This study focuses on mineralogical and chemical characterization of clay of Sitakunda anticline, Bangladesh and potential suitability of this shale as raw materials in ceramic industries. The shale which is clay in texture is composed of chlorite and kaolinite with common illite, smectite, quartz, mica and feldspar. There are two types of samples in color, grey and red. Chemical compositions of clay samples are analyzed by XRF and mineralogical composition of sample analyzed by XRD. Clay samples contain significant amount SiO 2 , Al 2 O 3 and Fe 2 O 3 with other minor compounds. The plasticity index (12.08 and 16.37) indicates medium ranges of the plasticity of clay. To determine the suitability of ceramic materials, samples were made in a rectangular shape for firing 850°C to 1100°C temperature. The samples were tested for different physical properties such as compressive strength, linear shrinkage, water absorption, porosity and bulk density. Low linear firing shrinkage (0.7% to 2.69%) and water absorption (1.5% to 11%) of the developed ceramic bodies were observed. Scanning Electron Microscope photographs confirm the vitrification of the ceramic bodies. The chemical, physical and ceramic properties of these clays indicate their suitability as raw materials for the production of a wide range of ceramic materials.
Hajjaji, M., Kacim S. and Boulmane, M. (2002) Mineralogy and Firing Characteristics of a Clay from the Valley of Ourika (Morocco). Applied Clay Science, 21, 203-212. https://doi.org/10.1016/S0169-1317(01)00101-6
Bauluz, B., Mayayo, M.J., Fernández -Nieto, C., Cultrone, G. and González López, J.M. (2003) Assessment of Technological Properties of Calcareous and Non-Calcareous Clays Used for the Brick-Making Industry of Zaragoza (Spain). Applied Clay Science, 2, 121-126. https://doi.org/10.1016/S0169-1317(03)00152-2
Lucas, J. (2003) Azulejos ou Ladrilhos Ceramicos, Descricao Geral, Exigencias Normativas, Classificacao Funcional. LNEC, Lisboa.
Verduch A.G. ,et al. (1995)Características de las Arcillas Empleadas en la Fabric ación de Ladrillos Técnica Cerámica 232, 214-228.
Fabbri, B. (1994) Quality Assurance of Ceramic Clays—A Deeper Understanding. Schmid, Freiburg, Allemagne.
Mortland, M., Shaobai, S. and Boyd, S. (1986) Clay Organic Complexes as Adsorbants for Phenols and Chlorophenols. Clays and Clay Minerals, 34, 581-585. https://doi.org/10.1346/CCMN.1986.0340512
Baccoura, H., Medhioub, M., Jamoussi, F. and Mhiri, T. (2009) Influence of Firing Temperature on the Ceramic Properties of Triassic Clays from Tunisia. Journal of Materials Processing Technology, 209, 2812-2817. https://doi.org/10.1016/j.jmatprotec.2008.06.055
Mahmood, M.A.A., Rahman, M.S. and Zaman, T. (2013) Ceramics in Bangladesh: Its Recent Evolution and Future Prospect. International Conference of Mechanical, Industrial and Materials Engineering, RUET, Rajshahi, 1-3 November 2013, 729-732.
Uddin, A. and Lundberg, N. (1998) Unroofing History of the Eastern Himalaya and the Indo-Burman Ranges: Heavy-Mineral Study of Cenozoic Sediments from the Bengal Basin, Bangladesh. Journal of Sedimentary Research, 68, 465-472. https://doi.org/10.2110/jsr.68.465
Alam, M. (1989) Geology and Depositional History of Cenozoic Sediments of the Bengal Basin of Bangladesh. Palaeogeography, Palaeoclimatology, Palaeoecology, 69, 125-139. https://doi.org/10.1016/0031-0182(89)90159-4
Bakhtine M.I. ,et al. (1966)Major Tectonic Features of Pakistan, Part-2 Eastern Province Science and Industry 4, 89-100.
Mominullah, M. (1978) Geology of the Northern Part of Chittagong District, Bangladesh. Records of the Geological Survey of Bangladesh, 22, 18.
Reimann, K.U. (1993) Geology of Bangladesh, Stuttgart. Gebruder-Borntrager, Berlin.
Holtrop, J.F. and Keizer, J. (1970) Some Aspects of the Stratigraphy and Correlation of the Surma Basin Wells, East Pakistan. ECAFE Mineral Resources Development Series, 36, 143-154.
Imam, M.B. and Shaw, H.F. (1987) Diagenetic Controls on the Reservoir Properties of Gas Bearing Neogene Surma Group Sandstones in the Bengal Basin, Bangladesh. Marine and Petroleum Geo, 4, 103-110. https://doi.org/10.1016/0264-8172(87)90026-2
Rahman, M.J.J., Faupl, P. and Alam, M.M. (2009) Depositional Facies of the Subsurface Neogene Surma Group in the Sylhet Trough of the Bengal Basin, Bangladesh: Record of Tidal Sedimentation. International Journal of Earth Sciences, 98, 1971-1980. https://doi.org/10.1007/s00531-008-0347-7
Rahman, M.J.J. and McCann, T. (2012) Diagenetic History of the Surma Group Sandstones (Miocene) in the Surma Basin, Bangladesh. Journal of Asian Earth Sciences, 45, 65-78. https://doi.org/10.1016/j.jseaes.2011.09.019
ASTM, Designation: C 20-00 (2010) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water.
Costa, F.B., Teixeira, S.R., Souza, A.E. and Santos, G.T.A. (2009) Recycling of Glass Cullet as Aggregate for Clays Used to Produce Roof Tiles. Materia, 14, 1146-1153.
Holtz, R.D. and. Kovacs, W.D. (1981) An Introduction to Geotechnical Engineering. Prentice Hall, Englewood Cliffs.
Dondi, M., Fabbri, B. and Laviano, R. (1992) Characteristics of the Clays Utilized in the Brick Industry in Apulia and Basilicata (Southern Italy). Mineralogica et Petrographica Acta, 35, 181-191.
Ekosse, G.E. and Mulaba, A. (2008) Granulometric Evaluation of Continental Bentonites and Kaolin for Ceramic Applications. Journal of Applied Sciences, 8, 1021-1027. https://doi.org/10.3923/jas.2008.1021.1027
Parras, J., Sanchez, C., Rodas, M. and Luque, F.J. (1996) Ceramic Applications of Middle Ordovician Shales from Central Spain. Applied Clay Science, 11, 25-41. https://doi.org/10.1016/0169-1317(96)00003-8
Imam M.B. ,et al. (1989)Clay Minerals in Sandstones from Bhuban and Bokabil Formations: Implications in Petroleum Geology Bangladesh Journal of Geology 8, 1-11.
Rahman, M.J.J. and Faupl, P. (2003) The Composition of the Subsurface Neogene Shales of the Surma Group from the Sylhet Trough, Bengal Basin, Bangladesh. In: Alam, M.M. and Curray, J.R., Eds., Sedimentary Geology of the Bengal Basin, Bangladesh, in Relation to the Asia-Greater India Collision and the Evolution of the Eastern Bay of Bengal, Sedimentary Geology, Elsevier Science, Amsterdam, 155/3-4, 407-417.
Dondi, M., Raimondo, M. and Zanelli, C. (2014) Clays and Bodies for Ceramic Tiles: Reappraisal and Technological Classification. Applied Clay Science, 96, 91-109. https://doi.org/10.1016/j.clay.2014.01.013
Junkes, J.A., Carvalho, M.A., Segadães, A.M. and Hotza, D. (2011) Ceramic Tile Formulations from Industrial Waste. Interceram, 60, 36-41.
Aramide F.O. ,et al. (2015)Effects of Sintering Temperature on the Phase Developments and Mechanical Properties Ifon Clay Leonardo Journal of Sciences 26, 67-82.
Kamseu, E., Leonelli, C., Boccaccini, D.N., Veronesi, P., Miselli, P. and Pellacani, G. (2007) Characterisation of Porcelain Compositions using Two China Clays from Cameroon. Ceramics International, 33, 851-857. https://doi.org/10.1016/j.ceramint.2006.01.025
Ferrari, S. and Gualtieri, A.F. (2006) The Use of Illitic Clays in the Production of Stoneware Tile Ceramics. Applied Clay Science, 32, 73-81.
Schneider, H. and Rager, H. (1986) Iron Incorporation in Mullite. Ceramics International, 12, 117-125. https://doi.org/10.1016/0272-8842(86)90034-9