkatachari, R., Su, S., An, H. and Yu, X.X. (2009) Post Combustion CO2 Capture by Carbon Fibre Monolithic Adsorbents. Progress in Energy and Combustion Science, 35, 438-455. https://doi.org/10.1016/j.pecs.2009.05.003
Arrigo, R., Havecker, M., Wrabetz, S., Blume, R., Lerch, M., McGregor, J., Parrott, E.P.J., Zeitler, J.A., Gladden, L.F., Knop-Gericke, A., Schlogl, R. and Su, D.S. (2010) Tuning the Acid/Base Properties of Nanocarbons by Functionalization via Amination. Journal of the American Chemical Society, 132, 9616-9630. https://doi.org/10.1021/ja910169v
Cinke, M., Li, J., Charles, W., Bauschlicher, J., Ricca, A. and Meyyappan, M. (2003) CO2 Adsorption in Single-Walled Carbon Nanotubes. Chemical Physics Letters, 376, 761-766. https://doi.org/10.1016/S0009-2614(03)01124-2
Liang, Q., Li, Q., Gao, L. and Yu, Z.L. (2001) Carbon Nanotubes Prepared from CO on Pre-Reduced La2NiO4 Perovskite Precursor. Materials Research Bulletin, 36, 471-477. https://doi.org/10.1016/S0025-5408(00)00480-3
De Jong, K. and Geus. J. (2000) Carbon Nanofibers: Catalytic Synthesis and Applications. Catalysis Reviews—Science and Engineering, 42, 481-510. https://doi.org/10.1081/CR-100101954
Nunes, A., Al-Jamal, K., Nakajima, T., Hariz, M. and Kostarelos, K. (2012) Application of Carbon Nanotubes in Neurology: Clinical Perspectives and Toxicological Risks. Archives of Toxicology, 86, 1009-1020. https://doi.org/10.1007/s00204-012-0860-0
Ju-Nam, Y. and Lead, J.R. (2008) Manufactured Nanoparticles: An Overview of Their Chemistry, Interactions and Potential Environmental Implications. Science of the Total Environment, 400, 396-414. https://doi.org/10.1016/j.scitotenv.2008.06.042
Shen, Y. and Bai, J. (2010) A New Kind CO2/CH4 Separation Material: Open Ended Nitrogen Doped Carbon Nanotubes Formed by Direct Pyrolysis of Metal Organic Frameworks. Chemical Communications, 46, 1308-1310. https://doi.org/10.1039/b913820j
Takagi, H., Hatori, H., Soneda, Y., Yoshizawa, N. and Yamada, Y. (2004) Adsorptive Hydrogen Storage in Carbon and Porous Materials. Materials Science and Engineering: B, 108, 143-147. https://doi.org/10.1016/j.mseb.2003.10.095
Yamada, Y. and Ozaki, J. (2003) Nanoporous Carbons. In: Nalwa, H.S., Ed., Encyclopedia of Nanoscience and Nanotechnology, American Scientific Publishers, Los Angeles, CA, 237-262.
Brady-Estévez, A.S., Kang, S. and Elimelech, M. (2008) A Single-Walled-Carbon-Nanotube Filter for Removal of Viral and Bacterial Pathogens. Small, 4, 481-484. https://doi.org/10.1002/smll.200700863
Guan, T. and Yao, M. (2010) Use of Carbon Nanotube Filter in Removing Bioaerosols. Journal of Aerosol Science, 4, 611-620. https://doi.org/10.1016/j.jaerosci.2010.03.002
Wang, Z.L., Poncharal, P. and de Heer, W.A. (2000) Nanomeasurements of Individual Carbon Nanotubes by in Situ TEM. Pure and Applied Chemistry, 72, 209-219. https://doi.org/10.1351/pac200072010209
Bayliss, P. (1986) Mineral Powder Diffraction File Date Book: Swarthmore, PA, Joint Committee on Powder Diffraction Standards (JCPDS).
Arepalli, S., Nikolaev, P., Gorelik, O., Hadjiev, V.G., Holmes, W., Files, B. and Yowell, L. (2004) Protocol for the Characterization of Single-Wall Carbon Nanotube Material Quality. Carbon, 42, 1783-1791. https://doi.org/10.1016/j.carbon.2004.03.038
Ferrari, A. and Robertson, J. (2000) Interpretation of Raman Spectra of Disordered and Amorphous Carbon. Physical Review B, 61, 14095. https://doi.org/10.1103/PhysRevB.61.14095
Vesali-Naseh, M., Khodadadi, A.A., Mortazavi, Y., Pourfayaz, F., Alizadeh, O. and Maghrebi, M. (2010) Fast and Clean Functionalization of Carbon Nanotubes by Dielectric Barrier Discharge Plasma in Air Compared to Acid Treatment. Carbon, 48, 1369-1379. https://doi.org/10.1016/j.carbon.2009.12.027
Zhang, H. B., Lin, G. D., Zhou, Z. H., Dong, X. and Chen, T. (2002) Raman Spectra of MWCNTs and MWCNT Based H2-Adsorbing System. Carbon, 40, 2429-2436. https://doi.org/10.1016/S0008-6223(02)00148-3