Eleven steel grades were designed to be used as metallic interconnects for Solid Oxide Fuel Cells (SOFC). Low carbon, high chromium steel with different additives of niobium, vanadium, aluminum, molybdenum, silicon, manganese and titanium were produced. Phase transformation temperatures; eutectoid temperature (Ac1) and temperature at which transformation of ferrite to austenite is completed during heating (Ac3) were measured by L75-76 dilatometer. The influence of the alloying elements on transformation temperatures was analyzed using MATLab. Considering the interaction between different alloying elements two equations for predicting Ac1 & Ac3 were obtained. The obtained Ac1 & Ac3 by these equations showed more compatibility than that obtained by traditional ones. In addition, the coefficients of thermal expansion of these steel grades were detected. The influences of chemical composition and temperature on the thermal expansion coefficient were analyzed; the obtained equations were verified to certain extent by using several kinds of steels. The predicted values were in good accordance with the experimental results which proof the validation of calculation model.
Wachsman, E.D. and Lee, K.T. (2011) Lowering the Temperature of Solid Oxide Fuel Cells. Science, 334, 935-939. https://doi.org/10.1126/science.1204090
Kosacki, I., Rouleau, C.M., Becher, P.F., Bentley, J. and Lowndes, D.H. (2005) Nanoscale Effects on the Ionic Conductivity in Highly Textured YSZ Thin Films. Solid State Ionics, 176, 1319-1326. https://doi.org/10.1016/j.ssi.2005.02.021
Mauvy, F., Bassat, J.-M., Boehm, E., Manaud, J.-P., Dordor, P. and Grenier, J.-C. (2003) Oxygen Electrode Reaction on Nd2NiO4+δ Cathode Materials: Impedance Spectroscopy Study. Solid State Ionics, 158, 17-28. https://doi.org/10.1016/S0167-2738(02)00689-6
Antoni, L. (2004) Materials for Solid Oxide Fuel Cells: The Challenge of Their Stability. Materials Science Forum, 461-464, 1073-1090. https://doi.org/10.4028/www.scientific.net/MSF.461-464.1073
Kisa, A.E. and Demircan, O. (2017) Synthesis and Characterization of La 0.595 V 0.005 Sr 0.4 CoO 3-δ as a Novel Cathode Material for Solid Oxide Fuel Cells (SOFC). Journal of Sol-Gel Science and Technology, 82, 352-362. https://doi.org/10.1007/s10971-017-4334-y
Wu, J. and Liu, X. (2010) Recent Development of SOFC Metallic Interconnect. Journal of Materials Science and Technology, 26, 293-305. https://doi.org/10.1016/S1005-0302(10)60049-7
Mercadelli, E., Gondolini, A., Pinasco, P. and Sanson, A. (2017) Stainless Steel Porous Substrates Produced by Tape Casting. Metals and Materials International, 23, 184-192. https://doi.org/10.1007/s12540-017-6336-2
Lee, J.-W., Mehran, M.T., Song, R.-H., Lee, S.-B., Lee, J.-W., Lim, T.-H., Park, S.-J., Hong, J.-E. and Shim, J.-H. (2017) Effects of La2O3 Content and Particle Size on the Long-Term Stability and Thermal Cycling Property of La2O3-Dispersed SUS430 Alloys for SOFC Interconnect Materials. Metals and Materials International, 23, 1250-1256. https://doi.org/10.1007/s12540-017-7079-9
Ramanathan, L.V., Pillis, M.F. and Fernandes, S.M.C. (2007) Role of Rare Earth Oxide Coatings on Oxidation Resistance of Chromia-Forming Alloys. Journal of Materials Science, 43, 530-535. https://doi.org/10.1007/s10853-007-1855-8
Fergus, J.W. (2005) Metallic Interconnects for Solid Oxide Fuel Cells. Materials Science and Engineering A, 397, 271-283. https://doi.org/10.1016/j.msea.2005.02.047
Huang, K., Hou, P.Y. and Goodenough, J.B. (2000) Characterization of Iron-Based Alloy Interconnects for Reduced Temperature Solid Oxide Fuel Cells. Solid State Ionics, 129, 237-250. https://doi.org/10.1016/S0167-2738(99)00329-X
Sigghal, S.C. and Dokiya, M. (1999) Solid Oxide Fuel Cells (SOFC VI). Proceeding Volume 99-19. The Electrochemical Society, Inc., Pennington.
Berthod, P. (2005) Kinetics of High Temperature Oxidation and Chromia Volatilization for a Binary Ni-Cr Alloy. Oxidation of Metals, 64, 235-252. https://doi.org/10.1007/s11085-005-6562-8
Asteman, H., Svensson, J.-E., Johansson, L.G. and Norell, M. (1999) Indication of Chromium Oxide Hydroxide Evaporation During Oxidation of 304L at 873 K in the Presence of 10% Water Vapor. Oxidation of Metals, 52, 95-111. https://doi.org/10.1023/A:1018875024306
Brylewski, T., Nanko, M., Maruyama, T. and Przybylski, K. (2001) Application of Fe-16Cr Ferritic Alloy to Interconnector for a Solid Oxide Fuel Cell. Solid State Ionics, 143, 131-150. https://doi.org/10.1016/S0167-2738(01)00863-3
Quadakkers, W.J., Piron-Abellan, J., Shemet, V. and Singheiser, L. (2003) Metallic Interconnectors for Solid Oxide Fuel Cells—A Review. Materials at High Temperatures, 20, 115-127.
Han, M., Peng, S., Wang, Z., Yang, Z. and Chen, X. (2007) Properties of Fe-Cr Based Alloys as Interconnects in a Solid Oxide Fuel Cell. Journal of Power Sources, 164, 278-283. https://doi.org/10.1016/j.jpowsour.2006.10.039
Mattar, T., Ahmed, A. and Ghali, S. (2008) Innovated High Temperature Oxidation-Resistant Cr-Steel. 27th Annual Conference, Corrosion Challenges in Industry, Al-Ismailia, 25-27 November 2008, 1-11.
Ghali, S., Ahmed, A. and Mattar, T. (2017) High Temperature Oxidation of New Developed Cr-Steel Interconnects in Solid Oxide Fuel Cells (SOFCs). 19th International Conference on Electrochemical Methods in Corrosion, Paris, 23-24 February 2017, 2960-2966.
Ahmed, A., El-Fawakhry, M.K., Eissa, M. and Mattar, T. (2016) Thermal Compatibility of Chromium Steel as Metallic In-terconnects for Solid Oxide Fuel Cells. Journal of Basic and Applied Research International, 14, 90-100.
Holcomb, G.R. and Alman, D.E. (2006) Fabrication, Structure and Properties of MoSi2-Base Composites. Scripta Materialia, 54, 1821-1825. https://doi.org/10.1016/j.scriptamat.2006.01.026
Yang, Z., Walker, M.S., Singh, P., Stevenson, J.W. and Norby, T. (2004) Oxidation Behavior of Ferritic Stainless Steels under SOFC Interconnect Exposure Conditions. Journal of the Electrochemical Society, 151, B669-B678. https://doi.org/10.1149/1.1810393
Hammer, J.E., Laney, S.J., Jackson, R.W., Coyne, K., Pettit, F.S. and Meier, G.H. (2007) The Oxidation of Ferritic Stainless Steels in Simulated Solid-Oxide Fuel-Cell Atmospheres. Oxidation of Metals, 67, 1-38. https://doi.org/10.1007/s11085-006-9041-y
Nehrenberg, A.E. (1946) Phosphorus Segregation in Austenite in Ni-Cr Steels. Transactions of AIME, 167, 494.
Andrews, K.W. (1965) Heat Treatment for Improvement in Low Temperature Mechanical Properties of 0.40 pct C-Cr Steels. The Journal of the Iron and Steel Institute, 203, 721.
Wang, X. (1987) Metal Material Science. Machine Press, Beijing. (In Chinese)
Xie, H., Wu, X. and Min, Y. (2008) Influence of Chemical Composition on Phase Transformation Temperature and Thermal Expansion Coefficient of Hot Work Die Steel. Journal of Iron and Steel Research, International, 15, 56-61. https://doi.org/10.1016/S1006-706X(08)60267-8